Rukmi Dutta

Associate Professor

Dr Rukmi Dutta is a senior lecturer in Energy System with the School of Electrical Engineering and Telecommunications. Her research interests include:

  • Electric Machines and Drive Systems
  • Electric and Hybrid Electric vehicles
  • Renewable Energy
  • Wireless power transfer 
  • Electromagnetics 
  • Power Electronics

Areas of research expertise include design and control of novel electric machines such as permanent magnet machines in the automotive and renewable energy sectors. Provided consultancy to several global entrepreneuring companies in USA and Australia. The major research grants that I held are  highlighted  below -

 

 ARC Discovery Project   2017-2019                    $478.5K                                CI1

High-speed interior permanent magnet synchronous machines ( DP170102288)

The key aim is to develop a novel permanent magnet machine for high speed operation (>50,000 rpm). The research will satisfy the demands of emerging high-speed applications for electric drive systems, using permanent magnet machines with simple constructional features, reduced use of costly rare earth materials, inherent sensor-less control capability and flux-weakening. Applications for the research include many global growth sectors including aerospace, automotive, manufacturing, energy generation and storage. A new highquality, multi-physics model will be realised, and guidelines for optimised design discovered. These will be verified with the help of a constructed prototype. The project is undertaken in collaboration with CSIRO and WEMPEC at the University of Wisconsin-Madison, USA. 

 

ARC Discovery Project  2015-2017               $280K                               CI2

Advanced fault tolerant drives for safety critical applications (DP150102368)

The key aim is to develop an electrical drive system with enhanced tolerance to system faults. The research is significant as it will satisfy the demands of emerging high-reliability applications for electric drive systems utilising a patented concentrated-wound permanent magnet machine. Applications for the research include the automotive, aerospace and resource sectors which are global growth sectors. A new high-quality model of the machine will be realised. This new model will then inform the development of suitable control techniques for the machine driven by fault-tolerant inverter topologies. The research will be demonstrated on prototype research machines and the system performance compared with existing state-of-the-art technology.

 

 

ARC Discovery Project  2013-2015                  $380K                               CI2

Dynamic model and mechanical sensorless controller for a novel concentrated-winding interior permanent magnet machine for electric vehicles (DP130103760)

 Fractional-slot, concentrated-wound (FSCW) interior permanent magnet (IPM) machines have demonstrated higher power density and constant power speed range than other PM machines with distributed windings. Extensive current research on the FSCW IPM machine is mainly inspired by its suitability for future electric vehicles. It has been found, that conventional dq model developed based on distributed winding does not adequately represent the dynamics of FSCW machines. Without an accurate model, development of high performance controller for such a machine to utilize its full potential is not possible. This project aims to find an accurate model for an FSCW IPM machine recently developed at UNSW and its sensorless highperformance controller. The project was in collaboration with CSIRO. 

 

ARC Discovery Project  2009- 2011                   $320K                                CI4

Optimum rotor and concentrated stator winding structures for improving the torque, field-weakening and power density characteristics of the interior permanent-magnet machines (DP0988255 )

The Interior Permanent Magnet machine offers one of the highest efficiency and torque/volume ratios of all machines; however, its optimum design is not yet fully developed. In particular, the trade-off between a promising single-barrier (segmented) rotor developed simultaneously at UNSW and Japan (Toyota and
Honda) versus a more conventional multiple-barrier rotor, and between a concentrated versus a distributed stator winding structure need to be fully understood before an optimum design can be found. The project will use innovative analysis, design and optimization techniques developed at three universities where leading research on the above mentioned design options have recently been studied. The project was in collaboration with CSIRO, Adelaid University and University of Wisconsin-Madison, USA. 

 

Australian Power Industry (API) supports Grant  2012                $100K                                CI3

Development of a Micro Generation Test Facility for the Assessment of Power Quality and Hybrid System.


 

publications

Conference Papers
add
Chu G; Lovatt H; Rahman MF; Dutta R, 2020, 'Comparative Analysis of Different Halbach Array Structures in the Design Optimization of an In-wheel Permanent Magnet Machine for Land Speed Racing', in ECCE 2020 - IEEE Energy Conversion Congress and Exposition, pp. 1800 - 1805, http://dx.doi.org/10.1109/ECCE44975.2020.9235827
2020
Zhang R; Zhang D; Dutta R, 2019, 'Study on PCB Based Litz Wire Applications for Air-Core Inductor and Planar Transformer', in 2019 9th International Conference on Power and Energy Systems, ICPES 2019, http://dx.doi.org/10.1109/ICPES47639.2019.9105549
2019
Showvbul Islam Shakib SM; Xiao D; Dutta R; Alam KS; Osman I; Rahman MF; Akter MP, 2019, 'An Analytical Approach to Direct Torque and Flux Control of Interior Permanent Magnet Synchronous Machine for Deep Field Weakening Without Using Pre-calculated Lookup Tables', in ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia, Busan, Korea, pp. 3196 - 3202, presented at ICPE, Busan, Korea, 27 May 2019 - 30 May 2019
2019
Chu G; Pouramin A; Dutta R; Rahman MF; Lovatt H; Sarlioglu B, 2019, 'A new mechanical-strength-oriented rotor parametric model design for the optimization of a very-high-speed IPMSM', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6092 - 6098, http://dx.doi.org/10.1109/ECCE.2019.8912980
2019
Showybul Islam Shakib SM; Xiao D; Dutta R; Alam KS; Osman I; Rahman MF, 2019, 'An improved modulated model predictive torque and flux control for high-speed IPMSM drives', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6601 - 6607, http://dx.doi.org/10.1109/ECCE.2019.8913018
2019
Chu G; Dutta R; Lovatt H; Sarlioglu B; Rahman MF, 2018, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of the Interior Permanent-Magnet Synchronous Machine', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 255 - 261, http://dx.doi.org/10.1109/ECCE.2018.8557418
2018
Chu G; Dutta R; Rahman MF, 2018, 'Investigation of the Stress Concentration Factor for Estimating Maximum Mechanical Stress of Interior Permanent-Magnet Machines', in Proceedings - 2018 23rd International Conference on Electrical Machines, ICEM 2018, pp. 798 - 804, http://dx.doi.org/10.1109/ICELMACH.2018.8507225
2018
Zhang R; Zhang D; Dutta R, 2018, 'Study on core loss reduction in the transformer of isolated DC/DC converter with series L-C and resonant L-C shunt filter', in Australasian Universities Power Engineering Conference, AUPEC 2018, http://dx.doi.org/10.1109/AUPEC.2018.8757908
2018
Pouramin A; Dutta R; Rahman MF, 2018, 'Design Optimization of a Spoke-Type FSCW IPM Machine to Achieve Low Torque Ripple and High Torque Density under a Wide Constant Power Speed Range', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 6914 - 6921, http://dx.doi.org/10.1109/ECCE.2018.8558066
2018
Ekanayake S; Dutta R; Rahman F; Xuan BM, 2018, 'Position Sensorless Control of an Interior Permanent Magnet Synchronous Machine (IPMSM) in Deep Flux-weakening Region', in 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives, SLED 2018, pp. 114 - 119, http://dx.doi.org/10.1109/SLED.2018.8486136
2018
Pouramin A; Dutta R; Rahman MF, 2017, 'Preliminary study on differences in the performance characteristics of concentrated and distributed winding IPM machines with different rotor topologies', in 2017 IEEE Energy Conversion Congress and Exposition, ECCE 2017, Cincinnati, OH, USA, pp. 3565 - 3570, presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA, 01 October 2017 - 05 October 2017, http://dx.doi.org/10.1109/ECCE.2017.8096634
2017
Farshadnia M; Pouramin A; Dutta R; Fletcher JE, 2017, 'Airgap magnetic field estimation for IPM rotors considering their non-uniform local saturation', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056266
2017
Rathnayake RMHM; Dutta R; Fletcher JE; Xiao D, 2017, 'Torque ripple minimization of an IPMSG with fractional-slot, concentrated-winding using uncontrolled rectifier-connected boost converter control', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056212
2017
Ahsanullah K; Dutta R; Rahman F, 2017, 'Analysis of low-speed IPMMs with distributed and fractional slot concentrated windings designed for wind energy applications', in 2017 IEEE International Magnetics Conference, INTERMAG 2017, Dublin, Ireland, presented at 2017 IEEE International Magnetics Conference (INTERMAG), Dublin, Ireland, 24 April 2017 - 28 April 2017, http://dx.doi.org/10.1109/INTMAG.2017.8008036
2017
Pouramin A; Dutta R; Rahman MF, 2017, 'Challenges of considering saliency ratio in design optimization of IPM machines', in Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, pp. 1828 - 1833, http://dx.doi.org/10.1109/IECON.2017.8216309
2017
Pouramin A; Farshadnia M; Dutta R; Rahman MF, 2017, 'Tradeoffs in high-speed performance characteristics in optimization of saliency ratio and efficiency for designing FSCW IPM machines', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056386
2017
Ekanayake S; Dutta R; Xiao D; Rahman MF, 2017, 'Direct torque and flux control of a fractional-slot concentrated-winding IPMSM in deep flux-weakening region', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056372
2017
Ekanayake S; Pouramin A; Dutta R; Rahman MF, 2017, 'Verification of a novel voltage control strategy for MTPV control of a fractional-slot concentrated-winding IPMSM', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 21 May 2017 - 24 May 2017, http://dx.doi.org/10.1109/IEMDC.2017.8001867
2017
Pouramin A; Ekanayake S; Dutta R; Rahman MF, 2017, 'Challenges for including characteristic current as a design parameter in optimization of IPM machines', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 21 May 2017 - 24 May 2017, http://dx.doi.org/10.1109/IEMDC.2017.8002184
2017
Li J; Ekanayake S; Rahman MF; Dutta R; Huang X; Ma J; Fang Y, 2017, 'Deep flux weakening control with six-step overmodulation for a segmented interior permanent magnet synchronous motor', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056517
2017
Alshibani S; Dutta R; Agelidis VG, 2016, 'Optimization of a MW Halbach PMSG for wind turbine applications', in Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, pp. 1963 - 1969, http://dx.doi.org/10.1109/ICELMACH.2016.7732792
2016
Farshadnia M; Cheema MAM; Dutta R; Fletcher JE, 2016, 'Analytical modeling of pulsating torque in concentrated-wound interior permanent magnet machines to achieve maximum average torque under an open-phase fault condition', in 2016 IEEE 8th International Power Electronics and Motion Control Conference, IPEMC-ECCE Asia 2016, IEEE, Hefei, China, pp. 2813 - 2819, presented at 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), Hefei, China, 22 May 2016 - 26 May 2016, http://dx.doi.org/10.1109/IPEMC.2016.7512743
2016
Priestley M; Xiao D; Said NAM; Dutta R; Fletcher JE, 2016, 'Post-fault control strategy for IPMSMs with non-sinusoidal back-EMFs in an open-ended winding configuration', in IECON Proceedings (Industrial Electronics Conference), pp. 2879 - 2884, http://dx.doi.org/10.1109/IECON.2016.7793768
2016
Rathnayake RMHM; Dutta R; Fletcher JE, 2016, 'Control of direct driven fractional slot concentrated wound-IPMSG for variable speed wind energy system', in Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, IEEE, Lausanne, SWITZERLAND, pp. 1001 - 1007, presented at 22nd International Conference on Electrical Machines (ICEM), Lausanne, SWITZERLAND, 04 September 2016 - 07 September 2016, http://dx.doi.org/10.1109/ICELMACH.2016.7732648
2016
Mohd Said NA; Priestley M; Dutta R; Fletcher JE, 2016, 'Torque ripple minimization in dual inverter open-end winding PMSM drives with non-sinusoidal back-EMFs by harmonic current suppression', in IECON Proceedings (Industrial Electronics Conference), pp. 2975 - 2980, http://dx.doi.org/10.1109/IECON.2016.7793479
2016
Mohd Said NA; Xiao D; Dutta R; Fletcher JE, 2016, 'Control strategy of post-fault operation in dual inverter-fed, PMSM considering zero sequence and back-emf harmonic', in IET Conference Publications, Glasgow, UK, presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Glasgow, UK, 19 April 2016 - 21 April 2016, http://dx.doi.org/10.1049/cp.2016.0228
2016
Rathnayake RMHM; Dutta R; Fletcher JE; Xiao D; Ekanayake S, 2016, 'Power and voltage control of a nonpitchable direct driven fractional slot concentrated wound-IPMSG based wind turbine operating above base speed', in IECON Proceedings (Industrial Electronics Conference), pp. 1961 - 1966, http://dx.doi.org/10.1109/IECON.2016.7793453
2016
Farshadnia M; Cheema M; Dutta R; Fletcher J; Rahman FM, 2016, 'Detailed analytical modelling of fractional-slot concentrated-wound interior permanent magnet machines for prediction of torque ripple', in Energy Conversion Congress and Exposition (ECCE), 2016 IEEE, IEEE, Milwaukee, WI, presented at 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 18 September 2016 - 22 September 2016, http://dx.doi.org/10.1109/ECCE.2016.7855035
2016
Ekanayake S; Dutta R; Rahman MF; Rathnayake RMHM, 2016, 'A modified single-current-regulator control scheme for deep flux-weakening operation of interior permanent magnet synchronous motors', in IECON Proceedings (Industrial Electronics Conference), IEEE, Florence, Italy, pp. 2624 - 2629, presented at IECON 2016 - 42nd Annual Conference, Florence, Italy, 23 October 2016 - 26 October 2016, http://dx.doi.org/10.1109/IECON.2016.7793424
2016
Farshadnia M; Cheema MAM; Dutta R; Fletcher JE; Lovatt HC; Rahman MF, 2016, 'An extended dq model for concentrated-wound interior permanent magnet machines considering non-ideal machine parameters', in IET Conference Publications, Glasgow, UK, presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Glasgow, UK, 19 April 2016 - 21 April 2016, http://dx.doi.org/10.1049/cp.2016.0180
2016
Ekanayake S; Dutta R; Rahman MF; Xiao D; Fletcher J, 2016, 'Operation along the maximum torque per voltage trajectory in a direct torque and flux controlled interior permanent magnet synchronous motor', in IET Conference Publications, http://dx.doi.org/10.1049/cp.2016.0326
2016
Rathnayake R; Dutta R; Fletcher J; Xiao D, 2015, 'Modified efficiency optimization control for fractional slot concentrated wound interior permanent magnet synchronous generators', in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, IEEE, Yokohama, Japan, pp. 002986 - 002991, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2016, http://dx.doi.org/10.1109/IECON.2015.7392557
2015
Mohd Said N; Xiao D; Dutta R; Fletcher J, 2015, 'Closed-loop control strategy for PM machines with non-sinusoidal back-EMFs using dual-inverter open-end winding', in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, IEEE, Yokohama, Japan, pp. 002998 - 003003, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2015, http://dx.doi.org/10.1109/IECON.2015.7392559
2015
Ekanayake S; Dutta R; Rahman F; Xiao D, 2015, 'Deep flux weakening control of a segmented interior permanent magnet synchronous motor with maximum torque per voltage control', in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, IEEE, Yokohama, Japan, pp. 004802 - 004807, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2015, http://dx.doi.org/10.1109/IECON.2015.7392851
2015
Pouramin A; Dutta R; Rahman MF; Fletcher JE; Xiao D, 2015, 'A preliminary study of the effect of saturation and cross-magnetization on the inductances of a fractional-slot concentrated-wound interior PM synchronous machine', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 828 - 833, http://dx.doi.org/10.1109/PEDS.2015.7203522
2015
Pouraminaein A; Dutta R; Rahman F; Xiao D, 2015, 'Inductances of a fractional-slot concentrated-winding interior PM synchronous machine considering effects of saturation and cross magnetization', in 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015, IEEE, Montreal, QC, pp. 6075 - 6081, presented at 2015 IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, QC, 20 September 2015 - 24 September 2015, http://dx.doi.org/10.1109/ECCE.2015.7310511
2015
Rathnayake RMHM; Dutta R; Fletcher JE; Ahsanullah K; Xiao D, 2015, 'Efficiency analysis of a 42- pole/54-slot fractional-slot concentrated-wound interior permanent magnet synchronous machine', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1041 - 1046, http://dx.doi.org/10.1109/PEDS.2015.7203472
2015
Farshadnia M; Cheema M; Dutta R; Fletcher J; Rahman F, 2015, 'Anomalies in experimental measurement of operational inductances of a concentrated-wound IPM machine under field-weakening region', in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, IEEE, Yokohama, Japan, pp. 004880 - 004885, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2015, http://dx.doi.org/10.1109/IECON.2015.7392865
2015
Nguyen D; Dutta R; Fletcher J; Rahman F; Lovatt H, 2014, 'Performance analysis of a new concentratedwinding interior permanent magnet synchronous machine under Field Oriented Control', in 2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014, pp. 2679 - 2685, http://dx.doi.org/10.1109/IPEC.2014.6869969
2014
Said NAM; Fletcher JE; Dutta R; Dan Xiao , 2014, 'Analysis of common mode voltage using carrier-based method for dual-inverter open-end winding', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 6, presented at Power Engineering Conference (AUPEC), 2014 Australasian Universities, http://dx.doi.org/10.1109/AUPEC.2014.6966628
2014
Dutta R; Chai M; Xiao D; Fletcher JE, 2014, 'Overmodulation Techniques for the Three-to-Five Phase Indirect Matrix Converter with Space Vector PWM', in IECON 2014 - 40th Annual Conference of the Industrial Electronics Society, Dallas, Texas USA, pp. 3330 - 3336, presented at IECON'2014 The 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, Texas USA, 29 October 2014 - 01 November 2014, http://dx.doi.org/10.1109/IECON.2014.7048990
2014
Farshadnia M; Dutta R; Fletcher JE; Ahsanullah K; Rahman MF; Lovatt HC, 2014, 'Analysis of MMF and back-EMF waveforms for fractional-slot concentrated-wound permanent magnet machines', in Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014, pp. 1976 - 1982, http://dx.doi.org/10.1109/ICELMACH.2014.6960455
2014
Daming Zhang ; Dutta R, 2014, 'Application of partial direct-pole-placement and differential evolution algorithm to optimize controller and LCL filter design for grid-tied inverter', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 6, presented at Power Engineering Conference (AUPEC), 2014 Australasian Universities, http://dx.doi.org/10.1109/AUPEC.2014.6966518
2014
Nguyen D; Dutta R; Rahman MF, 2013, 'Investigating characteristics of a concentrated-winding interior permanent magnet synchronous machine for sensorless direct torque control', in SLED/PRECEDE 2013 - 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics, http://dx.doi.org/10.1109/SLED-PRECEDE.2013.6684505
2013
Chai M; Dutta R; Fletcher J, 2013, 'Space vector PWM for three-to-five phase indirect matrix converters with d2-q2 vector elimination', in IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, pp. 4937 - 4942, presented at 39th Annual Conference on IEEE Industrial Electronics Society, Vienna, Austria, 10 November 2013 - 13 November 2013, http://dx.doi.org/10.1109/IECON.2013.6699934
2013
Chai M; Dutta R; Fletcher JE, 2013, 'Space vector PWM for five-to-three phase conventional matrix converter with d2-q2 vector elimination', in 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013, pp. 1328 - 1333, http://dx.doi.org/10.1109/ECCE-Asia.2013.6579282
2013
Nguyen D; Dutta R; Rahman MF, 2013, 'Investigation of sensorless direct torque control using high frequency injection apply to a fractional-slot concentrated winding interior PMSM', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1312 - 1317, http://dx.doi.org/10.1109/PEDS.2013.6527222
2013
Ahsanullah KA; Dutta R; Rahman F, 2013, 'Distributed and concentrated winding Interior PM Synchronous Machine (IPMSM) for direct drive wind turbine', in IECON Proceedings (Industrial Electronics Conference), Vienna, Austria, pp. 2762 - 2767, presented at Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE., Vienna, Austria, 13 October 2013 - 13 November 2013, http://dx.doi.org/10.1109/IECON.2013.6699568
2013
Ahsanullah K; Dutta R; Fletcher J; Rahman MF, 2013, 'Design of an interior permanent magnet synchronous machine suitable for direct drive wind turbine', in Renewable Power Generation Conference (RPG 2013), 2nd IET, Beijing, China, presented at 2nd IET Renewable Power Generation Conference (RPG 2013), Beijing, China, 09 September 2013 - 11 September 2013, http://dx.doi.org/10.1049/cp.2013.1810
2013
Ahsanullah K; Dutta R; Rahman MF, 2013, 'Investigation of flat and V-shaped magnets in interior permanent magnet machine for direct drive wind turbine application', in 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013, pp. 208 - 213, http://dx.doi.org/10.1109/ECCE-Asia.2013.6579098
2013
Chong L; Dutta R; Rahman MF, 2013, 'Performance comparison between concentrated and distributed wound IPM machines used for field weakening applications', in International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2011 and Electromotion 2011 Joint Conference, pp. 616 - 619, http://dx.doi.org/10.1109/ACEMP.2011.6490670
2013
Ahsanullah K; Dutta R; Rahman MF, 2013, 'Design of a 4KW interior permanent magnet machine suitable for low speed application', in 2013 International Conference on Electrical Machines and Systems, ICEMS 2013, pp. 986 - 991, http://dx.doi.org/10.1109/icems.2013.6754377
2013
Nguyen D; Dutta R; Rahman MF, 2012, 'The preliminary results on Direct Torque Control for an fractional-slot concentrated winding Interior Permanent Magnet Synchronous Machine', in Conference Proceedings - 2012 IEEE 7th International Power Electronics and Motion Control Conference - ECCE Asia, IPEMC 2012, IEEE Computer Society, Washington, DC, United States, pp. 1020 - 1026, presented at 2012 IEEE 7th International Power Electronics and Motion Control Conference - ECCE Asia, IPEMC 2012, Harbin, 02 June 2012 - 05 June 2012, http://dx.doi.org/10.1109/IPEMC.2012.6258941
2012
Dai N; Dutta R; Rahman MF, 2012, 'Comparative performance analysis of field-oriented control and direct torque control for a fractional-slot concentrated winding interior permanent magnet synchronous machine', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, pp. 879 - 885, presented at 2012 20th International Conference on Electrical Machines, ICEM 2012, Marseille, 02 September 2012 - 05 September 2012, http://dx.doi.org/10.1109/ICElMach.2012.6349980
2012
Alshibani S; Agelidis VG; Dutta R, 2012, 'Application of particle swarm optimization in the design of large permanent magnet synchronous generators for wind turbines', in 2012 IEEE International Conference on Power and Energy (PECon), IEEE, Kota Kinabalu, Malaysia, pp. 162 - 167, presented at 2012 IEEE International Conference on Power and Energy (PECon), Kota Kinabalu, Malaysia, 02 December 2012 - 05 December 2012, http://dx.doi.org/10.1109/PECon.2012.6450198
2012
Alshibani S; Dutta R; Agelidis VG, 2012, 'Flux density analysis of using Halbach array in MW level permanent magnet synchronous generators for wind turbines: A preliminary linear mode', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, France, pp. 274 - 280, presented at 2012 20th International Conference on Electrical Machines, ICEM 2012, Marseille, France, 02 September 2012 - 05 September 2012, http://dx.doi.org/10.1109/ICElMach.2012.6349877
2012
Alshibani S; Dutta R; Agelidis VG, 2012, 'An investigation of the use of a Halbach array in MW level permanent magnet synchronous generators', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, France, pp. 59 - 65, presented at 2012 XXth International Conference on Electrical Machines (ICEM), Marseille, France, 02 September 2012 - 05 September 2012, http://dx.doi.org/10.1109/ICElMach.2012.6349840
2012
Nguyen D; Dutta R; Rahman MF, 2012, 'Sensorless direct torque control of a fractional-slot concentrated winding interior permanent magnet synchronous machine using extended rotor flux model', in 2012 IEEE Symposium on Sensorless Control for Electrical Drives (SLED), IEEE, Milwaukee, WI, USA, pp. 1 - 6, presented at 2012 IEEE Symposium on Sensorless Control for Electrical Drives (SLED), Milwaukee, WI, USA, 21 September 2012 - 22 September 2012, http://dx.doi.org/10.1109/SLED.2012.6422805
2012
Ahsanullah K; Dutta R; Rahman MF, 2012, 'Review of PM Generator Designs for Direct-Drive Wind Turbines', in AUPEC 2012, IEEE, USA, pp. 1 - 6, presented at 2012 22nd Australasian Universities Power Engineering Conference (AUPEC), Bali, Indonesia, 26 September 2012 - 29 September 2012, http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6360197
2012
Chong GL; Dutta R; Rahman MF; Lovatt H, 2011, 'Experimental verification of core and magnet losses in a concentrated wound IPM machine with V-shaped magnets used in field weakening applications', in 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, IEEE Computer Society, Piscataway, NJ, USA, pp. 977 - 982, presented at 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, Niagara Falls, ON, Canada, 15 May 2011 - 18 May 2011, http://dx.doi.org/10.1109/IEMDC.2011.5994949
2011
Dutta R; Chong GL; Rahman MF, 2011, 'Analysis of CPSR in motoring and generating modes of an IPM motor', in 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, IEEE Computer Society, Piscataway, NJ, USA, pp. 1474 - 1479, presented at 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, Niagara Falls, ON, Canada, 15 May 2011 - 18 May 2011, http://dx.doi.org/10.1109/IEMDC.2011.5994826
2011
Chong GL; Dutta R; Xiao D; Rahman MF; Lovatt H, 2011, 'Experimental verification of open circuit parameters of an IPM machine with concentrated windings', in 2011 International Conference on Electrical Machines and Systems, ICEMS 2011, IEEE, Piscataway, NJ, United States, pp. 1 - 4, presented at International Conference on Electrical Machines and Systems (ICEMS), 2011, Beijing, China, 20 August 2011 - 23 August 2011, http://dx.doi.org/10.1109/ICEMS.2011.6073365
2011
Xu Z; Dutta R; Yin GX; Xu DX, 2011, 'Optimal stator-current trajectory control of an IPM synchronous machine for hybrid electric vehicles', in 8th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2011-ECCE Asia, IEEE, Jeju, South Korea, pp. 1958 - 1963, presented at Power Electronics and ECCE Asia (ICPE & ECCE), 2011 IEEE 8th International Conference on, Jeju, South Korea, 30 May 2011 - 03 June 2011, http://dx.doi.org/10.1109/ICPE.2011.5944443
2011
Chong GL; Dutta R; Rahman MF, 2010, 'Design of a Highly Efficient 1kW IPM Machine with a Very Wide Constant Power Speed Range', in Proceedings of International Power Electronics Conference -ECCE-Asia (IPEC),, IEEE, Japan, pp. 1956 - 1961, presented at International Power Electronics Conference -ECCE-Asia (IPEC), Japan, 21 June 2010 - 24 June 2010, http://dx.doi.org/10.1109/IPEC.2010.5543119
2010
Chong GL; Dutta R; Rahman MF; Nguyen QD; Lovatt H, 2010, 'Comparison of Concentrated and Distributed Windings in an IPM Machine for Field Weakening Applications', in 2010 20th Australasian Universities Power Engineering Conference (AUPEC 2010), IEEE, Piscataway, NJ, USA, pp. 1 - 5, presented at Australasian Universities Power Engineering Conference (AUPEC), Christchurch, New Zealand, 05 December 2010 - 08 December 2010
2010
Chong GL; Dutta R; Rahman MF, 2010, 'A Comparative Study of Rotor Losses in an IPM with Single and Double Layer Concentrated Windings', in Proceedings of International Conference on Electrical Machines and Systems (ICEMS), IEEE, Korea, pp. 942 - 946, presented at International Conference on Electrical Machines and Systems (ICEMS), Korea
2010
Chong GL; Dutta R; Rahman MF, 2010, 'Field Weakening Performance of a Concentrated Wound PM Machine with Rotor and Magnet Geometry Variation', in Proceedings of general meeting of Power and Energy Society (PES),, IEEE, Minneapolis, USA, pp. 1 - 4, presented at Power and Energy Society General Meeting, 2010 IEEE, Minneapolis, MN, 25 July 2010 - 29 July 2010, http://dx.doi.org/10.1109/PES.2010.5589868
2010
Rahman MF; Chong GL; Dutta RD, 2009, 'Design of IPM machine with Concentrated Windings for Vehicular Applications', in EPE 2009 Barcelona, IEEE, Barcelona, Spain, presented at European Power Engineering Conference, Barcelona, Spain, 08 September 2009 - 10 September 2009
2009
Rahman MF; Chong GL; Dutta RD, 2009, 'Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications', in Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications, IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009
2009
Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Thermal Considerations of an Interior Permanent Magnet Machine with Conctrated Windings', in Electrical Machines and Systems, 2009. ICEMS 2009. International Conference on, IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009, http://dx.doi.org/10.1109/ICEMS.2009.5382698
2009
Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Mechanical Consideration of an IPM Machine with Concentrated Windings', in AUPEC'09 - 19th Australasian Universities Power Engineering Conference: Sustainable Energy Technologies and Systems, IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009
2009
Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-Slot Concentrated Windings, Part II: Including Armature Reaction', in Australasian Universities Power Engineering Conference (AUPEC 2008), The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008
2008
Chong GL; Dutta RD; Rahman MF, 2008, 'Open-circuit analysis of concentrated winding in interior permanent magnet machines', in UKACC International Conference on Control 1998, 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008
2008
Dutta RD, 2008, 'Effect of Rotor Magnet Segmentational of the Constant-Power Speed Range of an IPM Machine for Traction Application', in ICEMS 2008 International perference on Electrical Machines & Systems, ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008
2008
Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-slot Cencentrated Windings, Part I : Open-circuit Analysis', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008
2008
Chong L; Dutta R; Rahman MF, 2008, 'Open circuit analysis of concentrated winding in interior permanent magnet machines with fractional slot distribution', in IET Conference Publications, pp. 235 - 239, http://dx.doi.org/10.1049/cp:20080518
2008
Dutta RD; Sayeef SM; Rahman MF, 2007, 'Analysis of cogging torque and its effect on direct torque control (DTC) in a segmented interior permanent magnet machine', in IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, pp. 2568 - 2574, presented at IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, 17 June 2007 - 21 June 2007, http://dx.doi.org/10.1109/PESC.2007.4342420
2007
Dutta RD; Sayeef SM; Rahman MF, 2007, 'Cogging torque analysis of a segmented interior permanent magnet machine', in International Electric Machines and Drives Conference, Antalya, Turkey, pp. 781 - 786, presented at International Electric Machines and Drives Conference 2007, Antalya, Turkey, 03 May 2007 - 05 May 2007, http://dx.doi.org/10.1109/IEMDC.2007.382767
2007
Rahman MF; Dutta RD; Chong GL, 2007, 'Application of concentrated windings in interior permanent magnet machine', in Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, presented at Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, 09 December 2007 - 12 December 2007, http://dx.doi.org/10.1109/AUPEC.2007.4548069
2007
Rahman MF; Dutta RD, 2006, 'Experimental verification of a segmented magnet interior permanent magnet machine (IPM) with wide constant power speed range (CPSR)', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006
2006
Rahman MF; Dutta RD, 2006, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', in 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, pp. 1375 - 1380, presented at 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 07 November 2006 - 10 November 2006, http://dx.doi.org/10.1109/IECON.2006.347681
2006
Dutta RD; Rahman MF, 2005, 'A Segmented Magnet Interior Permanent Magnet Machine and Its Control', in 2nd National Power Electronics Conference, 2nd National Power Electronics Conference, Calcutta, India, presented at 2nd National Power Electronics Conference, Calcutta, India, 22 December 2005 - 24 December 2005
2005
Dutta RD; Rahman MF, 2005, 'Effect of Iron Loss on the Performance of Interior Permanent Magnet Machines', in Australasian Universities Power Engineering Conference (AUPEC 2005), Australasian Universities Power Engineering Conference (AUPEC 2005), Hobart, presented at Australasian Universities Power Engineering Conference (AUPEC 2005), Hobart, 25 September 2005 - 28 September 2005
2005
Dutta RD; Rahman MF, 2005, 'Analysis and Comparison of Methods for Determining d- and q-axes Inductances of IPM Machines', in IEEE International Electric Machines and Drives Conference 2005, San Antonio, Texas, pp. 359 - 365, presented at IEEE International Electric Machines and Drives Conference 2005, San Antonio, Texas, 15 May 2005 - 18 May 2005
2005
Dutta RD; Rahman MF, 2005, 'A Segmented Magnet Interior Permanent Magnet Machine with Wide Constant Power Range for Traction Application in Hybrid Vehicles', in IEEE Vehicle Power and Propulsion Conference (VPPC 2005), Chicago Illinois USA, pp. 288 - 293, presented at IEEE Vehicle Power and Propulsion Conference (VPPC`05), Chicago Illinois USA, 07 September 2005 - 09 September 2005, http://dx.doi.org/10.1109/VPPC.2005.1554572
2005
Dutta RD; Rahman MF, 2005, 'Comparison of Core Loss Prediction Methods for the Interior Permanent Magnet Machine', in Rumzi N; Indris N (ed.), 2005 International Conference on Power Electronics and Drive Systems (PEDS 2005), IEEE, Kuala Lumpur, Malayasia, pp. 1396 - 1401, presented at International Conference on Power Electronics and Drive Systems 2005, Kuala Lumpur, Malayasia, 28 November 2005 - 01 December 2005
2005
Dutta RD; Rahman MF, 2004, 'The vector control techniques for low voltage IPM machine in 42V sytem', in Australasian Universities Power Engineering Conference (AUPEC 2004), Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, presented at Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, 26 September 2004 - 29 September 2004
2004
Dutta RD; Rahman MF, 2004, 'A novel IPM machine for integrated starter alternator application', in Australasian Universities Power Engineering Conference (AUPEC 2004), Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, presented at Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, 26 September 2004 - 29 September 2004
2004
Dutta RD; Rahman MF, 2004, 'Investigation of suitable vector control techniques for low voltage IPM machine in 42V system', in Annual conference of IEEE industrial electronics society (IECON 2004), Busan, South Korea, pp. 2724 - 2728, presented at Annual conference of IEEE industrial electronics society (IECON 2004), Busan, South Korea, 02 November 2004 - 06 November 2004, http://dx.doi.org/10.1109/IECON.2004.1432237
2004
Rahman MF; Dutta RD, 2003, 'A New Rotor Design of IPM Machine Suitable for Wide-Speed Range', in Australasian Universities Power Engineering Conference (AUPEC 2003), Australasian Universities Power Engineering Conference (AUPEC 2003), University of Canterbury, Christchurch, NZ, presented at Australasian Universities Power Engineering Conference (AUPEC 2003), University of Canterbury, Christchurch, NZ, 28 September 2003 - 01 October 2003
2003
Rahman F; Dutta R, 2003, 'A New Rotor Design of Interior Permanent Magnet machine suitable for wide speed range', in IECON Proceedings (Industrial Electronics Conference), pp. 699 - 704, http://dx.doi.org/10.1109/IECON.2003.1280067
2003
Rahman MF; Dutta RD, 2003, 'An Investigation of a Segmented Rotor Interior PM Machine for Field Weakening', in 2003 International Conference on Power Electronics and Drive Systems, Singapore, pp. 491 - 496, presented at International Conference on Power Electronics and Drive Systems 2003, Singapore, 17 November 2003 - 20 November 2003, http://dx.doi.org/10.1109/PEDS.2003.1282888
2003
Journal articles
add
Pouramin A; Dutta R; Farshadnia M; Rahman MF, 2020, 'A Standstill Method to Measure Electromagnetically Induced Torque Ripple of Permanent Magnet Synchronous Machines', IEEE Transactions on Instrumentation and Measurement, vol. 69, pp. 7627 - 7635, http://dx.doi.org/10.1109/TIM.2020.2983528
2020
Chu G; Dutta R; Pouramin A; Rahman MF, 2020, 'Analysis of torque ripple of a spoke-type interior permanent magnet machine', Energies, vol. 13, pp. 2886 - 2886, http://dx.doi.org/10.3390/en13112886
2020
Sapkota P; Boyer C; Dutta R; Cazorla C; Aguey-Zinsou KF, 2020, 'Planar polymer electrolyte membrane fuel cells: Powering portable devices from hydrogen', Sustainable Energy and Fuels, vol. 4, pp. 439 - 468, http://dx.doi.org/10.1039/c9se00861f
2020
Wu F; Ge H; El-Refaie AM; Farshadnia M; Pouramin A; Dutta R, 2020, 'Partially-Coupled d-q-0 Components of Magnetically-Isolated FSCW IPM Machines with Open-End-Winding Drives', IEEE Transactions on Industry Applications, vol. 56, pp. 1397 - 1407, http://dx.doi.org/10.1109/TIA.2020.2964251
2020
Chu G; Dutta R; Rahman MF; Lovatt H; Sarlioglu B, 2020, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of Interior Permanent-Magnet Synchronous Machines', IEEE Transactions on Industry Applications, vol. 56, pp. 1321 - 1331, http://dx.doi.org/10.1109/TIA.2019.2960756
2020
Ekanayake S; Dutta R; Rahman MF; Bui MX, 2019, 'Performances of a Fractional-Slot Concentrated-Winding Permanent Magnet Synchronous Machine under Position Sensorless Control in Deep Flux-Weakening Region', IEEE Transactions on Industry Applications, vol. 55, pp. 5938 - 5946, http://dx.doi.org/10.1109/TIA.2019.2931269
2019
Ekanayake S; Dutta R; Rahman MF; Xiao D, 2018, 'Direct torque and flux control of interior permanent magnet synchronous machine in deep flux-weakening region', IET Electric Power Applications, vol. 12, pp. 98 - 105, http://dx.doi.org/10.1049/iet-epa.2017.0147
2018
Farshadnia M; Cheema MAM; Dutta R; Fletcher JE, 2017, 'Analytical Modeling of Armature Reaction Air-Gap Flux Density Considering the Non-Homogeneously Saturated Rotor in a Fractional-Slot Concentrated-Wound IPM Machine', IEEE Transactions on Magnetics, vol. 53, http://dx.doi.org/10.1109/TMAG.2016.2623797
2017
Ahsanullah K; Dutta R; Rahman MF, 2017, 'Analysis of Low-Speed IPMMs with Distributed and Fractional Slot Concentrated Windings for Wind Energy Applications', IEEE Transactions on Magnetics, vol. 53, http://dx.doi.org/10.1109/TMAG.2017.2726117
2017
Farshadnia M; Cheema MAM; Pouramin A; Dutta R; Fletcher JE, 2017, 'Design of Optimal Winding Configurations for Symmetrical Multiphase Concentrated-Wound Surface-Mount PMSMs to Achieve Maximum Torque Density under Current Harmonic Injection', IEEE Transactions on Industrial Electronics, vol. 65, pp. 1751 - 1761, http://dx.doi.org/10.1109/TIE.2017.2745464
2017
Farshadnia M; Cheema MAM; Dutta R; Fletcher J; Rahman M, 2017, 'Detailed Analytical Modelling of Fractional-Slot Concentrated-Wound Interior Permanent Magnet Machines for Prediction of Torque Ripple', IEEE Transactions on Industry Applications, vol. 53, pp. 5272 - 5283, http://dx.doi.org/10.1109/TIA.2017.2722418
2017
Chai M; Xiao D; Dutta R; Fletcher JE, 2016, 'Space vector PWM techniques for three-to-five-phase indirect matrix converter in the overmodulation region', IEEE Transactions on Industrial Electronics, vol. 63, pp. 550 - 561, http://dx.doi.org/10.1109/TIE.2015.2475416
2016
Dutta R; Ahsanullah K; Rahman F, 2016, 'Cogging torque and torque ripple in a direct-drive interior permanent magnet generator', Progress In Electromagnetics Research B, vol. 70, pp. 73 - 85, http://dx.doi.org/10.2528/PIERB16072001
2016
Nguyen D; Dutta R; Rahman MF; Fletcher JE, 2016, 'Performance of a Sensorless Controlled Concentrated-Wound Interior Permanent-Magnet Synchronous Machine at Low and Zero Speed', IEEE Transactions on Industrial Electronics, vol. 63, pp. 2016 - 2026, http://dx.doi.org/10.1109/TIE.2015.2506138
2016
Dutta R; Ahsanullah K; Rahman MF, 2014, 'Preliminary Design Analysis of Low Speed Interior Permanent Magnet Machine with Distributed and Concentrated Windings', JICEMS (Journal of International Conference on Electrical Machines and Systems), vol. 2, pp. 139 - 147, http://www.jicems.org/ltkpsweb/pub/pubregistrationview.aspx?ppseq=233&from=pubissue.aspx?puseq=67
2014
Dutta R; Chong L; Rahman MF, 2014, 'Review of the impact of parameter variation on the operating speed range of the interior permanent magnet synchronous machine', Australian Journal of Electrical & Electronic Engineering, vol. 11, pp. 10 - 17
2014
Alshibani S; Agelidis VG; Dutta R, 2014, 'Lifetime cost assessment of permanent magnet synchronous generators for mw level wind turbines', IEEE Transactions on Sustainable Energy, vol. 5, pp. 10 - 17, http://dx.doi.org/10.1109/TSTE.2013.2271781
2014
Dutta R; Chong L; Rahman MF, 2013, 'Design and experimental verification of an 18-slot/14-pole fractional-slot concentrated winding interior permanent magnet machine', IEEE Transactions on Energy Conversion, vol. 28, pp. 181 - 190, http://dx.doi.org/10.1109/TEC.2012.2229281
2013
Dutta R; Rahman MF; Chong GL, 2012, 'Winding Inductances of an Interior Permanent Magnet (IPM) Machine With Fractional Slot Concentrated Winding', IEEE Transactions on Magnetics, vol. 48, pp. 4842 - 4849, http://dx.doi.org/10.1109/TMAG.2012.2203140
2012
Chong GL; Dutta R; Rahman MF, 2010, 'Electromagnetic Losses in a 1kW Concentric Wound IPM Machine for Field Weakening Applications', Journal of Applied Superconductivity and Electromagnetics (JASEM), vol. 1, pp. 95 - 100, http://association-asem.org/General_Information
2010
Chong GL; Dutta RD; Rahman MF, 2009, 'Application of concentrated windings in the interior permanent magnet machine', Australian Journal of Electrical and Electronics Engineering, vol. 5, pp. 229 - 236
2009
Dutta RD; Rahman MF, 2008, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', IEEE Transactions on Energy Conversion, vol. 23, pp. 25 - 33, http://dx.doi.org/10.1109/TEC.2007.905061
2008
Dutta RD; Rahman MF, 2007, 'Analysis and comparison of methods for determining d- and q-axes inductances of IPM machines', Australian Journal of Electrical and Electronics Engineering, vol. 3, pp. 189 - 199
2007
Rahman MF; Dutta RD, 2006, 'A comparative analysis of two test methods of measuring d- and q-axes inductances of interior permanent-magnet machine', IEEE Transactions on Magnetics, vol. 42, pp. 3712 - 3718, http://dx.doi.org/10.1109/TMAG.2006.880994
2006
Dutta RD; Rahman MF, 2005, 'Interior Permanent Magnet Generator: Generator of New Millennium', International Energy Journal, vol. 6, pp. 51 - 57
2005
Book Chapters
add
Rahman F; Dutta R; Xiao D, 2019, 'Chapter 2 Electric machines, dynamic models and sensors in drive systems', in Modeling, Simulation and Control of Electrical Drives, Institution of Engineering and Technology, Stevenage, United Kingdom, pp. 15 - 62, http://dx.doi.org/10.1049/PBCE118E
2019
Rahman F; Dutta R, 2013, 'Control of Interior Permanent Magnet Synchronous Machines', in AC Electric Motors Control: Advanced Design Techniques and Applications, Wiley & Sons, Ltd, pp. 398 - 428, http://dx.doi.org/10.1002/9781118574263.ch19
2013
Rahman F; Dutta R, 2013, 'AC Motor Control Applications in Vehicle Traction', in AC Electric Motors Control: Advanced Design Techniques and Applications, Wiley, Somerset, NJ, USA, pp. 453 - 486, http://dx.doi.org/10.1002/9781118574263.ch21
2013