Jun Wang

Emeritus Professor

Emeritus Professor Jun Wang is with the School of Mechanical & Manufacturing Engineering

Contact E-mail: jun.wang@unsw.edu.au (***NO longer take new research students***)

 

Professor Jun Wang has been a member of the academic staff in the Ocean University of China (1982-1988), the University of Melbourne (1993-1995), Queensland University of Technology (1995-2005) and UNSW (Feb 2005-Dec 2020). He is now an Emeritus Professor of UNSW. He is a fellow and CPEng of the The Institution of Engineers Australia and a fellow of the International Society of Nanomanufacturing, and has served as the Chairman of the International Committee for Abrasive Technology (2011-2015), President of the Ausinan Science and Technology Society (2013-2015) and a member of the Mechanical College Board of The Institution of Engineers Australia (2013-2020). He has also been actively engaged in the profession by serving as the Editor-in-Chief or an Associate Editor for 6 international journals and chairing/co-chairing 25 international conferences between 1999 and 2019.

To December 2020, Professor Wang has had over 500 publications, including more than 360 refereed journal articles, 27 edited books and conference proceedings, a single-authored monograph and four book chapters. 

Journal articles
add
Chen Y; Wang J; An Q, 2021, 'Mechanisms and predictive force models for machining with rake face textured cutting tools under orthogonal cutting conditions', International Journal of Mechanical Sciences, vol. 195, http://dx.doi.org/10.1016/j.ijmecsci.2020.106246
2021
Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2021, 'Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining', Journal of Intelligent Manufacturing, vol. 32, pp. 77 - 90, http://dx.doi.org/10.1007/s10845-020-01559-0
2021
Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case based reasoning method and its application in estimation of surface quality toward intelligent machining', Journal of Intelligent Manufacturing, vol. 32, pp. 313 - 327, http://dx.doi.org/10.1007/s10845-020-01573-2
2021
Zhang R; Huang C; Wang J; Feng S; Zhu H, 2021, 'Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation', Materials Science in Semiconductor Processing, vol. 121, http://dx.doi.org/10.1016/j.mssp.2020.105299
2021
Gao T; Li C; Yang M; Zhang Y; Jia D; Ding W; Debnath S; Yu T; Said Z; Wang J, 2021, 'Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant', Journal of Materials Processing Technology, vol. 290, http://dx.doi.org/10.1016/j.jmatprotec.2020.116976
2021
Li M; Nguyen T; Wang J, 2021, 'Strip formation mechanisms and characteristics models in 3D printing of viscous polymer inks', Journal of Manufacturing Processes, vol. 69, pp. 331 - 339, http://dx.doi.org/10.1016/j.jmapro.2021.08.009
2021
Xu L; Huang C; Niu J; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case-based reasoning method and its application to predict machining performance', Soft Computing, vol. 25, pp. 5683 - 5697, http://dx.doi.org/10.1007/s00500-020-05564-6
2021
Zhang P; Huang C; Zhu H; Wang J; Yao Y; Yao P, 2021, 'The research of tool wear criterion in micro cutting using the elastic recovery ratio of high-strength elastic alloy 3J33B', International Journal of Advanced Manufacturing Technology, vol. 114, pp. 1767 - 1776, http://dx.doi.org/10.1007/s00170-021-06937-3
2021
Xu LH; Huang CZ; Niu JH; Wang J; Liu HL; Wang XD, 2021, 'Prediction of cutting power and surface quality, and optimization of cutting parameters using new inference system in high-speed milling process', Advances in Manufacturing, vol. 9, pp. 388 - 402, http://dx.doi.org/10.1007/s40436-020-00339-6
2021
Liu D; Huang C; Wang J; Zhu H, 2021, 'Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach', Ceramics International, vol. 47, pp. 15165 - 15172, http://dx.doi.org/10.1016/j.ceramint.2021.02.076
2021
Zhang P; Huang C; Zhu H; Wang J; Yao Y; Yao P, 2021, 'Experimental investigation on micro milling holes of high-strength elastic alloy', Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, vol. 47, pp. 132 - 139, http://dx.doi.org/10.13700/j.bh.1001-5965.2019.0650
2021
Hou C; Wang J; Zhang W; Li J; Zhang R; Zhou J; Fan Y; Li D; Dang F; Liu J; Li Y; Liang K; Kong B, 2020, 'Interfacial Superassembly of Grape-Like MnO-Ni@C Frameworks for Superior Lithium Storage', ACS Applied Materials and Interfaces, vol. 12, pp. 13770 - 13780, http://dx.doi.org/10.1021/acsami.9b20317
2020
Yun H; Zou B; Wang J; Huang C; Xing H; Shi Z; Xue K, 2020, 'Design and fabrication of graded cBN tool materials through high temperature high pressure method', Journal of Alloys and Compounds, vol. 832, pp. 154937 - 154937, http://dx.doi.org/10.1016/j.jallcom.2020.154937
2020
Liu D; Nguyen T; Wang J; Huang C, 2020, 'Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance', International Journal of Machine Tools and Manufacture, vol. 151, http://dx.doi.org/10.1016/j.ijmachtools.2020.103528
2020
Tangwarodomnukun V; Wang J; Huang CZ; Zhu HT, 2020, 'Corrigendum to “Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates” [Int. J. Mach. Tool Manufact. 79 (2014) 1–16] (International Journal of Machine Tools and Manufacture (2014) 79 (1–16), (S0890695513001995), (10.1016/j.ijmachtools.2013.12.003))', International Journal of Machine Tools and Manufacture, vol. 159, http://dx.doi.org/10.1016/j.ijmachtools.2020.103638
2020
Niu J; Huang C; Li C; Zou B; Xu L; Wang J; Liu Z, 2020, 'A comprehensive method for selecting cutting tool materials', International Journal of Advanced Manufacturing Technology, vol. 110, pp. 229 - 240, http://dx.doi.org/10.1007/s00170-020-05534-0
2020
Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'A novel intelligent reasoning system to estimate energy consumption and optimize cutting parameters toward sustainable machining', Journal of Cleaner Production, vol. 261, http://dx.doi.org/10.1016/j.jclepro.2020.121160
2020
Zhang Z; Yao P; Li X; Wang J; Huang C; Zhu H; Zou B; Liu H, 2020, 'Grinding performance and tribological behavior in solid lubricant assisted grinding of glass-ceramics', Journal of Manufacturing Processes, vol. 51, pp. 31 - 43, http://dx.doi.org/10.1016/j.jmapro.2020.01.020
2020
Abbas CA; Huang C; Wang J; Wang Z; Liu H; Zhu H, 2020, 'Machinability investigations on high-speed drilling of aluminum reinforced with silicon carbide metal matrix composites', International Journal of Advanced Manufacturing Technology, vol. 108, pp. 1601 - 1611, http://dx.doi.org/10.1007/s00170-020-05409-4
2020
Feng S; Zhang R; Huang C; Wang J; Jia Z; Wang J, 2020, 'An investigation of recast behavior in laser ablation of 4H-silicon carbide wafer', Materials Science in Semiconductor Processing, vol. 105, http://dx.doi.org/10.1016/j.mssp.2019.104701
2020
Zhao B; Liu H; Wang J; Huang C; Zhu H; Liu X, 2020, 'Influence of novel sintering process on the densification and microstructures of ceramic composite materials', Ceramics International, vol. 46, pp. 6733 - 6737, http://dx.doi.org/10.1016/j.ceramint.2019.11.162
2020
Zhang C; Zhu H; Jiang Z; Huang C; Wang J, 2020, 'Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter', Materials Science in Semiconductor Processing, vol. 105, http://dx.doi.org/10.1016/j.mssp.2019.104746
2020
Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'Prediction of tool wear width size and optimization of cutting parameters in milling process using novel ANFIS-PSO method', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, http://dx.doi.org/10.1177/0954405420935262
2020
Zhang Z; Yao P; HAUNG C; Wang J; XUE D; DENG W; Zhang Z, 2019, 'Investigation and modeling of microgrooves generated on diamond grinding wheel by abrasive waterjet based on Box–Behnken experimental design', The International Journal of Advanced Manufacturing Technology, vol. 100, pp. 321 - 332, http://dx.doi.org/10.1007/s00170-018-2749-4
2019
Zhao B; Liu H; Huang C; Wang J; Wang B; Hou Y, 2019, 'Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718', International Journal of Advanced Manufacturing Technology, vol. 102, pp. 3431 - 3438, http://dx.doi.org/10.1007/s00170-019-03386-x
2019
Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel', International Journal of Advanced Manufacturing Technology, vol. 104, pp. 585 - 598, http://dx.doi.org/10.1007/s00170-019-03911-y
2019
Thongkaew K; Wang J; Yeoh G, 2019, 'Impact characteristics and stagnation formation on a solid surface by a supersonic abrasive waterjet', International Journal of Extreme Manufacturing, http://dx.doi.org/10.1088/2631-7990/ab531c
2019
Yun H; Zou B; Wang J; Huang C; Li S, 2019, 'Optimization of energy consumption in coating removal for recycling scrap coated cemented carbide tools using hybrid laser-waterjet', Journal of Cleaner Production, vol. 229, pp. 104 - 114, http://dx.doi.org/10.1016/j.jclepro.2019.04.315
2019
Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P; Wang X, 2019, 'Determination of the minimum chip thickness and the effect of the plowing depth on the residual stress field in micro-cutting of 18 Ni maraging steel', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-019-04439-x
2019
Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'Investigation on chip formation and surface integrity in micro end milling of maraging steel', International Journal of Advanced Manufacturing Technology, vol. 102, pp. 1973 - 1984, http://dx.doi.org/10.1007/s00170-018-03219-3
2019
Zhang Z; Yao P; Wang J; Huang C; Cai R; Zhu H, 2019, 'Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material', International Journal of Mechanical Sciences, vol. 157-158, pp. 243 - 253, http://dx.doi.org/10.1016/j.ijmecsci.2019.04.047
2019
Nguyen T; Wang J, 2019, 'A review on the erosion mechanisms in abrasive waterjet micromachining of brittle materials', International Journal of Extreme Manufacturing, vol. 1, pp. 012006 - 012006, http://dx.doi.org/10.1088/2631-7990/ab1028
2019
Chen Y; Wang J; Chen M, 2019, 'Enhancing the machining performance by cutting tool surface modifications: a focused review', Machining Science and Technology, vol. 23, pp. 477 - 509, http://dx.doi.org/10.1080/10910344.2019.1575412
2019
Zhang Z; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B, 2019, 'Nanomechanical characterization of RB-SiC ceramics based on nanoindentation and modelling of the ground surface roughness', Ceramics International, vol. 46, http://dx.doi.org/10.1016/j.ceramint.2019.11.094
2019
Lv Z; Hou R; Tian Y; Huang C; Zhu H; Wang J, 2019, 'Dynamic response of ceramic material subjected to impact of hard particle', Materials Research Express, vol. 6, http://dx.doi.org/10.1088/2053-1591/aafaab
2019
Xu L; Huang C; Su R; Zhu H; Liu H; Liu Y; Li C; Wang J, 2019, 'Estimation of tool life and cutting burr in high speed milling of the compacted graphite iron by de based adaptive neuro-fuzzy inference system', Mechanical Sciences, vol. 10, pp. 243 - 254, http://dx.doi.org/10.5194/ms-10-243-2019
2019
Wang Z; Huang C; Wang J; Zou B, 2019, 'Development of a novel aqueous hydroxyapatite suspension for stereolithography applied to bone tissue engineering', Ceramics International, vol. 45, pp. 3902 - 3909, http://dx.doi.org/10.1016/j.ceramint.2018.11.063
2019
Niu J; Huang C; Su R; Zou B; Wang J; Liu Z; Li C, 2019, 'Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic tools', International Journal of Advanced Manufacturing Technology, vol. 103, pp. 4123 - 4134, http://dx.doi.org/10.1007/s00170-019-03592-7
2019
Yang M; Li C; Zhang Y; Jia D; Li R; Hou Y; Cao H; Wang J, 2019, 'Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions', Ceramics International, vol. 45, pp. 14908 - 14920, http://dx.doi.org/10.1016/j.ceramint.2019.04.226
2019
Wang Z; Huang C; Wang J; Wang P; Bi S; Abbas CA, 2019, 'Design and Simulation of Flow Field for Bone Tissue Engineering Scaffold Based on Triply Periodic Minimal Surface', Chinese Journal of Mechanical Engineering (English Edition), vol. 32, http://dx.doi.org/10.1186/s10033-019-0329-7
2019
Feng S; Huang C; Wang J; Jia Z, 2019, 'Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining', Materials Science in Semiconductor Processing, vol. 93, pp. 238 - 251, http://dx.doi.org/10.1016/j.mssp.2018.12.037
2019
Thongkaew K; Wang J; Li W, 2019, 'An investigation of the hole machining processes on woven carbon-fibre reinforced polymers (CFRPs) using abrasive waterjets', Machining Science and Technology: an international journal, vol. 23, pp. 19 - 38, http://dx.doi.org/10.1080/10910344.2018.1449217
2019
Zhang P; Zhu H; Huang C; Wang J; Yao Y; Yao P, 2018, 'Experimental study on micro milling holes in high-strength elastic alloy 3J33', IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association, vol. 30, pp. 637 - 650
2018
Feng S; Huang C; Wang J; Zhu H, 2018, 'Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process', Materials Science in Semiconductor Processing, vol. 82, pp. 112 - 125, http://dx.doi.org/10.1016/j.mssp.2018.03.035
2018
Lv Z; Hou R; Huang C; Zhu H; Wang J, 2018, 'Investigation on erosion mechanism in ultrasonic assisted abrasive waterjet machining', International Journal of Advanced Manufacturing Technology, vol. 94, pp. 3741 - 3755, http://dx.doi.org/10.1007/s00170-017-0995-5
2018
Chen Y; Li H; Wang J, 2018, 'Predictive modelling of cutting forces in end milling of titanium alloy Ti6Al4V', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 232, pp. 1523 - 1534, http://dx.doi.org/10.1177/0954405416673108
2018
Zhao B; Liu H; Huang C; Wang J; Cheng M; Zhan Q, 2018, 'Evolution mechanisms of high temperature mechanical properties and microstructures of Al2O3/SiCw/TiCnnanocomposite materials', Journal of Alloys and Compounds, vol. 737, pp. 46 - 52, http://dx.doi.org/10.1016/j.jallcom.2017.12.100
2018
Zhang R; Huang C; Wang J; Zhu H; Yao P; Feng S, 2018, 'Micromachining of 4H-SiC using femtosecond laser', Ceramics International, vol. 44, pp. 17775 - 17783, http://dx.doi.org/10.1016/j.ceramint.2018.06.245
2018
Zhu H; Yao P; Wang J, 2018, 'A study of hybrid laser-waterjet micromachining of crystalline germanium', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 232, pp. 1903 - 1917, http://dx.doi.org/10.1177/0954405416654189
2018
Bai X; Huang C; Wang J; Zou B; Liu H, 2018, 'Sintering mechanisms of Al2O3-based composite ceramic tools having 25% Si3N4 additions', International Journal of Refractory Metals and Hard Materials, vol. 73, pp. 132 - 138, http://dx.doi.org/10.1016/j.ijrmhm.2018.01.010
2018
Wang L; Huang C; Wang J; Zhu H; Liang X, 2018, 'An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics', Ceramics International, vol. 44, pp. 5636 - 5645, http://dx.doi.org/10.1016/j.ceramint.2017.12.211
2018
Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2018, 'Crack-healing behavior of Al2O3-TiB2-TiSi2ceramic material', Ceramics International, vol. 44, pp. 2132 - 2137, http://dx.doi.org/10.1016/j.ceramint.2017.10.164
2018
Li H; Wang J; Kwok N; Nguyen T; Yeoh GH, 2018, 'A study of the micro-hole geometry evolution on glass by abrasive air-jet micromachining', Journal of Manufacturing Processes, vol. 31, pp. 156 - 161, http://dx.doi.org/10.1016/j.jmapro.2017.11.013
2018
Nguyen T; Liu D; Thongkaew K; Li H; Qi H; Wang J, 2018, 'The wear mechanisms of reaction bonded silicon carbide under abrasive polishing and slurry jet impact conditions', Wear, vol. 410-411, pp. 156 - 164, http://dx.doi.org/10.1016/j.wear.2018.06.001
2018
Chen Y; Li H; Hou L; Wang J; Bu X, 2018, 'An intelligent chatter detection method based on EEMD and feature selection with multi-channel vibration signals', Measurement: Journal of the International Measurement Confederation, vol. 127, pp. 356 - 365, http://dx.doi.org/10.1016/j.measurement.2018.06.006
2018
Wang Y; Li C; Zhang Y; Yang M; Li BK; Dong L; Wang J, 2018, 'Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials', International Journal of Precision Engineering and Manufacturing - Green Technology, vol. 5, pp. 327 - 339, http://dx.doi.org/10.1007/s40684-018-0035-4
2018
Wang X; Huang C; Zou B; Liu G; Zhu H; Wang J, 2018, 'Experimental study of surface integrity and fatigue life in the face milling of Inconel 718', FRONTIERS OF MECHANICAL ENGINEERING, vol. 13, pp. 243 - 250, http://dx.doi.org/10.1007/s11465-018-0479-9
2018
Wang W; Yao P; Wang J; Huang C; Kuriyagawa T; Zhu H; Zou B; Liu H, 2017, 'Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching', Ceramics International, vol. 43, pp. 10726 - 10736, http://dx.doi.org/10.1016/j.ceramint.2017.05.054
2017
Wang W; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B; Liu Y, 2017, 'Controlled material removal mode and depth of micro cracks in precision grinding of fused silica - A theoretical model and experimental verification', Ceramics International, vol. 43, pp. 11596 - 11609, http://dx.doi.org/10.1016/j.ceramint.2017.05.327
2017
Feng S; Huang CZ; Wang J; Zhu HT, 2017, 'An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining', Precision Engineering, vol. 47, pp. 33 - 45, http://dx.doi.org/10.1016/j.precisioneng.2016.07.002
2017
Feng S; Huang CZ; Wang J; Zhu HT, 2017, 'Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology', Materials Science in Semiconductor Processing, vol. 68, pp. 199 - 212, http://dx.doi.org/10.1016/j.mssp.2017.05.029
2017
Zhao B; Liu H; Huang CZ; Wang J; Cheng M, 2017, 'Fabrication and mechanical properties of Al 2 O 3 -SiC w -TiC np ceramic tool material', Ceramics International, vol. 43, pp. 10224 - 10230, http://dx.doi.org/10.1016/j.ceramint.2017.05.049
2017
Zhu H; Wang J; Yao P; Huang C, 2017, 'Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium', International Journal of Machine Tools and Manufacture, vol. 116, pp. 25 - 39, http://dx.doi.org/10.1016/j.ijmachtools.2017.01.002
2017
Wang RJ; Wang C; Wen W; Wang J, 2017, 'Experimental study on a micro-abrasive slurry jet for glass polishing', International Journal of Advanced Manufacturing Technology, vol. 89, pp. 151 - 162, http://dx.doi.org/10.1007/s00170-016-9109-z
2017
Yun H; Zou B; Wang J, 2017, 'Effects of sintering temperature and nano Ti(C,N) on the microstructure and mechanical properties of Ti(C,N) cermets cutting tool materials with low Ni-Co', Materials Science and Engineering A, vol. 705, pp. 98 - 104, http://dx.doi.org/10.1016/j.msea.2017.08.033
2017
Li L; Wang J, 2017, 'Direct writing of large-area micro/nano-structural arrays on single crystalline germanium substrates using femtosecond lasers', Applied Physics Letters, vol. 110, pp. 251901 - 251901, http://dx.doi.org/10.1063/1.4986784
2017
Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2017, 'Mechanical properties and microstructure of Al2O3-TiB2-TiSi2ceramic tool material', Ceramics International, vol. 43, pp. 14192 - 14199, http://dx.doi.org/10.1016/j.ceramint.2017.07.162
2017
Zhao B; Liu H; Huang C; Wang J; Cheng M, 2017, 'Theoretical hardness analysis and experimental verification for composite ceramic tool materials', Ceramics International, vol. 43, pp. 15580 - 15585, http://dx.doi.org/10.1016/j.ceramint.2017.08.112
2017
Thongkaew K; Wang J, 2017, 'An experimental study of the particle velocities in abrasive waterjets', International Journal of Abrasive Technology, vol. 8, pp. 147 - 156, http://dx.doi.org/10.1504/IJAT.2017.089291
2017
Zhang Y; Li C; Ji H; Yang X; Yang M; Jia D; Zhang X; Li R; Wang J, 2017, 'Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms', International Journal of Machine Tools and Manufacture, vol. 122, pp. 81 - 97, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.002
2017
Yang M; Li C; Zhang Y; Jia D; Zhang X; Hou Y; Li R; Wang J, 2017, 'Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions', International Journal of Machine Tools and Manufacture, vol. 122, pp. 55 - 65, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.003
2017
Jing X; Li H; Wang J; Yuan Y; Zhang D; Kwok N; Nguyen T, 2017, 'An investigation of surface roughness in micro-end-milling of metals', Australian Journal of Mechanical Engineering, vol. 15, pp. 166 - 174, http://dx.doi.org/10.1080/14484846.2016.1211472
2017
Wang RJ; Wang CY; Wen W; Wang J, 2017, 'Experimental study on a micro-abrasive slurry jet for glass polishing', International Journal of Advanced Manufacturing Technology, vol. 89, pp. 451 - 462, http://dx.doi.org/10.1007/s00170-016-9109-z
2017
Feng S; Huang C; Wang J; Zhu H; Yao P; Liu Z, 2017, 'An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining', Precision Engineering, vol. 47, pp. 33 - 45, http://dx.doi.org/10.1016/j.precisioneng.2016.07.002
2017
Wang J; Li W, 2016, 'A new look into the loose particle impact process for ductile materials', Materials Science Forum, vol. 874, pp. 213 - 218, http://dx.doi.org/10.4028/www.scientific.net/MSF.874.213
2016
Huang C; Zou B; Guo P; Liu Y; Huang C; Wang J, 2016, 'Sliding behavior and wear mechanism of iron and cobalt-based high-temperature alloys against WC and SiC balls', International Journal of Refractory Metals and Hard Materials, vol. 59, pp. 40 - 55, http://dx.doi.org/10.1016/j.ijrmhm.2016.05.007
2016
Sui X; Huang C; Zou B; Liu H; Zhu HONGTAO; Wang J, 2016, 'A Hybrid Machining Database System Using Case-based Reasoning and Fuzzy Technology', Key Engineering Materials, vol. 693, pp. 1805 - 1810, http://dx.doi.org/10.4028/www.scientific.net/KEM.693.1805
2016
Xu K; Zou B; Huang C; Zhou HJ; Liu H; Wang J; Zhu H, 2016, 'Study on Micro Milling Tool with Hot-pressed Sintered Ti(C7N3)-based Cermet', Key Engineering Materials, vol. 693, pp. 906 - 913, http://dx.doi.org/10.4028/www.scientific.net/KEM.693.906
2016
Ji W; Zou B; Huang C; Wang J; Xu K; Liu Y; Huang C, 2016, 'Effects of heating rate and metal binder on the microstructure and mechanical properties of self-diffusion gradient cermet composite tool materials', Journal of Alloys and Compounds, vol. 677, pp. 190 - 203, http://dx.doi.org/10.1016/j.jallcom.2016.03.237
2016
Qi H; Fan J; Wang J; Li H, 2016, 'On the erosion process on quartz crystals by the impact of multiple high-velocity micro-particles', Tribology International, vol. 95, pp. 462 - 474, http://dx.doi.org/10.1016/j.triboint.2015.12.003
2016
Wang W; Yao P; Wang J; Huang C; Zhu H, 2016, 'Heat-assisted high efficiency ductile dry grinding of fused silica', Optics and Precision Engineering, vol. 24, pp. 83 - 93, http://dx.doi.org/10.3788/OPE.20162401.0083
2016
Wang X; Huang C; Wang J; Zou B; Liu G; Liu H, 2016, 'Finite element simulation of the cutting process for Inconel 718 alloy using a new material constitutive model', Key Engineering Materials, vol. 693, pp. 1046 - 1053, http://dx.doi.org/10.4028/www.scientific.net/KEM.693.1046
2016
Li W; Zhu H; Wang J; Huang C, 2016, 'Radial-mode abrasive waterjet turning of short carbon–fiber-reinforced plastics', Machining Science and Technology, vol. 20, pp. 231 - 248, http://dx.doi.org/10.1080/10910344.2016.1165836
2016
Liu G; Zou B; Huang C; Wang X; Wang J; Liu Z, 2016, 'Tool damage and its effect on the machined surface roughness in high-speed face milling the 17-4PH stainless steel', International Journal of Advanced Manufacturing Technology, vol. 83, pp. 257 - 264, http://dx.doi.org/10.1007/s00170-015-7564-6
2016
Wang W; Yao P; Wang J; Huang C; Zhu H; Zou B; Liu H; Yan J, 2016, 'Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions', International Journal of Machine Tools and Manufacture, vol. 109, pp. 126 - 136, http://dx.doi.org/10.1016/j.ijmachtools.2016.07.007
2016
Liu D; Huang C; Zhu H; Wang J; Yao P, 2016, 'Investigation on Material Response to Ultrahigh Velocity Impact on Ceramics by Micro Particle', Tribology Letters, vol. 64, pp. 1 - 13, http://dx.doi.org/10.1007/s11249-016-0779-3
2016
Liu D; Zhu H; Huang C; Wang J; Yao P, 2016, 'Prediction model of depth of penetration for alumina ceramics turned by abrasive waterjet—finite element method and experimental study', International Journal of Advanced Manufacturing Technology, vol. 87, pp. 2673 - 2682, http://dx.doi.org/10.1007/s00170-016-8600-x
2016
Xu K; Zou B; Wang Y; Guo P; Huang C; Wang J, 2016, 'An experimental investigation of micro-machinability of aluminum alloy 2024 using Ti(C7N3)-based cermet micro end-mill tools', Journal of Materials Processing Technology, vol. 235, pp. 13 - 27, http://dx.doi.org/10.1016/j.jmatprotec.2016.04.011
2016
Lv Z; Huang C; Zhu H; Wang J; Hou R, 2016, 'A 3D simulation of the fluid field at the jet impinging zone in ultrasonic-assisted abrasive waterjet polishing', The International Journal of Advanced Manufacturing Technology, vol. 87, pp. 3091 - 3103, http://dx.doi.org/10.1007/s00170-016-8722-1
2016
Liu G; Zou B; Huang C; Wang X; Wang J; Liu Z, 2016, 'Tool damage and its effect on the machined surface roughness in high-speed face milling the 17-4PH stainless steel', The International Journal of Advanced Manufacturing Technology, vol. 83, pp. 257 - 264, http://dx.doi.org/10.1007/s00170-015-7564-6
2016
Lv Z; Huang C; Zhu H; Wang J; Yao P; Liu Z, 2015, 'FEM analysis on the abrasive erosion process in ultrasonic-assisted abrasive waterjet machining', The International Journal of Advanced Manufacturing Technology, vol. 78, pp. 1641 - 1649, http://dx.doi.org/10.1007/s00170-014-6768-5
2015
Lv Z; Huang C; Zhu H; Wang J; Wang Y; Yao P, 2015, 'A research on ultrasonic-assisted abrasive waterjet polishing of hard-brittle materials', The International Journal of Advanced Manufacturing Technology, vol. 78, pp. 1361 - 1369, http://dx.doi.org/10.1007/s00170-014-6528-6
2015
Qi H; Fan J; Wang J, 2015, 'A study of the micro-machining process on quartz crystals using an abrasive slurry jet', Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, vol. 229, pp. 421 - 434, http://dx.doi.org/10.1177/0954405414528167
2015
Bai X; Huang C; Wang J; Zou B; Liu H, 2015, 'Fabrication and characterization of Si3N4 reinforced Al2O3-based ceramic tool materials', Ceramics International, vol. 41, pp. 12798 - 12804, http://dx.doi.org/10.1016/j.ceramint.2015.06.115
2015
Li H; Wang J, 2015, 'An experimental study of abrasive waterjet machining of Ti-6Al-4V', International Journal of Advanced Manufacturing Technology, vol. 81, pp. 361 - 369, http://dx.doi.org/10.1007/s00170-015-7245-5
2015
Chen Y; Li H; Wang J, 2015, 'Analytical modelling of cutting forces in near-orthogonal cutting of titanium alloy Ti6Al4V', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 229, pp. 1122 - 1133, http://dx.doi.org/10.1177/0954406214542967
2015
Chen Y; Li H; Wang J, 2015, 'Further development of oxleys predictive force model for orthogonal cutting', Machining Science and Technology, vol. 19, pp. 86 - 111, http://dx.doi.org/10.1080/10910344.2014.991026
2015
Liu H; Shi Q; Huang C; Zou B; Xu L; Wang J, 2015, 'In-situ Fabricated TiB2 Particle-whisker Synergistically Toughened Ti(C, N)-based Ceramic Cutting Tool Material', Chinese Journal of Mechanical Engineering, vol. 28, pp. 338 - 342, http://dx.doi.org/10.3901/CJME.2015.0107.008
2015
Qi H; Fan J; Wang J; Li HUAIZHONG, 2015, 'Impact erosion by high velocity micro-particles on a quartz crystal', Tribology International, vol. 82, pp. 200 - 210, http://dx.doi.org/10.1016/j.triboint.2014.10.016
2015
Wu Q; Wang J; Li H, 2015, 'Temperature evolution and material removal mechanisms in nanosecond pulsed laser ablation of polycrystalline diamond', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 229, pp. 1357 - 1372, http://dx.doi.org/10.1177/0954405414535773
2015
Zou B; Zhou H; Huang C; Xu K; Wang J, 2015, 'Tool damage and machined-surface quality using hot-pressed sintering Ti(C7N3)/WC/TaC cermet cutting inserts for high-speed turning stainless steels', The International Journal of Advanced Manufacturing Technology, vol. 79, pp. 197 - 210, http://dx.doi.org/10.1007/s00170-015-6823-x
2015
Nguyen T; Wang J; Li W, 2015, 'Process models for controlled-depth abrasive waterjet milling of amorphous glasses', International Journal of Advanced Manufacturing Technology, vol. 77, pp. 1177 - 1189, http://dx.doi.org/10.1007/s00170-014-6514-z
2015
Liu H; Chai Y; Huang C; Liu H; Wang J, 2015, 'Effect of boron nitride nanotubes content on mechanical properties and microstructure of Ti(C,N)-based cermets', Ceramics International, vol. 41, pp. 2813 - 2818, http://dx.doi.org/10.1016/j.ceramint.2014.10.101
2015
Zhou H; Huang Chuanzhen ; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effect of ball-milling time on the microstructure and mechanical properties of submicron Ti(C,N)-based cermets', Key Engineering Materials, vol. 589-590, pp. 584 - 589, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.584
2014
Wang XY; Wang J; Xu WJ; Guo DM, 2014, 'Scanning path planning for laser bending of straight tube into curve tube', Optics and Laser Technology, vol. 56, pp. 43 - 51, http://dx.doi.org/10.1016/j.optlastec.2013.07.001
2014
Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'Dynamic fatigue behavior of Al2O3/TiC micro-nano-composite ceramic tool materials at ambient and high temperatures', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, vol. 593, pp. 64 - 69, http://dx.doi.org/10.1016/j.msea.2013.11.035
2014
Li W; Zhu H; Wang J; Huang C, 2014, 'A Surface Roughness Model in Radial-Mode Abrasive Waterjet Turning for High-Tensile Steels', Applied Mechanics and Materials, vol. 483, pp. 177 - 181, http://dx.doi.org/10.4028/www.scientific.net/AMM.483.177
2014
Li W; Wang J; Zhu H; Huang C, 2014, 'On ultrahigh velocity micro-particle impact on steels - A multiple impact study', Wear, vol. 309, pp. 52 - 64, http://dx.doi.org/10.1016/j.wear.2013.10.011
2014
Zou C; Huang C; Zou B; Fei Y; Liu H; Zhu H; Wang J, 2014, 'Establishment of the low defect ceramic cutting tool database', Key Engineering Materials, vol. 589-590, pp. 357 - 360, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.357
2014
Wang X; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'A new method to evaluate the machinability of difficult-to-cut materials', The International Journal of Advanced Manufacturing Technology, vol. 75, pp. 91 - 96, http://dx.doi.org/10.1007/s00170-014-6126-7
2014
Yao P; Wang W; Huang C; Wang J; Zhu H; Zhang Z, 2014, 'High Efficiency Abrasive Waterjet Dressing of Diamond Grinding WheelAdvacned', Advanced Materials Research, vol. 1017, pp. 243 - 248, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.243
2014
Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effects of metal phases and carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets cutting tool materials', Materials Science and Engineering: A, vol. 618, pp. 462 - 470, http://dx.doi.org/10.1016/j.msea.2014.09.052
2014
Jing X; Li H; Wang J; Tian Y, 2014, 'Modelling the cutting forces in micro-end-milling using a hybrid approach', International Journal of Advanced Manufacturing Technology, vol. 73, pp. 1647 - 1656, http://dx.doi.org/10.1007/s00170-014-5953-x
2014
Zhu H; Wang J; Li W; Li H, 2014, 'Microgrooving of Germanium Wafers Using Laser and Hybrid Laser-Waterjet Technologies', Advanced Materials Research, vol. 1017, pp. 193 - 198, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.193
2014
Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'Microstructure and mechanical properties of TiB2-SiC ceramic composites by Reactive Hot Pressing', International Journal of Refractory Metals and Hard Materials, vol. 42, pp. 36 - 41, http://dx.doi.org/10.1016/j.ijrmhm.2013.10.007
2014
Nguyen T; Wang J; Li W, 2014, 'Process models for controlled-depth abrasive waterjet milling of amorphous glasses', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-014-6514-z
2014
Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effect of ball-milling time on the microstructure and mechanical properties of submicron Ti(C, N)-based cermets', Key Engineering Materials, vol. 589-590, pp. 584 - 589, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.584
2014
Wang XY; Huang CZ; Zou B; Zhang QG; Liu HL; Zhu HT; Wang J, 2014, 'Tool life of coated tools in face milling of GH4169 at various cutting speeds', Materials Science Forum, vol. 770, pp. 126 - 129, http://dx.doi.org/10.4028/www.scientific.net/MSF.770.126
2014
Wu Q; Wang J; Huang C, 2014, 'Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 228, pp. 903 - 917, http://dx.doi.org/10.1177/0954405413510290
2014
Zou B; Ji W; Huang C; Li S; Wang J, 2014, 'Study on microstructure and its formation mechanism, and mechanical properties of TiB2-TiC laminated Ti(C5N5) composite ceramic cutting tool material', International Journal of Refractory Metals and Hard Materials, vol. 42, pp. 169 - 179, http://dx.doi.org/10.1016/j.ijrmhm.2013.09.002
2014
Li H; Lee A; Fan J; Yeoh GH; Wang J, 2014, 'On DEM-CFD study of the dynamic characteristics of high speed micro-abrasive air jet', Powder Technology, vol. 267, pp. 161 - 179, http://dx.doi.org/10.1016/j.powtec.2014.07.018
2014
Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'Effects of particulate metallic phase on microstructure and mechanical properties of carbide reinforced alumina ceramic tool materials', Ceramics International, vol. 40, pp. 2809 - 2817, http://dx.doi.org/10.1016/j.ceramint.2013.10.033
2014
Wang Y; Zhu H; Huang C; Wang J; Yao P; Zhang Z, 2014, 'A Study on Erosion of Alumina Wafer in Abrasive Water Jet Machining', Advanced Materials Research, vol. 1017, pp. 228 - 233, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.228
2014
Li H; Jing X; Wang J, 2014, 'Detection and analysis of chatter occurrence in micro-milling process', Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, vol. 228, pp. 1359 - 1371, http://dx.doi.org/10.1177/0954405414522216
2014
Lv Z; Huang C; Zhu H; Wang J; Yao P; Liu ZW, 2014, 'An SPH simulation on vibration assisted abrasive erosion of hard brittle material in abrasive waterjet machining', Advanced Materials Research, vol. 1017, pp. 199 - 204, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.199
2014
Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effects of sintering processes on the mechanical properties and microstructure of Ti(C,N)-based cermet cutting tool materials', International Journal of Refractory Metals and Hard Materials, vol. 47, pp. 71 - 79, http://dx.doi.org/10.1016/j.ijrmhm.2014.06.023
2014
Zou B; Ji W; Huang C; Wang J; Li S; Xu K, 2014, 'Effects of superfine refractory carbide additives on microstructure and mechanical properties of TiB2-TiC+Al2O3 composite ceramic cutting tool materials', Journal of Alloys and Compounds, vol. 585, pp. 192 - 202, http://dx.doi.org/10.1016/j.jallcom.2013.09.119
2014
Song J; Huang C; Lv M; Zou B; Wang S; Wang J; An J, 2014, 'Effects of TiC content and melt phase on microstructure and mechanical properties of ternary TiB2-based ceramic cutting tool materials', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, vol. 605, pp. 137 - 143, http://dx.doi.org/10.1016/j.msea.2014.03.036
2014
Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'Microstructure and mechanical properties of hot pressed TiB2-SiC composite ceramic tool materials at room and elevated temperatures', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, vol. 606, pp. 108 - 116, http://dx.doi.org/10.1016/j.msea.2014.03.084
2014
Song J; Huang C; Lv M; Zou B; Liu H; Wang J, 2014, 'Cutting performance and failure mechanisms of TiB2-based ceramic cutting tools in machining hardened Cr12MoV mold steel', International Journal of Advanced Manufacturing Technology, vol. 70, pp. 495 - 500, http://dx.doi.org/10.1007/s00170-013-5296-z
2014
Tangwarodomnukun V; Wang J; Huang C; Zhu H, 2014, 'Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates', International Journal of Machine Tools and Manufacture, vol. 79, pp. 1 - 16, http://dx.doi.org/10.1016/j.ijmachtools.2013.12.003
2014
Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2014, 'Study on the synthesis and growth mechanisms of the refractory ZrC whiskers', International Journal of Refractory Metals and Hard Materials, vol. 42, pp. 116 - 119, http://dx.doi.org/10.1016/j.ijrmhm.2013.08.011
2014
Zou B; Zhou H; Xu K; Huang C; Wang J; Li S, 2014, 'Study of a hot-pressed sintering preparation of Ti(C7N 3)-based composite cermets materials and their performance as cutting tools', Journal of Alloys and Compounds, vol. 611, pp. 363 - 371, http://dx.doi.org/10.1016/j.jallcom.2014.05.150
2014
Liu D; Huang C; Wang J; Zhu H; Yao P; Liu Z, 2014, 'Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box-Behnken design', Ceramics International, vol. 40, pp. 7899 - 7908, http://dx.doi.org/10.1016/j.ceramint.2013.12.137
2014
Zou C; Huang C; Zou B; Fei Y; Liu H; Zhu H; Wang J, 2014, 'Establishment of the low defect ceramic cutting tool database', Key Engineering Materials, vol. 589-590, pp. 357 - 360, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.357
2014
Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'A study on in-situ synthesis of TiB2-SiC ceramic composites by reactive hot pressing', Ceramics International, vol. 40, pp. 2305 - 2313, http://dx.doi.org/10.1016/j.ceramint.2013.07.152
2014
Yue Z; Huang C; Zhu H; Wang J; Yao P; Liu Z, 2014, 'Optimization of machining parameters in the abrasive waterjet turning of alumina ceramic based on the response surface methodology', International Journal of Advanced Manufacturing Technology, vol. 71, pp. 2107 - 2114, http://dx.doi.org/10.1007/s00170-014-5624-y
2014
Li W; Wang J; Ali YM; Zhu H; Huang C, 2013, 'An investigation into the radial-mode abrasive waterjet turning process on high tensile steels', International Journal of Mechanical Sciences, vol. 77, pp. 365 - 376, http://dx.doi.org/10.1016/j.ijmecsci.2013.05.005
2013
Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'Preparation and characterization of Al2O3/TiC micro-nano-composite ceramic tool materials', Ceramics International, vol. 39, pp. 4253 - 4262, http://dx.doi.org/10.1016/j.ceramint.2012.10.277
2013
Ali MA; Fan JM; Zhu HT; Wang J, 2013, 'A visualization study of the radial-mode abrasive waterjet turning process for alumina ceramics', Advanced Materials Research, vol. 797, pp. 9 - 14, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.9
2013
Qi H; Fan JM; Wang J, 2013, 'Impact erosion of quartz crystals by micro-particles in abrasive waterjet micro-machining', Advanced Materials Research, vol. 797, pp. 46 - 51, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.46
2013
Li ZQ; Wang J; Sun T, 2013, 'Atomistic Simulations of Ultrashort Pulsed Laser Ablation of Polycrystalline Diamond', Current Nanoscience, vol. 9, pp. 804 - 811, http://dx.doi.org/10.2174/157341371130900098
2013
Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2013, 'Study on in-situ synthesis of ZrB2 whiskers in ZrB 2-ZrC matrix powder for ceramic cutting tools', International Journal of Refractory Metals and Hard Materials, vol. 37, pp. 98 - 105, http://dx.doi.org/10.1016/j.ijrmhm.2012.11.001
2013
Li H; Wang J, 2013, 'Assessment of Cutting Forces in High-speed Milling of Inconel 718 Considering the Dynamic Effects', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, pp. 1581 - 1595, http://dx.doi.org/10.1177/0954405413489968
2013
Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'Study of the mechanical properties, strengthening and toughening mechanisms of Al2O3/TiC micro-nano-composite ceramic tool material', Materials Science and Engineering: A, vol. 577, pp. 9 - 15, http://dx.doi.org/10.1016/j.msea.2013.04.033
2013
Xu L; Huang CZ; Liu HL; Zou B; Zhu HT; Wang J, 2013, 'In-situ growth of TiB2 whiskers in TiB2-TiCx matrix powder', Applied Mechanics and Materials, vol. 401-403, pp. 647 - 650, http://dx.doi.org/10.4028/www.scientific.net/AMM.401-403.647
2013
Li WY; Wang J; Li H; Zhu H; Huang C, 2013, 'On ultrahigh velocity micro-particle impact on steels-A single impact study', Wear, vol. 305, pp. 216 - 227, http://dx.doi.org/10.1016/j.wear.2013.06.011
2013
Li HZ; Wang J, 2013, 'A cutting forces model for milling Inconel 718 alloy based on a material constitutive law', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 227, pp. 1761 - 1775, http://dx.doi.org/10.1177/0954406212469167
2013
Fan J; Wang J, 2013, 'Micro-channel fabrication on quartz crystals by a micro abrasive air jet', Advanced Materials Research, vol. 652-654, pp. 2159 - 2163, http://dx.doi.org/10.4028/www.scientific.net/AMR.652-654.2159
2013
Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2013, 'In situ synthesis of ZrB2-ZrCx ceramic tool materials toughened by elongated ZrB2 grains', Materials & Design, vol. 49, pp. 226 - 233, http://dx.doi.org/10.1016/j.matdes.2013.01.062
2013
Fan J; Wang J, 2013, 'Kerf profile characteristics in abrasive air jet micromachining', Advanced Materials Research, vol. 797, pp. 33 - 38, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.33
2013
Manickam S; Wang J; Huang C, 2013, 'Laser-material interaction and grooving performance in ultrafast laser ablation of crystalline germanium under ambient conditions', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, pp. 1709 - 1718, http://dx.doi.org/10.1177/0954405413492322
2013
Wang XY; Luo YH; Wang J; Xu WJ; Guo DM, 2013, 'Scanning path planning for laser bending of straight tube into coil-shape tube', The International Journal of Advanced Manufacturing Technology, vol. 69, pp. 909 - 917, http://dx.doi.org/10.1007/s00170-013-5107-6
2013
Tangwarodomnukun V; Wang J, 2013, 'Optimization of hybrid laser-waterjet micromachining of silicon', Advanced Materials Research, vol. 797, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.3
2013
Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'High temperature mechanical properties of Al2O3/TiC micro-nano-composite ceramic tool materials', Ceramics International, vol. 39, pp. 8877 - 8883, http://dx.doi.org/10.1016/j.ceramint.2013.04.081
2013
Wang X; Huang C; Zou B; Liu H; Wang J, 2013, 'Effects of geometric structure of twist drill bits and cutting condition on tool life in drilling 42CrMo ultrahigh-strength steel', International Journal of Advanced Manufacturing Technology, vol. 64, pp. 41 - 47, http://dx.doi.org/10.1007/s00170-012-4026-2
2013
Yao P; Wei W; Huang CZ; Wang J; Zhu HT; Kuriyagawa T, 2013, 'Indentation crack initiation and ductile to brittle transition behavior of fused silica', Advanced Materials Research, vol. 797, pp. 667 - 672, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.667
2013
Fan J; Wang J, 2013, 'A visualization study of abrasive flow variation in abrasive air jets', Advanced Materials Research, vol. 652-654, pp. 2123 - 2128, http://dx.doi.org/10.4028/www.scientific.net/AMR.652-654.2123
2013
Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2013, 'Preparation of in-situ growth TaC whiskers toughening Al2O3 ceramic matrix composite', INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, vol. 36, pp. 122 - 125, http://dx.doi.org/10.1016/j.ijrmhm.2012.08.003
2013
Lian G; Zhang X; Si H; Wang J; Cui D; Wang Q, 2013, 'Boron nitride ultrathin fibrous nanonets: One-step synthesis and applications for ultrafast adsorption for water treatment and selective filtration of nanoparticles', ACS Applied Materials and Interfaces, vol. 5, pp. 12773 - 12778, http://dx.doi.org/10.1021/am403789c
2013
Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2013, 'Preparation of in-situ growth TaC whiskers toughening Al2O 3 ceramic matrix composite', International Journal of Refractory Metals and Hard Materials, vol. 36, pp. 122 - 125, http://dx.doi.org/10.1016/j.ijrmhm.2012.08.003
2013
Wang X; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature', Materials Science and Engineering: A, vol. 580, pp. 385 - 390, http://dx.doi.org/10.1016/j.msea.2013.05.062
2013
Yun C; Li H; Wang J, 2012, 'Cutting forces and tool wear in dry milling of Ti6A14V', Advanced Materials Research, vol. 565, pp. 454 - 459, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.454
2012
Wu B; Li H; Wang J; Jing X, 2012, 'An Experimental Study of the Effect of Cutting Parameters on Micro Milling Process', Advanced Materials Research, vol. 565, pp. 558 - 563, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.558
2012
Jing X; Li H; Wang J; Liow J, 2012, 'An experimental study of cutting forces in micro end-milling', Advanced Materials Research, vol. 500, pp. 357 - 362, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.357
2012
Li H; Wang J, 2012, 'A study of cutting forces in high-speed dry milling of Inconel 718', Advanced Materials Research, vol. 500, pp. 105 - 110, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.105
2012
Tangwarodonmukun V; Wang J; Huang CZ; Zhu H, 2012, 'An investigation of hybrid laser–waterjet ablation of silicon substrates', International Journal of Machine Tools and Manufacture, vol. 56, pp. 39 - 49, http://dx.doi.org/10.1016/j.ijmachtools.2012.01.002
2012
Li H; Wang J, 2012, 'Study of Abrasive Jet Micromachining for Brittle Materials', Advanced Science Letters, vol. 12, pp. 339 - 342, http://dx.doi.org/10.1166/asl.2012.2772
2012
Chen Y; Li H; Wang J, 2012, 'Cutting forces and tool wear in dry milling of Ti6Al4V', Advanced Materials Research, vol. 565, pp. 454 - 459, http://www.scopus.com/inward/record.url?eid=2-s2.0-84869402345&partnerID=40&md5=6c6ab5c0db4889b1d8232175485a72b5
2012
Song JP; Huang CZ; Zou B; Liu HL; Li L; Wang J, 2012, 'Effects of sintering additives on microstructure and mechanical properties of TiB2–WC ceramic–metal composite tool materials', International Journal of Refractory Metals and Hard Materials, vol. 30, pp. 91 - 95, http://dx.doi.org/10.1016/j.ijrmhm.2011.07.008
2012
Dadkhahipour K; Nguyen T; Wang J, 2012, 'Mechanisms of channel formation on glasses by abrasive waterjet milling', Wear, vol. 292-293, pp. 1 - 10, http://www.scopus.com/inward/record.url?eid=2-s2.0-84864322170&partnerID=40&md5=3da800615fcf4d125f3ab7267ca38ae6
2012
Hao S; Huang CZ; Zou B; Wang J; Liu H; Zhu HT, 2012, 'Three-dimensional simulation of microstructure evolution for three-phase nano-composite ceramic tool materials', Computational Materials Science, vol. 65, pp. 254 - 263, http://dx.doi.org/10.1016/j.commatsci.2012.07.036
2012
Song JP; Huang CZ; Zou B; Liu HL; Wang J, 2012, 'Microstructure and mechanical properties of TiB2¡VTiC¡VWC composite ceramic tool materials', Materials and Design, vol. 36, pp. 69 - 74, http://dx.doi.org/10.1016/j.matdes.2011.11.011
2012
Li WY; Wang J; Ali Y, 2012, 'An Experimental Study of Radial-Mode Abrasive Waterjet Turning of Steels', Materials Science Forum, vol. 697-698, pp. 166 - 170, http://dx.doi.org/10.4028/www.scientific.net/MSF.697-698.166
2012
Zhou TT; Huang CZ; Liu H; Wang J; Zou B; Zhu HT, 2012, 'Crack propagation simulation in microstructure of ceramic tool materials', Computational Materials Science, vol. 54, pp. 150 - 156, http://dx.doi.org/10.1016/j.commatsci.2011.10.039
2012
Pang K; Nguyen T; Fan JM; Wang J, 2012, 'A study of micro-channeling on glasses using an abrasive slurry jet', Machining Science and Technology, vol. 16, pp. 547 - 563, http://dx.doi.org/10.1080/10910344.2012.731947
2012
Keivan D; Nguyen T; Wang J, 2012, 'Mechanisms of channel formation on glasses by abrasive waterjet milling', Wear, vol. 292-293, pp. 1 - 10, http://dx.doi.org/10.1016/j.wear.2012.06.008
2012
Pang K; Nguyen T; Fan J; Wang J, 2012, 'Modelling of the micro-channelling process on glasses using an abrasive slurry jet', International Journal of Machine Tools and Manufacture, vol. 53, pp. 118 - 126, http://dx.doi.org/10.1016/j.ijmachtools.2011.10.005
2012
Yao P; Huang CZ; Wang J; Kuriyagawa T, 2012, 'Thermal Analysis of Multi-Pass Laser Irradiation on Fused Silica', Advanced Materials Research, vol. 565, pp. 621 - 626, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.621
2012
Qi H; Fan J; Wang J, 2012, 'An Experimental Study of the Abrasive Water jet Micro-Machining Process for Quartz Crystals', Advanced Materials Research, vol. 565, pp. 339 - 344, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.339
2012
Li Z; Wang J; Wu Q, 2012, 'Molecular dynamics simulation of the ablation process in ultrashort pulsed laser machining of polycrystalline diamond', Advanced Materials Research, vol. 500, pp. 351 - 356, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.351
2012
Li Q; Huang CZ; Wang J; Zhu H, 2012, 'A Study on the Cross-sectional Shape of Kerf Cut with Micro Abrasive Air Jet', Advanced Materials Research, vol. 500, pp. 236 - 241, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.236
2012
Li Z; Wang J; Wu Q, 2012, 'Ultrashort pulsed laser micromachining of polycrystalline diamond', Advanced Materials Research, vol. 497, pp. 220 - 224, http://dx.doi.org/10.4028/www.scientific.net/AMR.497.220
2012
Zhu H; Huang CZ; Zhang SG; Wang J; Che CL, 2011, 'Experimental Research on the Surface Roughness of Metal Kerf by Abrasive Waterjet Cutting', Advanced Materials Research, vol. 325, pp. 627 - 632, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.627
2011
Fan J; Fan CM; Wang J, 2011, 'Flow Dynamic Simulation of Micro Abrasive Water Jet', Advanced Materials Research, vol. 175, pp. 171 - 176, http://dx.doi.org/10.4028/www.scientific.net/SSP.175.171
2011
Wang J; Zhang Q; Mathew P, 2011, 'Optimization of cutting conditions in drilling operations with plane rake faced twist drills', Machining Science and Technology, vol. 15, pp. 91 - 109, http://dx.doi.org/10.1080/10910344.2011.557971
2011
Fan JM; Li H; Wang J; Wang C, 2011, 'A study of the flow characteristics in micro-abrasive jets', Experimental Thermal and Fluid Science, vol. 35, pp. 1097 - 1106, http://dx.doi.org/10.1016/j.expthermflusci.2011.03.004
2011
Luo W; Wang C; Wang J; Song YX, 2011, 'A study of jet formation for premixed slurry jet nozzle using the discrete phase model', Advanced Materials Research, vol. 325, pp. 638 - 644, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.638
2011
Hao S; Huang CZ; Zou B; Wang J; Liu HL; Zhu HT, 2011, 'Three dimensional simulation of microstructure evolution for ceramic tool materials', Computational Materials Science, vol. 50, pp. 3334 - 3341, http://dx.doi.org/10.1016/j.commatsci.2011.06.025
2011
Wan DP; Wang J; Mathew P, 2011, 'Energy deposition and non-thermal ablation in femtosecond laser grooving of silicon', Machining Science and Technology, vol. 15, pp. 263 - 283, http://dx.doi.org/10.1080/10910344.2011.595324
2011
Wu Q; Wang J, 2011, 'An Experimental Investigation of the Laser Milling Process for Polycrystalline Diamonds', Advanced Materials Research, vol. 291-294, pp. 810 - 815, http://dx.doi.org/10.4028/www.scientific.net/AMR.291-294.810
2011
Wang J; Moridi farimani A; Mathew P, 2011, 'Micro-grooving on quartz crystals by an abrasive air jet', Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, vol. 225, pp. 2161 - 2173, http://dx.doi.org/10.1177/0954406211410260
2011
Che CL; Huang CZ; Wang J; Zhu HT, 2011, 'Study of Abrasive Water Jet Polishing Technology', Key Engineering Materials, vol. 487, pp. 327 - 331, http://dx.doi.org/10.4028/www.scientific.net/KEM.487.327
2011
Luo W; Wang C; Wang J; Song Y, 2011, 'A study of jet formation for premixed slurry jet nozzle using the discrete phase model', Advanced Materials Research, vol. 325, pp. 638 - 644, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.6r38
2011
Dadkhahipour K; Wang J, 2011, 'A Study of Material Removal Process in Abrasive Waterjet Milling', Advanced Materials Research, vol. 325, pp. 621 - 626, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.621
2011
Luo WS; Wang C; Wang J; Song YX, 2011, 'The development of micro abrasive waterjet machining technology', Advanced Materials Research, vol. 188, pp. 733 - 738, http://dx.doi.org/10.4028/www.scientific.net/AMR.188.733
2011
Wang XY; Wang J; Wang LJ; Xu W; Guo D, 2011, 'Scanning Path Planning in Laser Bending of Tube Based on Curvature', Advanced Materials Research, vol. 264-265, pp. 6 - 11, http://dx.doi.org/10.4028/www.scientific.net/AMR.264-265.6
2011
Wang XY; Kang RK; Xu WJ; Guo D; Wang J, 2011, 'A threshold model for laser cleaning of larger silicon wafers', Machining Science and Technology, vol. 15, pp. 415 - 428, http://dx.doi.org/10.1080/10910344.2011.620914
2011
Zhu H; Huang CZ; Wang J; Liu Z; Zhang SG, 2010, 'Erosion Mechanism of Ultrasonic Vibration Abrasive Waterjet in Micro Machining', Key Engineering Materials, vol. 443, pp. 675 - 680, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.675
2010
Fan J; Fan CM; Wang J, 2010, 'Erosion mechanism of brittle glass by micro-abrasive water jet', Diamond & Abrasive Engineering, vol. 30, pp. 1 - 5, http://dx.doi.org/10.3969/j.issn.1006-852X.2010.03.001
2010
Jingming F; Changming F; Jun W, 2010, 'Erosion mechanism of brittle glass by micro-abrasive water jet', Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, pp. 1 - 5, http://dx.doi.org/10.3969/j.issm.1006-852X.2010.03.001
2010
Basak AK; Fan J; Wang J; Mathew P, 2010, 'Material removal mechanisms of monocrystalline silicon under the impact of high velocity micro-particles', Wear, vol. 269, pp. 269 - 277, http://dx.doi.org/10.1016/j.wear.2010.04.006
2010
He L; Sun LM; Zhao XF; Wang J, 2010, 'Effect of grinding wheel diameter change on geometrical parameters of ball-nose end mill', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 97-101, pp. 4527 - 4529, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4527
2010
Zhang Q; Wang J, 2010, 'Geometry, specification and drilling performance of a plane rake faced drill point design', Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, vol. 224, pp. 369 - 378, http://dx.doi.org/10.1243/09544062JMES1767
2010
Pang K; Nguyen T; Fan F; Wang J, 2010, 'Machining of micro-channels on brittle glass using an abrasive slurry jet', Key Engineering Materials, vol. 443, pp. 639 - 644, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.639
2010
Wang X; Wang J, 2010, 'Laser 3D machining with variable process parameters', AIP Conference Proceedings, vol. 1315, pp. 1157 - 1162, http://dx.doi.org/10.1063/1.3552337
2010
Wang J, 2010, 'Depth of cut models for multipass abrasive waterjet cutting of alumina ceramics with nozzle oscillation', Frontiers of Mechanical Engineering in China, vol. 5, pp. 19 - 32, http://dx.doi.org/10.1007/s11465-009-0082-1
2010
Wang XY; Kang RK; Xu WJ; Guo DM; Wang J, 2010, 'Laser cleaning of fine particles on si-wafers', AIP Conference Proceedings, vol. 1315, pp. 1588 - 1593, http://dx.doi.org/10.1063/1.3552416
2010
Li QL; Huang CZ; Wang J; Zhu H; Liu Z, 2010, 'Analysis and modeling of micro abrasive air jet cutting aspect ratio', Advanced Materials Research, vol. 126-128, pp. 35 - 40, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.35
2010
Liu Z; Huang CZ; Wang J; Zhu H; Li QL, 2010, 'Study on machining system of precision micro abrasive water jet and polishing experiment', Key Engineering Materials, vol. 431-432, pp. 102 - 105, http://dx.doi.org/10.4028/www.scientific.net/KEM.431-432.102
2010
Li QL; Huang CZ; Wang J; Zhu H; Liu Z, 2010, 'An experimental study on the kerf characteristics of silicon cut with micro abrasive air jet', Advanced Materials Research, vol. 135, pp. 13 - 17, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.13
2010
Wu Q; Wang J, 2010, 'Development in laser polishing of polycrystalline diamond tools', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 135, pp. 1 - 6, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.1
2010
Tangwarodonmukun V; Wang J; Mathew P, 2010, 'A comparison of dry and underwater laser micromachining of silicon substrates', Key Engineering Materials, vol. 443, pp. 693 - 698, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.693
2010
He L; Zhao XF; Shi HY; Wang J, 2010, 'Research and development of four axis linkage grinding simulation system of ball-nose end mill', Key Engineering Materials, vol. 443, pp. 314 - 317, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.314
2010
Ali Y; Mathew P; Wang J, 2010, 'Progress in the modeling of abrasive jet machining', Advanced Materials Research, vol. 126-128, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.3
2010
Fan J; Fan CM; Wang J, 2010, 'Modeling the material removal rate in micro abrasive water jet machining of glasses', Advanced Materials Research, vol. 135, pp. 370 - 375, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.370
2010
Wan DP; Mathew P; Wang J, 2010, 'Thermal effect analysis of femtosecond laser scribing of silicon', Key Engineering Materials, vol. 443, pp. 687 - 692, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.687
2010
Feng Y; Huang CZ; Wang J, 2010, 'A study on the surface microstructural integrity of ceramics milled with abrasive waterjet', Advanced Materials Research, vol. 135, pp. 64 - 68, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.64
2010
Wang XY; Xu WJ; Wang L; Wang J; Liang Y, 2010, 'Heat Absorbing Rate in Laser Drilling of YG8 Alloy', Advanced Materials Research, vol. 97-101, pp. 4164 - 4167, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4164
2010
Moridi farimani A; Wang J; Ali Y; Mathew P; Li X, 2010, 'A study of abrasive jet micro-grooving of quartz crystals', Key Engineering Materials, vol. 443, pp. 645 - 651, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.645
2010
Feng Y; Huang CZ; Wang J; Zhu H, 2010, 'A study on the abrasive waterjet milling mechanisms of ceramic materials', Key Engineering Materials, vol. 431-432, pp. 261 - 264, http://dx.doi.org/10.4028/www.scientific.net/KEM.431-432.261
2010
Li H; Wang J; Fan J, 2009, 'Analysis and modelling of particle velocities in micro-abrasive air jet', International Journal of Machine Tools and Manufacture, vol. 49, pp. 850 - 858, http://dx.doi.org/10.1016/j.ijmachtools.2009.05.012
2009
Qiu YF; Wang CY; Wang J; Song YX, 2009, 'Masked and unmasked machining of glass by micro abrasive jet', Advanced Materials Research, vol. 69-70, pp. 182 - 186, http://dx.doi.org/10.4028/www.scientific.net/AMR.69-70.182
2009
Huang H; Zhang LC; Wang J; Jiang Z; Zhou L; Xu X; Kuriyagawa T, 2009, 'Advances in Abrasive Technology XII (Editors)', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 76-78, pp. 1 - 730
2009
Li QL; Huang CZ; Wang J; Zhu H; Che CL; Liu Z, 2009, 'Cutting depth model for micro abrasive air jet machining', Manufacturing Technology & Machine Tool [English title] [Chinese title] - Zhizao Jishu yu Jichuang, pp. 88 - 91, http://www.cqvip.com/qk/94897A/200908/index.shtml
2009
Zhu HT; Huang CZ; Wang J; Zhao G; Li QL, 2009, 'Modeling material removal in fracture erosion for brittle materials by abrasive waterjet', Advanced Materials Research, vol. 76-78, pp. 357 - 362, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.357
2009
Qiu Y; Wang C; Song Y; Wang J, 2009, 'Micro channels machined on glass by micro abrasive jet machining', Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, pp. 32 - 37
2009
Wang K; Kang R; Wang J, 2009, 'Influence of abrasive and chemical composition on chemo-mechanical polishing of MgO single crystal substrate', Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, pp. 19 - 23
2009
Wang J, 2009, 'Particle velocity models for ultra-high pressure abrasive waterjets', Journal of Materials Processing Technology, vol. 209, pp. 4573 - 4577, http://dx.doi.org/10.1016/j.jmatprotec.2008.10.021
2009
Fan JM; Wang CY; Wang J, 2009, 'Modelling the erosion rate in micro abrasive air jet machining of glasses', Wear, vol. 266, pp. 968 - 974, http://dx.doi.org/10.1016/j.wear.2008.12.019
2009
Wang J; Nguyen T; Pang K, 2009, 'Mechanisms of microhole formation on glasses by an abrasive slurry jet', Journal of Applied Physics, vol. 105, pp. 1 - 4, http://dx.doi.org/10.1063/1.3079802
2009
Wang J, 2009, 'A focused review on enhancing the abrasive waterjet cutting performance by using controlled nozzle oscillation', Key Engineering Materials, vol. 404, pp. 33 - 44, http://dx.doi.org/10.4028/3-908454-05-0.33
2009
Wang J; Shanmugam DK, 2009, 'Cutting meat with bone using an ultrahigh pressure abrasive waterjet', Meat Science, vol. 81, pp. 671 - 677, http://dx.doi.org/10.1016/j.meatsci.2008.11.010
2009
Zhu HT; Huang CZ; Wang J; Li QL; Che CL, 2009, 'Experimental study on abrasive waterjet polishing for hard-brittle materials', International Journal of Machine Tools and Manufacture, vol. 49, pp. 569 - 578, http://dx.doi.org/10.1016/j.ijmachtools.2009.02.005
2009
Nguyen T; Pang K; Wang J, 2009, 'A preliminary study of the erosion process in micro-machining of glasses with a low pressure slurry jet.', Key Engineering Materials, vol. 389-390, pp. 375 - 380, http://dx.doi.org/10.4028/www.scientific.net/KEM.389-390.375
2009
Tangwarodonmukun V; Wang J, 2009, 'Laser micromachining of silicon substrates', Advanced Materials Research, vol. 76-78, pp. 416 - 421, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.416
2009
Wang J; Zhong Y, 2009, 'Enhancing the depth of cut in abrasive waterjet cutting of alumina ceramics by using multipass cutting with nozzle oscillation.', Machining Science and Technology, vol. 13, pp. 76 - 91, http://dx.doi.org/10.1080/10910340902776085
2009
Nguyen T; Pang K; Wang J, 2009, 'A preliminary study of the erosion process in micro-machining of glasses with a low pressure slurry jet', Key Engineering Materials, vol. 389-390, pp. 375 - 380, http://dx.doi.org/10.4028/0-87849-364-6.375
2009
Wang J, 2009, 'A new model for predicting the depth of cut in abrasive waterjet contouring of alumina ceramics', Journal of Materials Processing Technology, vol. 209, pp. 2314 - 2320, http://dx.doi.org/10.1016/j.jmatprotec.2008.05.021
2009
Kang R; Wang K; Wang J; Guo D, 2008, 'Removal of scratch on the surface of MgO single crystal substrate in chemical mechanical polishing process', Applied Surface Science, vol. 254, pp. 4856 - 4863, http://dx.doi.org/10.1016/j.apsusc.2008.01.150
2008
Sun Y; Wang J; Guo D; Zhang Q, 2008, 'Modeling and numerical simulation for the machining of helical surface profiles on cutting tools', International Journal of Advanced Manufacturing Technology, vol. 36, pp. 525 - 534, http://dx.doi.org/10.1007/s00170-006-0860-4
2008
Wang J; Zhang Q, 2008, 'A study of high-performance plane rake faced twist drills. Part II: Predictive force models', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1286 - 1295, http://dx.doi.org/10.1016/j.ijmachtools.2008.03.006
2008
Fan J; Wang CY; Wang J; Luo GS, 2008, 'Effect of nozzle type and abrasive on machinability in micro abrasive air jet machining of glass', Key Engineering Materials, vol. 359-360, pp. 404 - 408
2008
Fan J; Wang C; Wang J; Luo G, 2008, 'Study on the machining performance of micro abrasive jet machining.', China Mechanical Engineering, vol. 5, pp. 584 - 589
2008
Li QL; Wang J; Huang C, 2008, 'Erosion mechanisms of monocrystalline silicon under a microparticle laden air jet', Journal of Applied Physics, vol. 104, pp. 34903 - 034910, http://dx.doi.org/10.1063/1.2963362
2008
Wang J; Zhang Q, 2008, 'A study of high performance plane rake faced twist drills. Part 1: Geometrical analysis and experimental investigation.', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1276 - 1285, http://dx.doi.org/10.1016/j.ijmachtools.2008.03.005
2008
Wang XY; Wang J; Xu WJ; Wu DJ; Lei MK, 2008, 'A study of laser surface modification for GCr15 steel', International Journal of Materials and Product Technology, vol. 31, pp. 88 - 96
2008
Madadnia J; Shanmugam DK; Nguyen T; Wang J, 2008, 'A study of cavitation induced surface erosion in abrasive waterjet cutting systems.', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 53-54, pp. 357 - 362
2008
Zhu HT; Huang CZ; Wang J; Lu XY; Feng YX, 2008, 'Machinability of glass by abrasive waterjet.', International Journal of Materials and Product Technology, vol. 31, pp. 106 - 112
2008
Liu H; Wang J; Huang C, 2008, 'Abrasive liquid jet as a flexible polishing tool', International Journal of Materials and Product Technology, vol. 31, pp. 2 - 13, http://dx.doi.org/10.1504/IJMPT.2008.015884
2008
Shanmugam DK; Nguyen T; Wang J, 2008, 'A study of delamination on graphite/epoxy composites in abrasive waterjet machining', Composites Part A - Applied Science and Manufacturing, vol. 39, pp. 923 - 929, http://dx.doi.org/10.1016/j.compositesa.2008.04.001
2008
Nguyen T; Shanmugam DK; Wang J, 2008, 'Effect of liquid properties on the stability of an abrasive waterjet', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1138 - 1147, http://dx.doi.org/10.1016/j.ijmachtools.2008.01.009
2008
Shanmugam DK; Wang J; Liu H, 2008, 'Minimisation of kerf tapers in abrasive waterjet machining of alumina ceramics using a compensation technique', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1527 - 1534, http://dx.doi.org/10.1016/j.ijmachtools.2008.07.001
2008
Che CL; Huang CZ; Wang J; Zhu HT; Li QL, 2008, 'Theoretical model of surface roughness for polishing super hard materials with abrasive waterjet.', Key Engineering Materials, vol. 375-376, pp. 465 - 469
2008
Zhu HT; Huang CZ; Wang J; Li QL; Che CL, 2008, 'Experimental study on abrasive waterjet machining mechanisms of brittle materials.', Key Engineering Materials, vol. 375-376, pp. 62 - 66
2008
Hou RG; Huang C; Wang J; Lu XY; Feng YX, 2007, 'Simulation of solid-liquid two-phase flow inside and outside the abrasive water jet nozzle.', Key Engineering Materials, vol. 339, pp. 453 - 457, http://dx.doi.org/10.4028/0-87849-430-8.453
2007
Huang C; Liu H; Wang J; Wang H, 2007, 'Multi-scale and multi-phase nanocomposite ceramic tools and cutting performance', Chinese Journal of Mechanical Engineering, vol. 20, pp. 5 - 7, http://dx.doi.org/10.3901/CJME.2007.05.005
2007
Li QL; Huang C; Wang J; Zhu HT; Che CL, 2007, 'A study on erosion mechanisms of quartz crystals polished by micro abrasive waterjet', Advanced Materials Research, vol. 24-25, pp. 195 - 199, http://dx.doi.org/10.4028/www.scientific.net/AMR.24-25.195
2007
Feng Y; Huang C; Wang J; Zhu H; Hou R, 2007, 'The study on surface shape of Al2 O3 ceramics milled with abrasive waterjet.', Manufacturing Technology & Machine Tool [English title] [Chinese title] - Zhizao Jishu yu Jichuang, vol. 1, pp. 80 - 82
2007
Feng YX; Huang CZ; Wang J; Lu XY; Zhu HT, 2007, 'Surface Characteristics of Ceramics Milled with Abrasive Waterjet Technology', Key Engineering Materials, vol. 329, pp. 335 - 340, http://dx.doi.org/10.4028/www.scientific.net/kem.329.335
2007
Wang J, 2007, 'Predictive depth of jet penetration models for abrasive waterjet cutting of alumina ceramics', International Journal of Mechanical Sciences, vol. 49, pp. 306 - 316, http://dx.doi.org/10.1016/j.ijmecsci.2006.09.005
2007
Feng YX; Huang C; Wang J; Lu XY; Zhu HT, 2007, 'Surface characteristics of ceramics milled with abrasive waterjet technology.', Key Engineering Materials, vol. 329, pp. 335 - 340, http://dx.doi.org/10.4028/0-87849-416-2.335
2007
Huang C; Hou RG; Wang J; Lu XY; Zhu HT, 2007, 'Three-dimensional simulation of liquid-solid two-phase flow inside the abrasive water jet nozzle.', Key Engineering Materials, vol. 329, pp. 329 - 334, http://dx.doi.org/10.4028/0-87849-416-2.329
2007
Feng YX; Huang C; Wang J; Hou RG; Lu XY, 2007, 'An experimental study on milling Al2 O3 ceramics with abrasive waterjet.', Key Engineering Materials, vol. 339, pp. 500 - 504, http://dx.doi.org/10.4028/0-87849-430-8.500
2007
Feng YX; Huang CZ; Wang J, 2007, 'Study of surface quality of ceramics cut by abrasive waterjet', Tool Engineering, vol. 41, pp. 43 - 45
2007
Sun JH; Huang C; Wang J; Liu H; Liu B, 2006, 'Effect of tin AI2O3 on the low temperature degradation of 3Y-TZP', Materials Science Forum, vol. 532-533, pp. 281 - 284
2006
Liu H; Huang C; Wang J; Liu B, 2006, 'Study on the multi-scale nanocomposite ceramic tool material', Key Engineering Materials, vol. 315-316, pp. 118 - 122
2006
Wang J; Gu M; Huang C, 2006, 'Effect of weak-bonding interface on mechanical property of composite ceramic tool material', Tool Engineering, vol. 40, pp. 14 - 16
2006
Sun Y; Wang J; Guo D; Zhang Q, 2006, 'Modeling and numerical simulation for the machining of helical surface profiles on cutting tools', International Journal of Advanced Manufacturing Technology, vol. on-line, pp. 1 - 10
2006
Wang XY; Wang J; Xu WJ; Wu DJ; Lei MK, 2006, 'A study of laser surface modification for GCr15 steel', International Journal of Materials and Product Technology, vol. 31, pp. 88 - 96, http://dx.doi.org/10.1504/IJMPT.2008.015899
2006
Zhu HT; Huang C; Wang J; Lu XY; Feng YX, 2006, 'Machinability of glass by abrasive waterjet', International Journal of Materials and Product Technology, vol. 31, pp. 106 - 112, http://dx.doi.org/10.1504/IJMPT.2008.015901
2006
Liu H; Wang J; Huang C, 2006, 'Abrasive liquid jet as a flexible polishing tool', International Journal of Materials and Product Technology, vol. 31, pp. 2 - 13, http://dx.doi.org/10.1504/IJMPT.2008.015884
2006
Hou RG; Huang C; Wang J; Feng YX; Zhu H, 2006, 'Simulation of velocity field of two-phase flow for gas and liquid in the abrasive water jet nozzle', Key Engineering Materials, vol. 315-316, pp. 150 - 153
2006
Gu M; Huang C; Wang J, 2006, 'Effect of nano-scale Al2O3 on mechanical properties of TiB2 ceramic tool materials', Key Engineering Materials, vol. 315-316, pp. 123 - 126
2006
Sun JH; Huang CZ; Wang J, 2006, 'Effect of TiN addition on the low temperature degradation of ceramic tool materials 3Y-TZP', Key Engineering Materials, vol. 315-316, pp. 40 - 44
2006
Huang C; Wang J; Feng YX; Zhu H, 2006, 'Recent development of abrasive water jet machining technology', Key Engineering Materials, vol. 315-316, pp. 396 - 400
2006
Xu S; Wang J, 2006, 'A study of abrasive waterjet cutting of alumina ceramics with controlled nozzle oscillation', International Journal of Advanced Manufacturing Technology, vol. 27, pp. 693 - 702, http://dx.doi.org/10.1007/s00170-004-2256-7
2006
Sun Y; Wang J; Guo D, 2006, 'Guide curve based interppolation scheme of parametric curves for precision CNC machining', International Journal of Machine Tools and Manufacture, vol. 46, pp. 235 - 242, http://dx.doi.org/10.1016/j.ijmachtools.2005.05.024
2006
Wang J; Liu H, 2006, 'Profile cutting on alumina ceramics by abrasive waterjet. Part 1: Experimental investigation', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, vol. 220, pp. 703 - 714, http://dx.doi.org/10.1243/09544062JMES207A
2006
Zou B; Huang CZ; Wang J; Liu B, 2006, 'Effect of nano-scale TiN on the mechanical properties and microstructure of Si3N4 based ceramic tool materials', Key Engineering Materials, vol. 315-316, pp. 154 - 158
2006
Zhu HT; Huang C; Wang J; Feng YX; Hou RG, 2006, 'Study on cutting coloring stainless steel by abrasive waterjet', Key Engineering Materials, vol. 315-316, pp. 822 - 824
2006
Zhu H; Huang C; Wang J; Feng YX; Hou RG, 2006, 'Theoretical analysis on the machining mechanism in ultrasonic vibration abrasive waterjet', Key Engineering Materials, vol. 315-316, pp. 127 - 130
2006
Liu H; Huang C; Wang J; Teng X, 2006, 'Fabrication and mechanical properties of A12O3/Ti(C0.7N0.3) nanocomposites', Materials Research Bulletin, vol. 41, pp. 1215 - 1224, http://dx.doi.org/10.1016/j.materresbull.2006.01.014
2006
Hou R; Huang C; Wang J; Zhu H; Feng Y, 2006, 'Simulation of gas-solid-liquid three-phase flow inside and outside the abrasive waterjet nozzle', Materials Science Forum, vol. 532-533, pp. 833 - 836
2006
Liu H; Huang C; Wang J; Teng X, 2006, 'Study on the multi-phase and multi-scale nanocomposite ceramic tool material', Materials Science Forum, vol. 532-533, pp. 245 - 248
2006
Huang C; Wang J; Xu L; Wang S, 2006, 'Microstructure and mechanical properties of nano-scale AI2O3 toughened Ti (C,N) matarix cermet tool materials', Materials Science Forum, vol. 532-533, pp. 37 - 40
2006
Fan J; Wang C; Wang J, 2006, 'Micro abrasive jet machining for precision components finishing', Diamond & Abrasive Engineering, vol. 3, pp. 57 - 61
2006
Wang X; Wu YB; Xu W; Wang L; Wang J, 2006, 'Effect of focal offset on energy distribution in laser truing grinding wheel', China Mechanical Engineering, vol. 17, pp. 702 - 705
2006
Sun JH; Huang C; Wang J; Liu H, 2006, 'Mechanical properties and microstructure of ZrO2-TiN-Al2O3 composite ceramics', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 416, pp. 104 - 108, http://dx.doi.org/10.1016/j.msea.2005.10.024
2006
Huang CZ; Hou RG; Wang J; Feng YX, 2006, 'The effect of high pressure abrasive water jet cutting parameters on cutting performance of granite.', Key Engineering Materials, vol. 304-305, pp. 560 - 564
2006
Wang J; Liu H, 2006, 'Profile cutting on alumina ceramics by abrasive waterjet. Part 2: Cutting performance models', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, vol. 220, pp. 715 - 725, http://dx.doi.org/10.1243/09544062JMES207B
2006
Wang J; Liu H, 2005, 'Mathematical models for the hydrodynamic characteristics of abrasive waterjets', Key Engineering Materials, vol. 291-292, pp. 459 - 464, http://www.scopus.com/inward/record.url?eid=2-s2.0-34249339028&partnerID=40&md5=d33a70d3fda2bca15dbe2535416623e1
2005
Wang J; Liu H, 2005, 'Mathematical models for the hydrodynamic characteristics of abrasive waterjets', Key Engineering Materials, vol. 291-292, pp. 459 - 464, http://dx.doi.org/10.4028/0-87849-974-1.459
2005
Wang XY; Wu YB; Kang RK; Wang J; Xu WJ; Kato M, 2005, 'Energy-mode adjustment in laser processing a small vitrified CBN grinding wheel', Key Engineering Materials, vol. 291-292, pp. 177 - 182, http://dx.doi.org/10.4028/0-87849-974-1.177
2005
Wu Y; Wang J; Fan Y; Kato M, 2005, 'Determination of waviness decrease rate by measuring the frequency characteristics of the grinding force in centerless grinding', Journal of Materials Processing Technology, vol. 170, pp. 563 - 569, http://dx.doi.org/10.1016/j.jmatprotec.2004.11.021
2005
Wang XY; Wu YB; Wang J; Xu WJ, 2005, 'Effect of incident angle on laser processing of a small vitrified CBN grinding wheel', Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology, vol. 45, pp. 672 - 675, http://www.scopus.com/inward/record.url?eid=2-s2.0-27944473704&partnerID=40&md5=d88c4c3c7456443d3d6a33414861d694
2005
Fan J; Wang C; Wang J, 2005, 'Development of micro abrasive jet machining technology', Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, pp. 25 - 30+35, http://www.scopus.com/inward/record.url?eid=2-s2.0-15744374118&partnerID=40&md5=7af4a6a0ed755b3ed815d07ac2ac4f55
2005
Wang XY; Wu YB; Wang J; Xu WJ; Kato M, 2005, 'Absorbed energy in laser truing of a small vitrified CBN grinding wheel', Journal of Materials Processing Technology, vol. 164-165, pp. 1128 - 1133, http://dx.doi.org/10.1016/j.jmatprotec.2005.02.108
2005
Wang XY; Wu YB; Kang RK; Wang J; Xu WJ; Kato M, 2005, 'Energy-mode adjustment in laser processing a small vitrified CBN grinding wheel', Key Engineering Materials, vol. 291-292, pp. 177 - 182, http://www.scopus.com/inward/record.url?eid=2-s2.0-33750965875&partnerID=40&md5=13c8adbf078cbd6fc0ac12439d957781
2005
Wang J; Xu S, 2005, 'Enhancing the AWJ cutting performance by multipass machining with controlled nozzle oscillation', Key Engineering Materials, vol. 291-292, pp. 453 - 458, http://dx.doi.org/10.4028/0-87849-974-1.453
2005
Wang J; Xu S, 2005, 'Enhancing the AWJ Cutting Performance by Multipass Machining with Controlled Nozzle Oscillation', Key Engineering Materials, vol. 291-292, pp. 453 - 458
2005
Wang J; Chattopadhyay G; Hargreaves DJ, 2004, 'Development of a Postgraduate engineering management program for the Asia-Pacific region', IEEE International Engineering Management Conference, vol. 2, pp. 856 - 859
2004
Wang J; Liu H; Huang CZ, 2004, 'Modelling the depth of jet penetration in abrasive waterjet contouring of alumina ceramics', Materials Science Forum, vol. 471-472, pp. 462 - 468, http://www.scopus.com/inward/record.url?eid=2-s2.0-17044403908&partnerID=40&md5=5b7ef4a77832f9ba04cbe2d8ed078183
2004
Liu H; Wang J; Kelson N; Brown RJ, 2004, 'A study of abrasive waterjet characteristics by CFD simulation', Journal of Materials Processing Technology, vol. 153-154, pp. 488 - 493, http://dx.doi.org/10.1016/j.jmatprotec.2004.04.037
2004
Chuanzhen H; Jing S; Wang J; Hanlian L; Bin Z; Xing A, 2004, 'Simulation Design for the Composition of Zirconia Composite Ceramic Tool', Journal of Materials Engineering and Performance, vol. 13, pp. 167 - 171, http://dx.doi.org/10.1361/10599490418370
2004
Wang XY; Wang J, 2004, 'Experimental study of laser machining non-planar sheet with variable process parameters', Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology, vol. 44, pp. 518 - 522, http://www.scopus.com/inward/record.url?eid=2-s2.0-5144222077&partnerID=40&md5=99240fe841df62d842f26f415222dafd
2004
Wang J, 2004, 'Techniques for Enhancing the Cutting Performance of Abrasive Waterjets', Key Engineering Materials, vol. 257-258, pp. 521 - 526, http://www.scopus.com/inward/record.url?eid=2-s2.0-0842348225&partnerID=40&md5=5b96d39937df40ffb8c8ad58992e876b
2004
Wang J; Wei XP; Christodoulou P; Hermanto H, 2004, 'Rapid tooling for zinc spin casting using arc metal spray technology', Journal of Materials Processing Technology, vol. 146, pp. 283 - 288, http://dx.doi.org/10.1016/j.jmatprotec.2003.11.014
2004
Liu HL; Huang CZ; Wang J; Sun J, 2004, 'Microstructure and mechanical properties of two kinds of Al 2O3/SiC nanocomposites', Materials Science Forum, vol. 471-472, pp. 243 - 247, http://www.scopus.com/inward/record.url?eid=2-s2.0-17044408839&partnerID=40&md5=2a1b364632f7a8fb50faba2e8e12308a
2004
Huang CZ; He L; Wang J; Liu HL, 2004, 'A study on the microstructure of Ti(C,N) matrix cermet tool material', Materials Science Forum, vol. 471-472, pp. 67 - 71, http://www.scopus.com/inward/record.url?eid=2-s2.0-17044429088&partnerID=40&md5=9c0e80e6d3be2ead019212f9f4a59123
2004
Wang J; Huang CZ; Song WG, 2003, 'The effect of tool flank wear on the orthogonal cutting process and its practical implications', Journal of Materials Processing Technology, vol. 142, pp. 338 - 346, http://dx.doi.org/10.1016/S0924-0136(03)00604-6
2003
Wang J; Kuriyagawa T; Huang CZ, 2003, 'An experimental study to enhance the cutting performance in abrasive waterjet machining', MACHINING SCIENCE AND TECHNOLOGY, vol. 7, pp. 191 - 207, http://dx.doi.org/10.1081/MST.120022777
2003
Wang J; Zhang J; Wei X, 2003, 'Development of optimization strategies and CAM software for single pass end-milling operation', Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 39, pp. 141 - 146, http://dx.doi.org/10.3901/JME.2003.10.141
2003
Wang J; Kuriyagawa T; Huang CZ, 2003, 'An experimental study to enhance the cutting performance in abrasive waterjet machining', Machining Science and Technology, vol. 7, pp. 191 - 207, http://dx.doi.org/10.1081/MST-120022777
2003
Wang J; Guo DM, 2003, 'The cutting performance in multipass abrasive waterjet machining of industrial ceramics', Journal of Materials Processing Technology, vol. 133, pp. 371 - 377, http://dx.doi.org/10.1016/S0924-0136(02)01125-1
2003
Wang J; Zhong S; Konstantinov K; Ahn JH; Liu HK; Dou SX, 2003, 'Synthesis Nanocrystalline α-PbO and β-PbO Lead Oxides for Lead-Acid Battery', Journal of Metastable and Nanocrystalline Materials, vol. 15-16, pp. 367 - 372, http://dx.doi.org/10.4028/www.scientific.net/jmnm.15-16.367
2003
Wang J, 2003, 'The effects of the jet impact angle on the cutting performance in AWJ machining of alumina ceramics', Key Engineering Materials, vol. 238-239, pp. 117 - 122, http://www.scopus.com/inward/record.url?eid=2-s2.0-0037284982&partnerID=40&md5=7e92124fb50a59682d662b8dca13f371
2003
Wu Y; Fan Y; Kato M; Wang J; Syoji K; Kuriyagawa T, 2003, 'A new centerless grinding technique without employing a regulating wheel', Key Engineering Materials, vol. 238-239, pp. 355 - 360, http://www.scopus.com/inward/record.url?eid=2-s2.0-0037282394&partnerID=40&md5=8221ce088c4eee048bae49f5625b7c72
2003
Chen FL; Wang J; Lemma E; Siores E, 2003, 'Striation formation mechanisms on the jet cutting surface', Journal of Materials Processing Technology, vol. 141, pp. 213 - 218, http://dx.doi.org/10.1016/S0924-0136(02)01120-2
2003
Wang J; Liu H, 2002, 'Analysis of the cutting performance in contouring using an abrasive waterjet', Chinese Journal of Mechanical Engineering (English Edition), vol. 15, pp. 73 - 78, http://www.scopus.com/inward/record.url?eid=2-s2.0-0036990095&partnerID=40&md5=d28269e4b5798964650ed0e7029dc225
2002
Wang J; Kuriyagawa T; Wei XP; Guo DM, 2002, 'Optimization of cutting conditions for single pass turning operations using a deterministic approach', International Journal of Machine Tools and Manufacture, vol. 42, pp. 1023 - 1033, http://dx.doi.org/10.1016/S0890-6955(02)00037-8
2002
Lemma E; Chen L; Siores E; Wang J, 2002, 'Optimising the AWJ cutting process of ductile materials using nozzle oscillation technique', International Journal of Machine Tools and Manufacture, vol. 42, pp. 781 - 789, http://dx.doi.org/10.1016/S0890-6955(02)00017-2
2002
Gudimetla P; Wang J; Wong W, 2002, 'Kerf formation analysis in the abrasive waterjet cutting of industrial ceramics', Journal of Materials Processing Technology, vol. 128, pp. 123 - 129, http://dx.doi.org/10.1016/S0924-0136(02)00437-5
2002
Liu H; Wang J; Brown RJ; Kelson N, 2002, 'Computational fluid dynamics (CFD) simulation of ultrahigh velocity abrasive waterjet', Key Engineering Materials, vol. 233-236, pp. 477 - 482, http://www.scopus.com/inward/record.url?eid=2-s2.0-0036944621&partnerID=40&md5=5a2071ba6490b9d548b24c7daa884102
2002
Page JR; Wang J, 2002, 'Prediction of shear force using 3D non-linear FEM analyses for a plain weave carbon fabric in a bias extension state', Finite Elements in Analysis and Design, vol. 38, pp. 755 - 764, http://dx.doi.org/10.1016/S0168-874X(01)00104-4
2002
Wang J; Guo DM, 2002, 'A predictive depth of penetration model for abrasive waterjet cutting of polymer matrix composites', Journal of Materials Processing Technology, vol. 121, pp. 390 - 394, http://dx.doi.org/10.1016/S0924-0136(01)01246-8
2002
Lemma E; Chen L; Siores E; Wang J, 2002, 'Study of cutting fiber-reinforced composites by using abrasive water-jet with cutting head oscillation', Composite Structures, vol. 57, pp. 297 - 303, http://dx.doi.org/10.1016/S0263-8223(02)00097-1
2002
Huang C; Jun W; Sun J; He L; Zou B; Fang B; Li Z; Ai X, 2002, 'A study on the wear resistance of ZrO2/Al2O3 ceramic scissors for spinning and weaving', Journal of Materials Engineering and Performance, vol. 11, pp. 610 - 613, http://dx.doi.org/10.1361/105994902770343584
2002
Huang C; Wang J; Sun J; He L; Zou B; Fang B; Li Z; Ai X, 2002, 'A study on the wear resistance of ZrO2/Al2O3 ceramic scissors for spinning and weaving', Journal of Materials Engineering and Performance, vol. 11, pp. 610 - 613, http://www.scopus.com/inward/record.url?eid=2-s2.0-0036959793&partnerID=40&md5=eb92819e63a75435157093d6976eb27c
2002
Wang J, 2001, 'Development of a chip flow model for turning operations', International Journal of Machine Tools and Manufacture, vol. 41, pp. 1265 - 1274, http://dx.doi.org/10.1016/S0890-6955(01)00022-0
2001
Wang J; Armarego EJA, 2001, 'Computer-aided optimization of multiple constraint single pass face milling operations', Machining Science and Technology, vol. 5, pp. 77 - 99, http://dx.doi.org/10.1081/MST-100103179
2001
Huang CZ; Wang J; Li ZQ; Wang BY; Ai X, 2001, 'The preparation of super-fine alumina powders with sol-gel technology', Key Engineering Materials, pp. 127 - 132, http://www.scopus.com/inward/record.url?eid=2-s2.0-0034972462&partnerID=40&md5=076af95e97e5ab28e3fcf8e5905039fd
2001
Wang J, 2000, 'Experimental analysis and optimization of the CO2 laser cutting process for metallic coated sheet steels', International Journal of Advanced Manufacturing Technology, vol. 16, pp. 334 - 340, http://dx.doi.org/10.1007/s001700050165
2000
Huang CZ; Wang J; Ai X, 2000, 'Development of new ceramic cutting tools with alumina coated carbide powders', International Journal of Machine Tools and Manufacture, vol. 40, pp. 823 - 832, http://dx.doi.org/10.1016/S0890-6955(99)00102-9
2000
Wang J, 2000, 'Effect of the multi-layer surface coating of carbide inserts on the cutting forces in turning operations', Journal of Materials Processing Technology, vol. 97, pp. 114 - 119, http://dx.doi.org/10.1016/S0924-0136(99)00353-2
2000
Wang J, 1999, 'Abrasive waterjet machining of polymer matrix composites - cutting performance, erosive process and predictive models', International Journal of Advanced Manufacturing Technology, vol. 15, pp. 757 - 768, http://dx.doi.org/10.1007/s001700050129
1999
Wang J, 1999, 'Machinability study of polymer matrix composites using abrasive waterjet cutting technology', Journal of Materials Processing Technology, vol. 94, pp. 30 - 35, http://dx.doi.org/10.1016/S0924-0136(98)00443-9
1999
Wang J; Wong WCK, 1999, 'CO2 laser cutting of metallic coated sheet steels', Journal of Materials Processing Technology, vol. 95, pp. 164 - 168, http://dx.doi.org/10.1016/S0924-0136(99)00276-9
1999
Wang J; Paton R; Page JR, 1999, 'The draping of woven fabric preforms and prepregs for production of polymer composite components', Composites Part A - Applied Science and Manufacturing, vol. 30, pp. 757 - 765, http://dx.doi.org/10.1016/S1359-835X(98)00187-0
1999
Wang J; Wong WCK, 1999, 'CO2 laser cutting of metallic coated sheet steels', Journal of Materials Processing Technology, vol. 95, pp. 164 - 168, http://dx.doi.org/10.1016/S0924-0136(99)00276-9
1999
Wang J; Wong WCK, 1999, 'A study of abrasive waterjet cutting of metallic coated sheet steels', International Journal of Machine Tools and Manufacture, vol. 39, pp. 855 - 870, http://dx.doi.org/10.1016/S0890-6955(98)00078-9
1999
Wang J, 1998, 'Computer-aided economic optimization of end-milling operations', International Journal of Production Economics, vol. 54, pp. 307 - 320, http://dx.doi.org/10.1016/S0925-5273(98)00008-5
1998
Wang J; Page JR; Paton R, 1998, 'Experimental investigation of the draping properties of reinforcement fabrics', Composites Science and Technology, vol. 58, pp. 229 - 237, http://dx.doi.org/10.1016/S0266-3538(97)00115-2
1998
Wang J, 1998, 'Development of drilling optimization strategies for CAM applications', Journal of Materials Processing Technology, vol. 84, pp. 181 - 188, http://dx.doi.org/10.1016/S0924-0136(98)00095-8
1998
Armarego EJA; Smith AJR; Wang J, 1994, 'Computer-Aided Constrained Optimization Analyses and Strategies for Multipass Helical Tooth Milling Operations', CIRP Annals - Manufacturing Technology, vol. 43, pp. 437 - 442, http://dx.doi.org/10.1016/S0007-8506(07)62248-3
1994
Armarego EJA; Smith AJR; Wang J, 1993, 'Constrained optimization strategies and CAM software for single-pass peripheral milling', International Journal of Production Research, vol. 31, pp. 2139 - 2160, http://dx.doi.org/10.1080/00207549308956849
1993
Wang J; Li L; Feng Y; Yao H; Wang X, 1993, 'Permanent hepatic artery embolization with dextran microspheres in 131 patients with unresectable hepatocellular carcinoma', Chinese Medical Journal, vol. 106, pp. 441 - 445
1993
Conference Papers
add
Wang Z; Huang C; Wang J; Zou B; Abbas CA; Wang X, 2020, 'Design and Characterization of Hydroxyapatite Scaffolds Fabricated by Stereolithography for Bone Tissue Engineering Application', in Procedia CIRP, pp. 170 - 175, http://dx.doi.org/10.1016/j.procir.2020.05.138
2020
Chen Y; Wang J, 2019, 'Improvement of the surface tribological property of cutting tools through femtosecond laser surface texturing', in International Advancement in Ultraprocision Machining Process, Maebashi, Japan, presented at the 15th China-Japan International Conference on Ultra-Precision Machining Processes (CJUMP2019), Maebashi, Japan, 26 September 2019 - 28 September 2019
2019
Su R; Huang C; Zou B; Xu L; Wang J; Li C, 2018, 'Cutting tool failure and reliability analysis during milling of compacted graphite iron by cemented carbide tool', in Wang J; Liu D; Nguyen T (eds.), Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 90 - 99, presented at the 13th Asia-Pacific Conference on Materials processing, Sydney, 23 August 2018 - 27 August 2018
2018
Yao P; Zhu H; Huang C; Wang J; Zhang P, 2018, 'Experimental investigation on micro-milling of maraging steel 3J33B of different heat treatment conditions', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 107 - 116, presented at The 13th Asia-Pacific Conference on Materials processing, Sydney, 23 August 2018 - 27 August 2018
2018
Hui Q; Huang CZ; Wang J; Liu H; Liu Z; Zhang R, 2018, 'A study on laser-assisted waterjet micromachining of single crystal silicon carbide by full factor experiment', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 329 - 338, presented at The 13th Asia-Pacific Conference on Materials processing, Sydney, 23 August 2018 - 27 August 2018
2018
Wang Z; Huang CZ; Wang J; Zou B; Abbas CA, 2018, '3D printing hydroxyapatite scaffold based on variable porosity for bone tissue engineering application', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 428 - 437, presented at The 13th Asia-Pacific Conference on Materials processing, Sydney, 23 August 2018 - 27 August 2018
2018
Zhang P; Huang CZ; Zhu H; Wang J; Yao Y; Yao P; Peng Y, 2018, 'Relationships between the elastic recovery ratio and the load on two different alloys in indentation experiments', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 517 - 524, presented at The 13th Asia-Pacific Conference on Materials processing, Sydney, 23 August 2018 - 27 August 2018
2018
Zhang Z; Wang C; Yao P; Wang J; Huang C; Zhang K; Liu Y, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
2018
Zhang R; Huang CZ; Wang J; Zhu H; Zou B; Liu H; Liu Y; Liu Y, 2018, 'Influence of auxiliary gas on silicon carbide machining by femtosecond laser', in Proceedings of the 21st International Symposium on Advances in Abrasive Technology (ISAAT2018), Toronto, presented at The 21st International Symposium on Advances in Abrasive Technology (ISAAT2018),, Toronto, 14 October 2018 - 17 October 2018, http://icat-isaat.org/static/ISAAT-2018/Chapter%2007%20Non-conventional%20machining%20processes/73%20Influence%20of%20auxiliary%20gas%20on%20silicon%20carbide%20machining%20by%20femtosecond%20laser.pdf
2018
Zhang R; Huang C; Wang J; Zhu H; Zou B; Liu H; Liu Y; Liu Y, 2018, 'Influence of auxiliary gas on silicon carbide machining by femtosecond laser', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
2018
Zhang Z; Wang C; Yao P; Wang J; Huang C; Zhang K; Liu Y, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
2018
Yao P; Zhang Z; Meng H; Huang C; Wang J; Zhu H, 2017, 'Prediction of surface roughness in precision quick point grinding of steel-based metal matrix composites', in Chen M (ed.), Proceedings of the 13th China-Japan International Conference on Ultra-precision Machining Process (CJUMP2017), The 13th China-Japan International Conference on Ultra-precision Machining Process (CJUMP2017), Shanghai, China, pp. 209 - 215, presented at The 13th China-Japan International Conference on Ultra-precision Machining Process (CJUMP2017), Shanghai, China, 19 November 2017 - 21 November 2017
2017
Zhang Y; Li C; Yang M; Jia D; Wang J; Bing S; Ji J, 2017, 'Physical properties of vegetable oils on the grinding performance and mechanisms in nano-particle jet MQL grinding of nickel based alloys', in Zhang F (ed.), Proceedings of the19th Conference on Abrasive Technology, The19th Conference on Abrasive Technology, Harbin, China, pp. 1 - 5, presented at The19th Conference on Abrasive Technology, Harbin, China, 04 August 2017 - 06 August 2017
2017
Thongkaew K; Wang J, 2017, 'An experimental study of the particle velocities in abrasive waterjets', in ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology, pp. 578 - 585
2017
Adam SA; Wang J; Li HZ, 2016, 'An experimental study of the radial-mode abrasive waterjet turning of alumina ceramics', in Proceedings of the 16th International Symposium on Advances in Abrasive Technology, KTH Royal Institute of Technology, Swden, Stockholm, Sweden, pp. 155 - 160, presented at The 16th International Symposium on Advances in Abrasive Technology, Stockholm, Sweden, 02 October 2016 - 05 October 2016
2016
Ji W; Zou B; Huang C; Wang J, 2016, 'Microstructure and formation process of gradient structure of self-diffusion composite tool materials', in International Journal of Nanomanufacturing, pp. 55 - 63, http://dx.doi.org/10.1504/IJNM.2016.076157
2016
Thongkaew K; Wang JUN; Yeoh G, 2015, 'An Investigation of Hole Machining Process on a Carbon-fiber Reinforced Plastic Sheet by Abrasive Waterjet', in ISAAT (ed.), An Investigation of Hole Machining Process on a Carbon-fiber Reinforced Plastic Sheet by Abrasive Waterjet, Trans Tech Publications, Jeju Island, Korea, pp. 113 - 118, presented at The 18th International Symposium on Advance in Abrasive Technology, Jeju Island, Korea, 04 October 2015 - 07 October 2015, http://dx.doi.org/10.4028/www.scientific.net/AMR.806.113
2015
Ji W; Zou B; Huang C; Wang J, 2015, 'The microstructure and formation process of gradient structure of self-diffusion gradient composite cutting tool materials', in Proc of the 16th International Manufacturing Conference in China (IMCC2015), Editorial Office of Chinese Journal of Mechanical Engineering, Hangzhou, China, pp. 1278 - 1284, presented at The 16th International Manufacturing Conference in China (IMCC2015), Hangzhou, China, 22 October 2015 - 25 October 2015
2015
Hou R; Huang C; Zhu H; Yao P; Wang J, 2015, 'A study of the interaction between abrasive waterjet and target by CFD and FEM method', in Proc of the 16th International Manufacturing Conference in China, The 16th International Manufacturing Conference in China, Hangzhou, China, pp. 19 - 24, presented at The 16th International Manufacturing Conference in China, Hangzhou, China, 22 October 2015 - 25 October 2015
2015
Nguyen T; Wang J; Kwok N; Li H, 2015, 'Predictive models for the geometrical characteristics of channels milled by abrasive waterjet', in Proc. of 2015 IEEE International Conference on Automation Science and Engineering, IEEE, Gothenburg, Sweden, pp. 1459 - 1464, presented at 2015 IEEE International Conference on Automation Science and Engineering (CASE), Gothenburg, Sweden, 24 August 2015 - 28 August 2015, http://dx.doi.org/10.1109/CoASE.2015.7294305
2015
Dai J; Li H; Wang J, 2014, 'Micro-milling of Ti6Al4V: An Investigation on the Cutting Forces and Surface Integrity', in Brinksmeier E (ed.), Proceedings of the 4th International Conference on Nanomanufacturing (nanoMan2014), 4th International Conference on Nanomanufacturing, Breman, Germany, pp. E1-5, presented at 4th International Conference on Nanomanufacturing, Breman, Germany, 08 July 2014 - 10 July 2014
2014
Wang W; Yao P; Li C; Huang C; Wang J; Zhu H; Liu Z, 2014, 'Dressing of Diamond Grinding Wheels by Abrasive Water Jet for Freeform Optical Surface Grinding', in Yang L; Ruch E; Li S (eds.), Proceedings of SPIE - The International Society for Optical Engineering, Society of Photo-optical Instrumentation Engineers, Harbin, China, pp. 928108-1 - 928108-8, presented at 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies, Harbin, China, 26 April 2014 - 29 April 2014, http://dx.doi.org/10.1117/12.2068566
2014
Yao P; Wei W; Huang CZ; Wang J; Zhu HT; Zhang ZY, 2014, 'High efficiency abrasive waterjet dressing of diamond grinding wheel', in Advanced Materials Research, pp. 243 - 248, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.243
2014
Zhao C; Wang J, 2013, 'The Performance Evaluation and Application of Recycled Concrete in Constructions', in Zhang X; Zhang B; Jiang L; Xie M (eds.), CIVIL, STRUCTURAL AND ENVIRONMENTAL ENGINEERING, PTS 1-4, TRANS TECH PUBLICATIONS LTD, Shenzhen, PEOPLES R CHINA, pp. 127 - +, presented at 2nd Global Conference on Civil, Structural and Environmental Engineering (GCCSEE 2013), Shenzhen, PEOPLES R CHINA, 28 September 2013 - 29 September 2013, http://dx.doi.org/10.4028/www.scientific.net/AMR.838-841.127
2013
Wang XY; Kang RK; Xu WJ; Guo DM; Wang J, 2010, 'Laser cleaning of fine particles on si-wafers', in AIP Conference Proceedings, International Conference on Advances in Materials and Processing Technologies (AMPT2010), Paris; France, pp. 1588 - 1593, presented at International Conference on Advances in Materials and Processing Technologies (AMPT2010), Paris; France, 24 October 2010 - 27 October 2010, http://dx.doi.org/10.1063/1.3552416
2010
Wang X; Xu W; Wang L; Wang J, 2009, 'Heat absorbing model in laser drilling of hard-alloy sheet', in Proceedings of the 12th CIRP Conference on Modelling of Machining Operations - Volume 1, Mondragon University, Arrasate-Mondragon, Spain, presented at 12th Modelling of Machining Operations, San Sebastian Basque Country, Spain, 07 May 2009 - 08 May 2009
2009
Wang J, 2009, 'Predictive cutting force and torque models for the plane rake faced drill point design', in Proceedings of the 12th CIRP Conference on Modelling of Machining Operations - Volume 1, Mondragon University, Arrasate-Mondragon, Spain, presented at 12th Modelling of Machining Operations, San Sebastian Basque Country, Spain, 07 May 2009 - 08 May 2009
2009
Zhang Q; Wang J, 2008, 'A plane rake faced drill point design for high drilling performance.', in Proceeding of the 8th International conference on Frontiers of Design and Manufacturing, 8th International Conference on Frontiers of Design and Manufacturing, Tianjin, China, presented at 8th International Conference on Frontiers of Design and Manufacturing, Tianjin, China, 23 September 2008 - 26 September 2008
2008
Fan J; Wang C; Wang J, 2008, 'Modeling the erosion rate in micro abrasive air jet machining of glasses', in Proceeding of the 8th International conference on Frontiers of Design and Manufacturing, 8th International conference on Frontiers of Design and Manufacturing, Tianjin, China, presented at 8th International conference on Frontiers of Design and Manufacturing, Tianjin, China, 23 September 2008 - 26 September 2008
2008
Wang J; Liu H, 2008, 'Particle velocity models for ultra-high pressure abrasive waterjets', in Proceedings of the Eighth Asia-Pacific Conference on Materials Processing, Materials Processing, Guilin-Guangzhou, China, presented at Materials Processing, Guilin-Guangzhou, China, 15 June 2008 - 20 June 2008
2008
Huang C; Hou RG; Wang J; Zhu HT; Feng YX, 2007, 'Two dimensional simulation for gas-solid-liquid three-phase flow of abrasive water jet nozzle and experimental validation.', in Precision Grinding and Abrasive Technology, Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, presented at Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, 26 September 2007 - 28 September 2007
2007
Wang J, 2007, 'A new predictive model for the depth of cut in abrasive waterjet contouring of alumina ceramics', in Precision Grinding and Abrasive Technology, Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, presented at Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, 26 September 2007 - 28 September 2007
2007
Zhu HT; Huang CZ; Wang J; Lu XY; Feng YX, 2006, 'Machinability of glass by abrasive waterjet', in Gao H; Wang J; Jin Z; Guo DM (eds.), ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, FRONTIERS DESIGN MANUFACTURING, Dalian, PEOPLES R CHINA, pp. 713 - +, presented at International Conference on Surface Finishing Technology and Surface Engineering (ICSFT2006), Dalian, PEOPLES R CHINA, 25 September 2006 - 27 September 2006, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000246140100116&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2006
Huang C; Liu H; Wang J; Sun C, 2006, 'Study on multi-scale and multi-phase nanocomposite ceramic tools and cutting performance', in Advanced Design and Manufacturing for Sustainable Development, Advanced Design and Manufacturing for Sustainable Development, Guangzhou, China, presented at Advanced Design and Manufacturing for Sustainable Development, Guangzhou, China, 19 June 2006 - 22 June 2006
2006
Gu M; Huang CZ; Wang J; Liu B; Liu H, 2006, 'Microstructure and mechanical properties of TiB2, matrix ceramic tool materials by low temperature sintering technology', in Advances in Manufacturing Engineering, Advances in Manufacturing Engineering, Xi`an, China, presented at Advances in Manufacturing Engineering, Xi`an, China, 21 September 2006 - 23 September 2006
2006
Feng Y; Huang C; Wang J; Zhu H; Hou R, 2006, 'A study on surface quality of Al2O3 ceramics milled with abrasive waterjet technology', in Advances in Manufacturing Engineering, Advances in Manufacturing Engineering, Xi`an, China, presented at Advances in Manufacturing Engineering, Xi`an, China, 21 September 2006 - 23 September 2006
2006
Zhu H; Huang C; Wang J; Feng Y; Hou R, 2006, 'Abrasive waterjet machining mechanisms of brittle materials considering material microstructure flaws', in Advances in Manufacturing Engineering, Advances in Manufacturing Engineering, Xi`an, China, presented at Advances in Manufacturing Engineering, Xi`an, China, 21 September 2006 - 23 September 2006
2006
Li F; Wang J; Liu Y; Wan HQ; Wang Q; Ji F, 2006, 'A study of the process of vibration-erosion for adorning polishing', in Gao H; Wang J; Jin Z; Guo DM (eds.), Advances in Abrasive Machining and Surfacing Technologies, FRONTIERS DESIGN MANUFACTURING, Dalian, China, pp. 257 - +, presented at Advances in Abrasive Machining and Surfacing Technologies, Dalian, China, 25 September 2006 - 27 September 2006, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000246140100042&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a
2006
Huang CZ; Wang J; Liu HL; Liu ZW, 2006, 'Study on mechanical properties of multi-scale and multi-phase nanocomposite ceramic tool materials', in Proceedings of the International Conference on Manufacturing Science and Engineering, http://www.scopus.com/inward/record.url?eid=2-s2.0-33751262622&partnerID=40&md5=5a99508bf904255615d4ac7f2c3f0c70
2006
Wang XY; Wang J; Xu WJ; Wu DJ; Lei MK, 2006, 'A study of laser surface modification for GCr 15 steel', in Gao H; Wang J; Jin Z; Guo DM (eds.), ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, FRONTIERS DESIGN MANUFACTURING, Dalian, PEOPLES R CHINA, pp. 615 - +, presented at International Conference on Surface Finishing Technology and Surface Engineering (ICSFT2006), Dalian, PEOPLES R CHINA, 25 September 2006 - 27 September 2006, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000246140100101&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2006
Hou RG; Huang C; Wang J; Lu XY; Zhu HT, 2006, 'Simulation for the outside velocityfield of abrasive water jet nozzle with different geometry', in Current Development in Abrasive Technology, Dalian, China, pp. 243 - 247, presented at Current Development in Abrasive Technology, Dalian, China, 26 September 2006 - 29 September 2006
2006
Wang J; Chattopadhyay G; Hargreaves DJ, 2004, 'Development of a Postgraduate engineering management program for the Asia-Pacific region', in IEEE International Engineering Management Conference, pp. 856 - 859, http://www.scopus.com/inward/record.url?eid=2-s2.0-17644398481&partnerID=40&md5=76dfd628a2d07a3aaf4f906e5c3da717
2004
Wang JW; Zhang JM; Wei XP; Wang J, 2004, 'Collaborative evaluation of engineering design concepts on the web', in CSCWD 2004 - 8th International Conference on Computer Supported Cooperative Work in Design - Proceedings, pp. 224 - 229, http://www.scopus.com/inward/record.url?eid=2-s2.0-15544376774&partnerID=40&md5=ea07ecaca1494b20666f090c4253c59f
2004
Chen FL; Lemma E; Siores E; Wang J, 2003, 'Surface roughness and striation patterns vary with controlled vibration of the abrasive waterjet cutting nozzle', in Mechanics and Material Engineering for Science and Experiments, pp. 342 - 346, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141963394&partnerID=40&md5=708f82ce298250e8a37b7d8b0a74e9d4
2003
Zhang JM; Wei XP; Wang J, 2003, 'Evaluating design concepts by ranking fuzzy numbers', in International Conference on Machine Learning and Cybernetics, pp. 2596 - 2600, http://www.scopus.com/inward/record.url?eid=2-s2.0-1542345430&partnerID=40&md5=af521fad7d6a13a318287962741b55a0
2003
Wang J, 2002, 'Enhancing the capability and performance of abrasive waterjet cutting technology by multipass operations', in Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing (ICFDM'2002), pp. 270 - 278, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141428749&partnerID=40&md5=3ff0f55c1902a89f5dc78ec7df28f9b3
2002
Konstantinov K; Wang J; Bewlay S; Wang GX; Liu HK; Dou SX; Ahn JH, 2002, 'Spray pyrolysis technique for fabrication of nano-sized spherical agglomerated oxide powders for batteries', in Ahn JH; Hahn YD (ed.), METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, TRANS TECH PUBLICATIONS LTD, SEOUL, SOUTH KOREA, pp. 325 - 330, presented at 9th International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials (ISMANAM-2002), SEOUL, SOUTH KOREA, 08 September 2002 - 12 September 2002, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000183202400054&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2002
Wang J, 2002, 'Rapid development of spin cast zinc parts using rapid tooling technologies', in Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing (ICFDM'2002), pp. 355 - 359, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141540389&partnerID=40&md5=ad524a963cdc5f2ce83511161a07ae9c
2002
Chu ZY; Wang YD; Feng CX; Song YC; Wang J; Xiao JY; Li XD, 2001, 'Effect of spinning techniques on the mechanical properties of polymer-derived silicon carbide fiber', in Gong J; Pan W (ed.), HIGH-PERFORMANCE CERAMICS 2001, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, KUNMING, PEOPLES R CHINA, pp. 651 - 656, presented at 2nd China International Conference on High-Performance Ceramics (CICC-2), KUNMING, PEOPLES R CHINA, 11 November 2001 - 15 November 2001, http://dx.doi.org/10.4028/www.scientific.net/KEM.224-226.651
2001
Wang J; Li F; Wei X, 2000, 'Optimization strategy and CAM software for single pass turning operations', in Chen DC; Narutaki N; Yamane Y; Chen W; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, AVIATION INDUSTRY PRESS, BEIJING, PEOPLES R CHINA, pp. 423 - 430, presented at 5th International Conference on Progress of Machining Technology (ICPMT 2000), BEIJING, PEOPLES R CHINA, 16 September 2000 - 20 September 2000, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000166933200079&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2000
Wang J, 2000, 'Improving the cutting performance in abrasive waterjet machining of layered composites', in Chen DC; Narutaki N; Yamane Y; Chen W; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, AVIATION INDUSTRY PRESS, BEIJING, PEOPLES R CHINA, pp. 417 - 422, presented at 5th International Conference on Progress of Machining Technology (ICPMT 2000), BEIJING, PEOPLES R CHINA, 16 September 2000 - 20 September 2000, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000166933200078&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2000
Wang J, 1999, 'A mechanics of cutting analysis in orthogonal machining with tool flank wear', in Wang J; Scott W; Zhang LC (eds.), ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, WORLD SCIENTIFIC PUBL CO PTE LTD, BRISBANE, AUSTRALIA, pp. 357 - 367, presented at 3rd International Conference on Abrasive Technology, BRISBANE, AUSTRALIA, 22 November 1999 - 24 November 1999, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000088778300049&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
1999
Huang CZ; Wang J; Ai X, 1999, 'Stochastic fracture characteristics of advanced ceramic cutting tools', in Wang J; Scott W; Zhang LC (eds.), ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, WORLD SCIENTIFIC PUBL CO PTE LTD, BRISBANE, AUSTRALIA, pp. 350 - 356, presented at 3rd International Conference on Abrasive Technology, BRISBANE, AUSTRALIA, 22 November 1999 - 24 November 1999, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000088778300048&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
1999
Page JR; Wang J, 1999, 'Prediction of shear force and an analysis of yarn slippage for a plain weave carbon fabric in a bias extension state', in IAC 99, Adelaide, Sth Aust, pp. 977 - 986, presented at IAC 99, Adelaide, Sth Aust, 13 September 1999 - 15 September 1999, http://dx.doi.org/10.1016/S0266-3538(99)00198-0
1999
Book Chapters
add
Yamaguchi H; Williams R; Wang J; Shih A; Altena H; Lei S; Kuriyagawa T; Umehara N, 2020, 'Subtractive Processes — Non-Traditional Operations', in Huang Y; Wang L; Liang SY (ed.), Handbook of Manufacturing, World Scientific Publishing Co. Pte. Ltd, Singapore, pp. 95 - 190, http://dx.doi.org/10.1142/9789813271029_0003
2020
Ali Y; Wang J, 2010, 'Impact Abrasive Machining', in Jackson MJ; Davim JP (ed.), Machining with Abrasives, Springer, NY Dordrecht Heidelberg London, pp. 385 - 419, http://dx.doi.org/10.1007/978-1-4419-7302-3_9
2010
Feng YX; Huang CZ; Wang J; Hou RG; Lu XY, 2007, 'An Experimental Study on Milling Al2O3 Ceramics with Abrasive Waterjet', in Progress of Precision Engineering and Nano Technology, Trans Tech Publications Ltd., pp. 500 - 504, http://dx.doi.org/10.4028/0-87849-430-8.500
2007
Hou RG; Huang CZ; Wang J; Lu XY; Feng YX, 2007, 'Simulation of Solid-Liquid Two-Phase Flow Inside and Outside the Abrasive Water Jet Nozzle', in Progress of Precision Engineering and Nano Technology, Trans Tech Publications Ltd., pp. 453 - 457, http://dx.doi.org/10.4028/0-87849-430-8.453
2007
Wang X; Wang J, 2006, 'Abrasive Water Jet Machining', in Wang Y (ed.), China Materials Engineering Canon, Chapter 4 in Volume 25/Part 5 Materials High-Energy Beam Machining Technologies, edn. Original, Chemical Industry Press, Beijing, pp. 125 - 145
2006
Wang J, 2003, 'Economic optimization of machining operations in computer-aided manufacturing systems', in Leondes CT (ed.), Major Reference Work on Computer Aided and Integrated Manufacturing Systems - Volume 5 Manufacturing Processes, edn. Original, World Scientific, Singapore, pp. 131 - 160
2003
Edited Books
add
Wang J; Liu D; Nguyen T, (eds.), 2018, Advances in Materials Processing XIII, Proceedings of the 13th Asia-Pacific Conference on Materials Processing
2018
Liu GJ; Wang J, (ed.), 2016, Advances in Material Processing XII, Advances in Material Processing, Trans Tech Publications, Switzerland
2016
Krajnik P; Rashid A; Aoyama H; Xu XP; Wang J, (eds.), 2016, Advances in Abrasive Technology XIX, Advances in Abrasive Technology, Tans Tech Publicaitons, Switzerland
2016
Yuan JL; Chen M; Wang J; Zhou LB; Lv BH, (eds.), 2013, Advances in Abrasive Technology XVI, Trans Tech Publications, Switzerland, http://www.ttp.net/978-3-03785-825-7.html
2013
Huang C; Zhu H; Wang J; Li X, (eds.), 2012, Advances in Materials Processing X, Trans Tech Publications, Switzerland, http://www.scopus.com/inward/record.url?eid=2-s2.0-84860775646&partnerID=40&md5=6ba8cc5286792a8a8bed42dc05525a44
2012
Zhang Y; Buttler DL; Wang J; Li X; Yui A; Zhou L, (eds.), 2012, Advances in Abrasive Technology XV, Trans Tech Publications, Switzerland
2012
Yan Q; Liu J; Wang J; Gao H, (eds.), 2010, Surface Finishing Technology and Surface Engineering II, Trans Tech Publications, http://www.scopus.com/inward/record.url?eid=2-s2.0-78651243712&partnerID=40&md5=eaffcc3a2679d38e0799924083bd4046
2010
Wang J; Mathew P; Li X; Huang C; Zhu H, (eds.), 2010, Advances in Materials Processing IX, Trans Tech Publications, http://www.scopus.com/inward/record.url?eid=2-s2.0-77955457068&partnerID=40&md5=cb97b67b2e534ff963c45b182e16c898
2010
Huang H; Zhang L; Wang J; Jiang Z; Zhou L; Xu X, (eds.), 2009, Advances in Abrasive Technology XII, Trans Tech Publications, Switzerland
2009
Guo D; Wang J; Jia Z; Kang R; Gao H; Wang X, (eds.), 2009, Advances in Materials Manufacturing Science and Technology XIII - Volume 1, Trans Tech Publications Ltd
2009
Guo D; Wang J; Jia Z; Kang R; Gao H; Wang X, (eds.), 2009, Advances in Materials Manufacturing Science and Technology XIII - Volume 2, Trans Tech Publications Ltd
2009
Wang C; Li X; Wang J, (eds.), 2008, Proceedings of the 8th Asia-Pacific Conference on Materials Processing, Frontiers in Design and Manufacturing Publications
2008
Guo D; Kuriyagawa T; Wang J; Tamaki J, (eds.), 2007, Advances in Abrasive Technology IX, Trans Tech Publications
2007
Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing Vol. 2, Frontiers in Design and Manufacturing Publications
2006
Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing, Vol. 1, Frontiers in Design and Manufacturing Publications
2006
Jia Z; Wang X; Guo D; Wang J, (eds.), 2006, Current Development in Abrasive Technology: Proceedings of 9th International Symposium on Advances in Abrasive Technology, Frontiers in Design and Manufacturing Publications
2006
Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing Vol. 3, Frontiers in Design and Manufacturing Publications
2006
Gao H; Wang J; Wang X; Guo D, (eds.), 2006, Advances in Abrasive Machining and Surfacing Technologies: Proceedings of International Conference on Surface Finish Technology and Surface Engineering, Frontiers in Design and Manufacturing Publications
2006
Wang J; Guo D; Wang D; Wang J, (eds.), 2002, Frontiers in Design and Manufacturing: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Vol. 1, ICFDM publication
2002
Guo D; Wang D; Wang J, (eds.), 2002, Frontiers in Design and Manufacturing: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Vol. 2, ICFDM publication
2002
Wang J; Scott W; Zhang L, (eds.), 1999, Abrasive Technology: Current Development and Applications I, World Scientific Publisher, Singapore
1999
Conference Proceedings (Editor of)
add
Wang J; Liu D; Nguyen T, (eds.), 2018, 'Study on surface integrity of the compacted graphite iron machined by high speed milling,', Sydney, presented at The 13th Asia-Pacific Conference on Materials processing, Sydney, 23 August 2018 - 27 August 2018
2018
Wang J; Gao H; Guo D; Jin Z, (eds.), 2016, 'Advanced Surface Finishing Technologies for Engineered Components', Inderscience Enterprises Ltd, Vol. 29, pp. 90 - 265, presented at 2006 International Conference on Surface Finish Technology and Surface Engineering, 24 September 2016 - 25 September 2006
2016
Wei X; Zhang Q; Wang J, (eds.), 2009, 'Advances in Computer Aided Design and Digital Entertainment', Inderscience Enterprises Ltd, Vol. 38, pp. 1 - 235, presented at International Conference on Computer Aided Design and Digital Entertainment, 03 March 2009 - 05 March 2017
2009
Wang J; Gao H; Guo D; Kang R, (eds.), 2008, 'Current develoment in surface engineering and technologies', Inderscience Enterprises Ltd, Taiyuan, Vol. 31, pp. 1 - 1, presented at 2008 International Conference on Surface Finishing Technology & Surface Engineering (ICSFT), Taiyuan, 22 September 2008 - 23 September 2008, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000252336700001&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a
2008
Books
add
2012, Advances in Materials Processing X, Huang CZ; Zhu HT; Wang J; Li X, (eds.), Trans Tech Publicaitons, United Kingdom, http://www.ttp.net/978-3-03785-399-3.html
2012
Wang J, 2003, Abrasive Waterjet Machining of Engineering Materials, Original, Trans Tech Publications, Uetikon-Zuerich, Switzerland
2003

2001       Invitation Fellowship, Australian Academy of Science
2001       First Grade Scientific Advancement Award, Ministry of Education, China
2003       Outstanding Overseas Young Scholar Award, National Natural Science Foundation of China
2004       Outstanding Academic Contribution Award in Research and Scholarship, Queensland University of Technology
2008       Endeavour Executive Award, Department of Education, Science and Training, Australia
2012       Advanced Innovation Award, NewSouth Innovations Pty. Ltd., Australia
2016       President's Award, Ausinan Science and Technology Society, Australia

2016       2015 Thatcher Bros Prize, the Institution of Mechanical Engineers (UK)
2019       Dalian University of Technology Alumnus Outstanding Achievement Award
2019       Lifetime Achievement Award, Ausinan Science and Technology Society
2019       First Grade Technology Invention Award, Ministry of Education, China

Professor Wang has received 22 ARC (Australian Research Council) grants as Chief Investigator (CI), including 9 ARC Discovery-Projects grants as the lead or sole CI and an ARC Large grant, as well as a number of other grants from CRC (collaborative research centre), the Federal Department of Education, universities (including grants and fellowships), local industry, government agencies, and international granting bodies in support of his research.

Manufacturing processes and technologies; micro-machining; micro-fabrication; nano-machining; laser processing; water jet machining; abrasive jet machining.