Dr Cheng Wang
Postdoctoral Fellow

Dr Cheng Wang

  • 2012: BE in Mechanical Engineering, UNSW Australia
  • 2016: ME (Research) in Mechanical Engineering, UNSW Australia
  • 2020: PhD in Mechanical Engineering, UNSW Australia
Engineering
Mechanical and Manufacturing Engineering

Dr Cheng Wang is currently a postdoctoral fellow in the School of Mechanical and Manufacturing Engineering at the University of New South Wales (UNSW).

Phone
+61-2-9065 0297
Location
Room 401, Level 4, Mechanical & Manufacturing Engineering Building, UNSW, High St., Kensington 2052, NSW, Australia
  • Book Chapters | 2022
    2022, 'Cellulose-based flame retardants for polymeric materials', in Bio-based Flame-Retardant Technology for Polymeric Materials, Elsevier, pp. 97 - 131, http://dx.doi.org/10.1016/B978-0-323-90771-2.00002-X
  • Journal articles | 2023
    2023, 'Flame resistive silicone elastomeric powder-based coatings with excellent localized dielectric breakdown strength, loss tangent and thermal stability for electrical insulation', Powder Technology, 416, pp. 118184 - 118184, http://dx.doi.org/10.1016/j.powtec.2022.118184
    Journal articles | 2023
    2023, 'Numerical modeling of wet steam infused fluid mixture for potential fire suppression applications', Experimental and Computational Multiphase Flow, 5, pp. 142 - 148, http://dx.doi.org/10.1007/s42757-021-0107-5
    Journal articles | 2023
    2023, 'Soot: A review of computational models at different length scales', Experimental and Computational Multiphase Flow, 5, pp. 1 - 14, http://dx.doi.org/10.1007/s42757-021-0124-4
    Journal articles | 2022
    2022, 'Evaluate the effect of graphene and milled glass fibre on the thermal, flame and dielectric properties of silicone elastomer filled with aluminium hydroxide', Composites Communications, 34, pp. 101276 - 101276, http://dx.doi.org/10.1016/j.coco.2022.101276
    Journal articles | 2022
    2022, 'Nanohybrid of Co3O4 Nanoparticles and Polyphosphazene-Decorated Ultra-Thin Boron Nitride Nanosheets for Simultaneous Enhancement in Fire Safety and Smoke Suppression of Thermoplastic Polyurethane', Polymers, 14, pp. 4341 - 4341, http://dx.doi.org/10.3390/polym14204341
    Journal articles | 2022
    2022, 'On the Large Eddy Simulation Modelling of Water Suppression Systems Droplet Impact and Coverage Area', Fire, 5, pp. 165 - 165, http://dx.doi.org/10.3390/fire5050165
    Journal articles | 2022
    2022, 'Pyrolysis and combustion characterisation of HDPE/APP composites via molecular dynamics and CFD simulations', Journal of Analytical and Applied Pyrolysis, 163, http://dx.doi.org/10.1016/j.jaap.2022.105499
    Journal articles | 2022
    2022, 'Review on polymer composites with high thermal conductivity and low dielectric properties for electronic packaging', Materials Today Physics, 22, http://dx.doi.org/10.1016/j.mtphys.2021.100594
    Journal articles | 2022
    2022, 'Size-stable, smart impact-protective material fabricated via dual-network strategy with impact-hardening effect and self-healing ability', Materials Today Chemistry, 24, http://dx.doi.org/10.1016/j.mtchem.2022.100847
    Journal articles | 2022
    2022, 'Testing of aluminium composite panels in a cone calorimeter: A new specimen preparation method', Polymer Testing, 106, http://dx.doi.org/10.1016/j.polymertesting.2021.107454
    Journal articles | 2022
    2022, 'Thermal Hazard and Smoke Toxicity Assessment of Building Polymers Incorporating TGA and FTIR—Integrated Cone Calorimeter Arrangement', Fire, 5, pp. 139 - 139, http://dx.doi.org/10.3390/fire5050139
    Journal articles | 2021
    Li A; Yuen ACY; Wang W; De Cachinho Cordeiro IM; Wang C; Chen TBY; Zhang J; Chan QN; Yeoh GH, 2021, 'A review on lithium-ion battery separators towards enhanced safety performances and modelling approaches', Molecules, 26, http://dx.doi.org/10.3390/molecules26020478
    Journal articles | 2021
    Nazir MT; Khalid A; Kabir I; Wang C; Baena J-C; Akram S; Bhutta MS; Yasin G; Phung T; Yeoh G, 2021, 'Flame Retardancy and Excellent Electrical Insulation Performance of RTV Silicone Rubber', Polymers, 13, pp. 2854 - 2854, http://dx.doi.org/10.3390/polym13172854
    Journal articles | 2021
    2021, 'A systematic approach to formulate numerical kinetics for furnishing materials fire simulation with validation procedure using cone/FT-IR data', Heat and Mass Transfer/Waerme- und Stoffuebertragung, http://dx.doi.org/10.1007/s00231-021-03144-4
    Journal articles | 2021
    2021, 'BODIPY coated on MXene nanosheets for improving mechanical and fire safety properties of ABS resin', Composites Part B: Engineering, 223, http://dx.doi.org/10.1016/j.compositesb.2021.109130
    Journal articles | 2021
    2021, 'Fire-Resistant Flexible Polyurethane Foams via Nature-Inspired Chitosan-Expandable Graphite Coatings', ACS Applied Polymer Materials, 3, pp. 4079 - 4087, http://dx.doi.org/10.1021/acsapm.1c00580
    Journal articles | 2021
    2021, 'Synergistic effect of additives on electrical resistivity, fire and smoke suppression of silicone rubber for high voltage insulation', Composites Communications, pp. 101045 - 101045, http://dx.doi.org/10.1016/j.coco.2021.101045
    Journal articles | 2021
    2021, 'Wet or dry multifunctional coating prepared by visible light polymerisation with fire retardant, thermal protective, and antimicrobial properties', Cellulose, 28, pp. 8821 - 8840, http://dx.doi.org/10.1007/s10570-021-04095-z
    Journal articles | 2020
    Chen Q; Chen TBY; Yuen ACY; Wang C; Chan QN; Yeoh GH, 2020, 'Investigation of door width towards flame tilting behaviours and combustion species in compartment fire scenarios using large eddy simulation.', International Journal of Heat and Mass Transfer, 150, pp. 119373 - 119373, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.119373
    Journal articles | 2020
    Liu H; Wang C; De Cachinho Cordeiro IM; Yuen ACY; Chen Q; Chan QN; Kook S; Yeoh GH, 2020, 'Critical assessment on operating water droplet sizes for fire sprinkler and water mist systems', Journal of Building Engineering, 28, pp. 100999 - 100999, http://dx.doi.org/10.1016/j.jobe.2019.100999
    Journal articles | 2020
    Wang C; Yuen ACY; Chan QN; Chen TBY; Yang W; Cheung SCP; Yeoh GH, 2020, 'Characterisation of soot particle size distribution through population balance approach and soot diagnostic techniques for a buoyant non-premixed flame', Journal of the Energy Institute, 93, pp. 112 - 128, http://dx.doi.org/10.1016/j.joei.2019.04.004
    Journal articles | 2020
    Wang C; Yuen ACY; Chan QN; Chen TBY; Yip HL; Cheung SCP; Kook S; Yeoh GH, 2020, 'Numerical study of the comparison of symmetrical and asymmetrical eddy-generation scheme on the fire whirl formulation and evolution', Applied Sciences (Switzerland), 10, http://dx.doi.org/10.3390/app10010318
    Journal articles | 2020
    Yang W; Liu JJ; Wang LL; Wang W; Yuen ACY; Peng S; Yu B; Lu HD; Yeoh GH; Wang CH, 2020, 'Multifunctional MXene/natural rubber composite films with exceptional flexibility and durability', Composites Part B: Engineering, 188, pp. 107875 - 107875, http://dx.doi.org/10.1016/j.compositesb.2020.107875
    Journal articles | 2020
    Yuen ACY; Chen TBY; Wang C; Wei W; Kabir I; Vargas JB; Chan QN; Kook S; Yeoh GH, 2020, 'Utilising genetic algorithm to optimise pyrolysis kinetics for fire modelling and characterisation of chitosan/graphene oxide polyurethane composites', Composites Part B: Engineering, 182, http://dx.doi.org/10.1016/j.compositesb.2019.107619
    Journal articles | 2020
    2020, 'Corrigendum to “Investigation of door width towards flame tilting behaviours and combustion species in compartment fire scenarios using large eddy simulation.” [International Journal of Heat and Mass Transfer 150 (2020) 119373] (International Journal of Heat and Mass Transfer (2020) 150, (S0017931019348999), (10.1016/j.ijheatmasstransfer.2020.119373))', International Journal of Heat and Mass Transfer, 152, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.119552
    Journal articles | 2019
    Han Y; Wang X; Guo L; Yuen ACY; Liu H; Cao R; Wang C; Li C; Tu J; Yeoh GH, 2019, 'A Steam Ejector Refrigeration System Powered by Engine Combustion Waste Heat: Part 2. Understanding the Nature of the Shock Wave Structure', Applied Sciences, 9, pp. 4435 - 4435, http://dx.doi.org/10.3390/app9204435
    Journal articles | 2019
    Li A; Yuen ACY; Chen TBY; Wang C; Liu H; Cao R; Yang W; Yeoh GH; Timchenko V, 2019, 'Computational study of wet steam flow to optimize steam ejector efficiency for potential fire suppression application', Applied Sciences (Switzerland), 9, pp. 1486 - 1486, http://dx.doi.org/10.3390/app9071486
    Journal articles | 2019
    Si JY; Tawiah B; Sun WL; Lin B; Wang C; Yuen ACY; Yu B; Li A; Yang W; Lu HD; Chan QN; Yeoh GH, 2019, 'Functionalization of MXene nanosheets for polystyrene towards high thermal stability and flame retardant properties', Polymers, 11, http://dx.doi.org/10.3390/polym11060976
    Journal articles | 2019
    Wang C; Yin Yuen AC; Chan QN; Yuan Chen TB; Yang W; Cheung SCP; Yeoh GH, 2019, 'Sensitivity analysis of key parameters for population balance based soot model for low-speed diffusion flames', Energies, 12, pp. 910 - 910, http://dx.doi.org/10.3390/en12050910
    Journal articles | 2019
    Wang C; Yuen ACY; Chan QN; Chen TBY; Chen Q; Cao R; Yip HL; Kook S; Yeoh GH, 2019, 'Influence of eddy-generation mechanism on the characteristic of on-source fire whirl', Applied Sciences (Switzerland), 9, pp. 3989 - 3989, http://dx.doi.org/10.3390/app9193989
    Journal articles | 2019
    Yuen ACY; Chen TBY; Yang W; Wang C; Li A; Yeoh GH; Chan QN; Chan MC, 2019, 'Natural ventilated smoke control simulation case study using different settings of smoke vents and curtains in a large atrium', Fire, 2, pp. 1 - 18, http://dx.doi.org/10.3390/fire2010007
    Journal articles | 2018
    Chen TBY; Yuen AC; Wang C; Yeoh GH; Timchenko V; Cheung SCP; Chan S; Yang W, 2018, 'Predicting the fire spread rate of a sloped pine needle board utilizing pyrolysis modelling with detailed gas-phase combustion', International Journal of Heat and Mass Transfer, 125, pp. 310 - 322, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.04.093
    Journal articles | 2017
    Yuen ACY; Yeoh GH; Timchenko V; Chen TBY; Chan QN; Wang C; Li DD, 2017, 'Comparison of detailed soot formation models for sooty and non-sooty flames in an under-ventilated ISO room', International Journal of Heat and Mass Transfer, 115, pp. 717 - 729, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.08.074
    Journal articles | 2016
    Chan SN; Hawkes ; Wang C; Kook S; Medwell P; Lee J, 2016, 'External Irradiation Effect on the Growth and Evolution of In-Flame Soot Species', Carbon, http://dx.doi.org/10.1016/j.carbon.2016.02.039
    Journal articles | 2016
    Wang C; Chan QN; Zhang R; Kook S; Hawkes ER; Yeoh GH; Medwell PR, 2016, 'Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images', Journal of Nanoparticle Research, 18, http://dx.doi.org/10.1007/s11051-016-3434-x
    Journal articles | 1989
    Wang C; Pailthorpe MT, 1989, 'An Investigation of Wool Hydrolysis in Conventional Carbonizing', Textile Research Journal, 59, pp. 232 - 236, http://dx.doi.org/10.1177/004051758905900407
    Journal articles | 1989
    Wang C; Pailthorpe MT, 1989, 'Expanding the Use of the Rapid Ninhydrin Test Method', Textile Research Journal, 59, pp. 671 - 675, http://dx.doi.org/10.1177/004051758905901107
    Journal articles | 1987
    Wang C; Pailthorpe MT, 1987, 'A Rapid and Sensitive Method for Evaluating Wool Damage in Carbonizing', Textile Research Journal, 57, pp. 728 - 730, http://dx.doi.org/10.1177/004051758705701208
  • Conference Papers | 2015
    Chan S; Kook S; Hawkes ER; Wang C; Medwell PR; Lee J, 2015, 'Development of an in-flame thermophoretic soot sampling device', in Development of an in-flame thermophoretic soot sampling device, Australian Combustion Symposium, Melbourne, presented at Australian Combustion Symposium, Melbourne, 07 December 2015 - 09 December 2015, http://www.anz-combustioninstitute.org/local/papers/ACS2015-Proceedings.pdf
    Conference Papers | 2015
    Wang C; Chan SN; Kook S; Hawkes ER; Medwell PR; Lee J, 2015, 'External Irradiation Effect on the Evolution of In-flame Soot Species', in Carbon, Melbourne, presented at Australian Combustion Symposium, Melbourne, 07 December 2015 - 09 December 2015, http://dx.doi.org/10.1016/j.carbon.2016.02.039

  • Computational fluid dynamics
  • Multiphase flow modelling
  • Fire/Combustion modelling
  • Combustion
  • Soot formation and destruction
  • Flame retardant material
  • Renewable energy