Dr Ebrahim Oromiehie

Dr Ebrahim Oromiehie

Senior Technical Officer
Engineering
Mechanical and Manufacturing Engineering

Dr Oromiehie is a Technical Officer in the Australian Research Council (ARC) Training Centre for Automated Manufacture of Advanced Composites (AMAC) and also a Postdoctoral Fellow in the School of Mechanical and Manufacturing Engineering at UNSW Sydney. He received his PhD and Master’s degree from UNSW Sydney.

Dr Oromiehie has about 7 years of experience, as a Mechanical Designer in designing and manufacturing of industrial measurement tools for the automobile industry and also as a Project Engineer in Oil & Gas industry.

He has collaborated with several research groups, institute and universities to implement different NDT techniques for structural health monitoring (SHM) of advanced composites. His major research interest is in automated fibre placement (AFP), online/in-situ process and structural health monitoring.

Phone
+61 2 93854165
Location
Ainsworth Building (J17) Level 2, Room 208A Kensington Campus
  • Book Chapters | 2022
    Shamsuddoha M; Oromiehie E; Prusty BG, 2022, 'Strength of Thermoplastic Carbon Fibre-PEEK Composite Tubes Under Combined Compression-Torsion Loading', in Composites Science and Technology, Springer Nature Singapore, pp. 67 - 90, http://dx.doi.org/10.1007/978-981-19-2424-8_4
    Book Chapters | 2016
    Oromiehie E; Prusty G; Rajan G, 2016, 'Introduction to Composite Materials and Smart Structures', in Structural Health Monitoring of Composite Structures Using Fiber Optic Methods, CRC Press, New York
  • Journal articles | 2024
    Oromiehie E; Kong A; Djukic L; Mata J; Rodgers DC; Prusty GB, 2024, 'Nanostructure characterisation of welded polyethylene using small angle X-ray scattering', Journal of Reinforced Plastics and Composites, http://dx.doi.org/10.1177/07316844241242194
    Journal articles | 2023
    Air A; Oromiehie E; Prusty BG, 2023, 'Design and manufacture of a Type V composite pressure vessel using automated fibre placement', Composites Part B: Engineering, 266, http://dx.doi.org/10.1016/j.compositesb.2023.111027
    Journal articles | 2023
    Air A; Shamsuddoha M; Oromiehie E; Prusty BG, 2023, 'Development of an automated fibre placement-based hybrid composite wheel for a solar-powered car', International Journal of Advanced Manufacturing Technology, 125, pp. 4083 - 4097, http://dx.doi.org/10.1007/s00170-023-10946-9
    Journal articles | 2023
    Islam F; Donough MJ; Oromiehie E; Phillips AW; St John NA; Prusty BG, 2023, 'Modelling the effect of hot gas torch heating on adjacent tows during automated fibre placement consolidation of thermoplastic composites', Journal of Thermoplastic Composite Materials, 36, pp. 4211 - 4236, http://dx.doi.org/10.1177/08927057221123477
    Journal articles | 2023
    Maung PT; Prusty BG; Donough MJ; Oromiehie E; Phillips AW; St John NA, 2023, 'Automated manufacture of optimised shape-adaptive compsite hydrofoils with curvilinear fibre paths for improved bend-twist performance', Marine Structures, 87, http://dx.doi.org/10.1016/j.marstruc.2022.103327
    Journal articles | 2023
    Oromiehie E; Nair V; Short K; Wei T; Bhattacharyya D; Prusty BG, 2023, 'Effect of He2+ ion irradiation on the mechanical properties of automated fibre placement (AFP) CF-PEEK thermoplastics composites', Scientific Reports, 13, http://dx.doi.org/10.1038/s41598-023-45742-8
    Journal articles | 2023
    Serubibi A; Hazell PJ; Escobedo JP; Wang H; Oromiehie E; Prusty GB; Phillips AW; St John NA, 2023, 'Fibre-metal laminate structures: High-velocity impact, penetration, and blast loading – A review', Composites Part A: Applied Science and Manufacturing, 173, http://dx.doi.org/10.1016/j.compositesa.2023.107674
    Journal articles | 2022
    Gain AK; Oromiehie E; Prusty BG, 2022, 'Nanomechanical characterisation of CF-PEEK composites manufactured using automated fibre placement (AFP)', Composites Communications, 31, http://dx.doi.org/10.1016/j.coco.2022.101109
    Journal articles | 2022
    Maung PT; Prusty BG; Oromiehie E; Phillips AW; St John NA, 2022, 'Design and manufacture of a shape-adaptive full-scale composite hydrofoil using automated fibre placement', International Journal of Advanced Manufacturing Technology, 123, pp. 4093 - 4108, http://dx.doi.org/10.1007/s00170-022-10527-2
    Journal articles | 2022
    Oromiehie E; Gain AK; Donough MJ; Prusty BG, 2022, 'Fracture toughness assessment of CF-PEEK composites consolidated using hot gas torch assisted automated fibre placement', Composite Structures, 279, http://dx.doi.org/10.1016/j.compstruct.2021.114762
    Journal articles | 2021
    Arns JY; Oromiehie E; Arns C; Prusty BG, 2021, 'Micro-CT analysis of process-induced defects in composite laminates using AFP', Materials and Manufacturing Processes, 36, pp. 1561 - 1570, http://dx.doi.org/10.1080/10426914.2020.1866192
    Journal articles | 2021
    Oromiehie E; Gain AK; Prusty BG, 2021, 'Processing parameter optimisation for automated fibre placement (AFP) manufactured thermoplastic composites', Composite Structures, 272, http://dx.doi.org/10.1016/j.compstruct.2021.114223
    Journal articles | 2021
    Shamsuddoha M; David M; Oromiehie E; Prusty BG, 2021, 'Distributed optical fibre sensor based monitoring of thermoplastic carbon composite cylinders under biaxial loading: Experimental and numerical investigations', Composite Structures, 261, http://dx.doi.org/10.1016/j.compstruct.2020.113277
    Journal articles | 2021
    Wanigasekara C; Oromiehie E; Swain A; Prusty BG; Nguang SK, 2021, 'Machine learning-based inverse predictive model for AFP based thermoplastic composites', Journal of Industrial Information Integration, 22, http://dx.doi.org/10.1016/j.jii.2020.100197
    Journal articles | 2020
    Oromiehie E; Garbe U; Gangadhara Prusty B, 2020, 'Porosity analysis of carbon fibre-reinforced polymer laminates manufactured using automated fibre placement', Journal of Composite Materials, 54, pp. 1217 - 1231, http://dx.doi.org/10.1177/0021998319875491
    Journal articles | 2020
    Wanigasekara C; Oromiehie E; Swain A; Prusty BG; Nguang SK, 2020, 'Machine Learning Based Predictive Model for AFP-Based Unidirectional Composite Laminates', IEEE Transactions on Industrial Informatics, 16, pp. 2315 - 2324, http://dx.doi.org/10.1109/TII.2019.2932398
    Journal articles | 2019
    Oromiehie E; Das Chakladar N; Rajan G; Prusty BG, 2019, 'Online monitoring and prediction of thermo-mechanics of AFP based thermoplastic composites', Sensors (Switzerland), 19, http://dx.doi.org/10.3390/s19061310
    Journal articles | 2019
    Oromiehie E; Prusty BG; Compston P; Rajan G, 2019, 'Automated fibre placement based composite structures: Review on the defects, impacts and inspections techniques', Composite Structures, 224, http://dx.doi.org/10.1016/j.compstruct.2019.110987
    Journal articles | 2017
    Oromiehie E; Gangadhara Prusty B; Compston P; Rajan G, 2017, 'In-situ simultaneous measurement of strain and temperature in automated fiber placement (AFP) using optical fiber Bragg grating (FBG) sensors', Advanced Manufacturing: Polymer and Composites Science, 3, pp. 52 - 61, http://dx.doi.org/10.1080/20550340.2017.1317447
    Journal articles | 2017
    Oromiehie E; Prusty G; Compston P; Rajan G, 2017, 'Characterization of process-induced defects in automated fiber placement manufacturing of composites using fiber Bragg grating sensors', Structural Health Monitoring, 17, pp. 108 - 117, http://dx.doi.org/10.1177/1475921716685935
    Journal articles | 2016
    Oromiehie E; Prusty G; Compston P; Rajan G, 2016, 'In-situ process monitoring for automated fibre placement using fibre Bragg grating sensors', Journal of structural health monitoring, 15, pp. 706 - 714, http://dx.doi.org/10.1177/1475921716658616
    Journal articles | 2016
    Oromiehie E; Rajan G; prusty G, 2016, 'Thermal sensitivity and relaxation of carbon fibre- foam sandwich composites with fibre optic sensors', Journal of sandwich structures and materials
  • Preprints | 2023
    Oromiehie E; Nair V; Short K; Wei T; Bhattacharyya D; Prusty BG, 2023, Effect of He 2+ Ion Irradiation on the Mechanical Properties of Automated Fibre Placement (Afp) Cf-peek Thermoplastics Composites, , http://dx.doi.org/10.21203/rs.3.rs-3027646/v1
    Preprints | 2022
    Air A; Shamsuddoha M; Oromiehie E; Prusty G, 2022, Development of an Automated Fibre Placement-based Hybrid Composite Wheel for a Solar Powered Car, , http://dx.doi.org/10.21203/rs.3.rs-2188408/v1
    Conference Papers | 2022
    Oromiehie E; Nair V; Short K; Bhattacharyya D; Prusty BG, 2022, 'EFFECTS OF ION IRRADIATION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMATED FIBRE PLACEMENT BASED THERMOPLASTIC COMPOSITES', in ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, pp. 1130 - 1139
    Conference Papers | 2022
    Serubibi A; Hazell PJ; Escobedo JP; Wang H; Oromiehie E; Prusty BG, 2022, 'Low-velocity impact behaviours of AFP manufactured fibre metal laminate structures', in Materials Today: Proceedings, pp. 421 - 429, http://dx.doi.org/10.1016/j.matpr.2021.11.362
    Conference Papers | 2021
    Serubibi A; Hazell P; Escobedo-Diaz JP; Wang H; Oromiehie E; Prusty G, 2021, 'Analysis of AFP manufactured fibre metal laminate structures under impact loading', Online, presented at ACAM10: 10th Australasian Congress on Applied Mechanics, Online, 29 November 2021, https://search.informit.org/doi/epdf/10.3316/informit.321692581209141
    Conference Presentations | 2017
    Oromiehie E; Mendoza G; Kapur R; Prusty G, 2017, 'Automated Fibre Placement: Parameter optimisation and Selective Reinforcement', presented at CARBON FIBRE FUTURES CONFERENCE ADVANCED MATERIALS FOR ADVANCED MANUFACTURING, THE PIER, GEELONG, Melbourne, 01 March 2017 - 03 March 2017
    Conference Posters | 2017
    Oromiehie E; Prusty G; Compston P; Rajan G, 2017, 'Smart Sensing in Automated Fibre Placement of Composites', presented at 9th Australasian Congress on Applied Mechanics, 27 November 2017 - 29 May 2018
    Conference Papers | 2017
    Oromiehie E; Prusty G; Compston P; Rajan G, 2017, 'The Influence Of Consolidation Force On The Performance Of AFP Manufactured Laminates', Xi’an, China, presented at 21 st International Conference on Composite Materials (ICCM), Xi’an, China, 20 August 2017 - 25 August 2017
    Conference Papers | 2017
    Oromiehie E; Prusty G; Paul C; Ginu R, 2017, 'Mechanical Characteristics of AFP Manufactured Composite Laminates', in http://www.iccm-central.org/Proceedings/ICCM21proceedings/ICCM21Proceedings.htm, Xi'an, China, presented at 21st International Conference on Composite Materials, Xi'an, China, 20 August 2017 - 25 August 2017, http://www.iccm-central.org/Proceedings/ICCM21proceedings/papers/4669.pdf
    Conference Papers | 2017
    Oromiehie E; prusty G; rajan G; wanigasekara C; Swain A, 2017, 'Machine learning based process monitoring and characterisation of automated composites', in Machine learning based process monitoring and characterisation of automated composites, Seattle, United States, presented at SAMPE, Seattle, United States, 22 May 2017 - 25 May 2017
    Conference Papers | 2016
    Oromiehie E; Compston P; Prusty ; Rajan G, 2016, 'Optical fiber Bragg grating sensors for process monitoring in advanced composites', in SAS 2016 - Sensors Applications Symposium, Proceedings, Catania, Italy, presented at The International Sensors Applications Symposium (SAS), Catania, Italy, 20 April 2016 - 22 April 2016, http://dx.doi.org/10.1109/SAS.2016.7479849
    Conference Papers | 2016
    Oromiehie E; Prusty BG; Compston P; Rajan G, 2016, 'Identification of defect in the automated tape placement process using fiber Bragg grating sensors', in ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
    Conference Papers | 2016
    Oromiehie E; Prusty G; Compston P; Rajan G, 2016, 'Identification of defect in the automated tape placement process using fibre bragg grating sensors', in ECCM 16, Munich, Germany, presented at 17th European Conference on Composite Materials (ECCM 17), Munich, Germany, 26 June 2016 - 30 June 2016
    Conference Papers | 2015
    Oromiehie E; Prusty G, 2015, 'Structural Health Monitoring and Processing of Composites using Photonic Sensing Technology', in Thomsen OT (ed.), ICCS20 Proceedings, Copenhagen, Denmark, presented at 20th International Conference on Composite Materials, Copenhagen, Denmark, 19 July 2015 - 24 July 2015, http://iccm20.org/fullpapers/file?f=MEg3lQynnx
    Conference Abstracts | 2015
    Oromiehie E; Rajan G; Compston P; Prusty G, (ed.), 2015, 'On-line monitoring of composite Lay-up process in the Automated Tape Placement method using optical fibre Bragg grating sensor', in On-line monitoring of composite Lay-up process in the Automated Tape Placement method using optical fibre Bragg grating sensor, Montreal, Canada, presented at The Second International Symposium on Automated Composites Manufacturing, Montreal, Canada, 23 April 2015 - 24 April 2015
    Conference Papers | 2014
    Oromiehie E; Oromiehie E; Rajan G; Compston P; Prusty G, 2014, 'Performance characterization of sandwich composite laminates embedded with fiber Bragg grating sensors', in KINGSTON J (ed.), The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8, Melbourne, presented at 8th Australasian Congress on Applied Mechanics (ACAM 8), Melbourne, 23 November 2014 - 26 November 2014