Dr Hongxu Wang
Lecturer

Dr Hongxu Wang

UNSW Canberra
School of Engineering & IT
Phone
+61 2 5114 5217
Location
Office: 227 Bldg 16, Lab: G06/07 Bldg 26 School of Engineering and Information Technology UNSW Canberra The University of New South Wales
  • Book Chapters | 2022
    2022, 'Shock response of polymer composites', in Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition, Elsevier, pp. 309 - 336, http://dx.doi.org/10.1016/B978-0-12-823979-7.00012-0
    Book Chapters | 2021
    2021, 'Compressive Properties of Additively Manufactured Titanium-Carbide', in Characterization of Minerals, Metals, and Materials 2021, pp. 297 - 307, http://dx.doi.org/10.1007/978-3-030-65493-1_29
  • Journal articles | 2023
    Siddique SH; Hazell PJ; Pereira GG; Wang H; Escobedo JP; Ameri AAH, 2023, 'On the Mechanical Behaviour of Biomimetic Cornstalk-Inspired Lightweight Structures', Biomimetics, 8, pp. 92 - 92, http://dx.doi.org/10.3390/biomimetics8010092
    Journal articles | 2023
    2023, 'A newly proposed damage constitutive model for composite laminates under low-velocity impact by considering through-thickness compression damage', Aerospace Science and Technology, 137, pp. 108267 - 108267, http://dx.doi.org/10.1016/j.ast.2023.108267
    Journal articles | 2023
    2023, 'Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations', Defence Technology, 22, pp. 37 - 53, http://dx.doi.org/10.1016/j.dt.2022.08.009
    Journal articles | 2023
    2023, 'Improved ballistic performance of a continuous-gradient B4C/Al composite inspired by nacre', Materials Science and Engineering A, 874, pp. 145071 - 145071, http://dx.doi.org/10.1016/j.msea.2023.145071
    Journal articles | 2023
    2023, 'In-Plane and Oblique Edge-on Impact on Thick Glass-Fibre/Epoxy Composite Laminates', International Journal of Impact Engineering, 171, pp. 104373 - 104373, http://dx.doi.org/10.1016/j.ijimpeng.2022.104373
    Journal articles | 2022
    2022, 'Development of a Coated Fabric Armour System of Aramid Fibre and Rubber', Thin-Walled Structures, 179, pp. 109679 - 109679, http://dx.doi.org/10.1016/j.tws.2022.109679
    Journal articles | 2022
    2022, 'Dynamic behaviour of Bio-inspired heterocyclic aramid Fibre-reinforced laminates subjected to Low-velocity Drop-weight impact', Composites Part A: Applied Science and Manufacturing, 153, pp. 106733 - 106733, http://dx.doi.org/10.1016/j.compositesa.2021.106733
    Journal articles | 2022
    2022, 'Dynamic failure behavior of steel wire mesh subjected to medium velocity impact: Experiments and simulations', International Journal of Mechanical Sciences, 216, pp. 106991 - 106991, http://dx.doi.org/10.1016/j.ijmecsci.2021.106991
    Journal articles | 2022
    2022, 'Establishing the lower thresholds for water sterilisation with shock waves and hot gas bubbles from the detonation of explosives in water', Water Resources and Industry, 28, pp. 100187 - 100187, http://dx.doi.org/10.1016/j.wri.2022.100187
    Journal articles | 2022
    2022, 'From biology to biomimicry: Using nature to build better structures – A review', Construction and Building Materials, 320, http://dx.doi.org/10.1016/j.conbuildmat.2021.126195
    Journal articles | 2022
    2022, 'High-velocity projectile impact response of rubber-coated aramid Twaron fabrics', International Journal of Mechanical Sciences, 229, pp. 107515 - 107515, http://dx.doi.org/10.1016/j.ijmecsci.2022.107515
    Journal articles | 2022
    2022, 'Impact damage behavior of lightweight CFRP protection suspender on railway vehicles', Materials and Design, 213, pp. 110332 - 110332, http://dx.doi.org/10.1016/j.matdes.2021.110332
    Journal articles | 2022
    2022, 'Impact resistance and yarn pull-out behaviour of polymer spray-coated UHMWPE fabrics', Materials Today Communications, 33, pp. 104473 - 104473, http://dx.doi.org/10.1016/j.mtcomm.2022.104473
    Journal articles | 2022
    2022, 'Lessons from nature: 3D printed bio-inspired porous structures for impact energy absorption – A review', Additive Manufacturing, 58, pp. 103051 - 103051, http://dx.doi.org/10.1016/j.addma.2022.103051
    Journal articles | 2022
    2022, 'Quasi-static response of horse hoof inspired biomimetic structures', Materials Today: Proceedings, 59, pp. 1168 - 1173, http://dx.doi.org/10.1016/j.matpr.2022.03.185
    Journal articles | 2022
    2022, 'Spall strength dependence on peak stress and deformation history in Lean Duplex Stainless Steel 2101', Materials Science and Engineering A, 831, http://dx.doi.org/10.1016/j.msea.2021.142158
    Journal articles | 2021
    2021, 'Biomimetic armour design strategies for additive manufacturing: A review', Materials and Design, 205, pp. 109730 - 109730, http://dx.doi.org/10.1016/j.matdes.2021.109730
    Journal articles | 2021
    2021, 'Effects of impactor mass on the low-velocity impact behaviour of thick GFRP pultruded laminates', Construction and Building Materials, 279, pp. 122491 - 122491, http://dx.doi.org/10.1016/j.conbuildmat.2021.122491
    Journal articles | 2021
    2021, 'Ferrite phase transformation in dual-phase steel under shock loading', Materials Science and Engineering A, 802, pp. 140690 - 140690, http://dx.doi.org/10.1016/j.msea.2020.140690
    Journal articles | 2021
    2021, 'Homogenized shell element-based modeling of low-velocity impact response of stainless-steel wire mesh', Mechanics of Advanced Materials and Structures, 28, pp. 1932 - 1947, http://dx.doi.org/10.1080/15376494.2020.1716415
    Journal articles | 2021
    2021, 'Insights into the high-velocity impact behaviour of bio-inspired composite laminates with helicoidal lay-ups', Polymer Testing, 103, pp. 107348 - 107348, http://dx.doi.org/10.1016/j.polymertesting.2021.107348
    Journal articles | 2021
    2021, 'Numerical investigation of Fibonacci series based bio-inspired laminates under impact loading', Composite Structures, 255, pp. 112985 - 112985, http://dx.doi.org/10.1016/j.compstruct.2020.112985
    Journal articles | 2021
    2021, 'On the impact response of UHMWPE woven fabrics: Experiments and simulations', International Journal of Mechanical Sciences, 204, pp. 106574 - 106574, http://dx.doi.org/10.1016/j.ijmecsci.2021.106574
    Journal articles | 2021
    2021, 'On the improvement of the ballistic performance of a silicon carbide tile through pre-stress: Experiments and simulations', International Journal of Impact Engineering, 151, pp. 103836 - 103836, http://dx.doi.org/10.1016/j.ijimpeng.2021.103836
    Journal articles | 2021
    2021, 'On the mechanical behaviour of steel wire mesh subjected to low-velocity impact', Thin-Walled Structures, 159, pp. 107281 - 107281, http://dx.doi.org/10.1016/j.tws.2020.107281
    Journal articles | 2021
    2021, 'On the structural parameters of honeycomb-core sandwich panels against low-velocity impact', Composites Part B: Engineering, 216, pp. 108881 - 108881, http://dx.doi.org/10.1016/j.compositesb.2021.108881
    Journal articles | 2021
    2021, 'Progressive damage modeling and optimization of fibrous composites under ballistic impact loading', Mechanics of Advanced Materials and Structures, 28, pp. 1227 - 1244, http://dx.doi.org/10.1080/15376494.2019.1655688
    Journal articles | 2021
    2021, 'Stress propagation and debonding effects in impedance-graded multi-metallic systems under impact loading', International Journal of Protective Structures, 12, pp. 3 - 21, http://dx.doi.org/10.1177/2041419620917709
    Journal articles | 2021
    2021, 'Vibration-based detection of skin-stiffener debonding on composite stiffened panels using surrogate-assisted algorithms', Composite Structures, 270, pp. 114090 - 114090, http://dx.doi.org/10.1016/j.compstruct.2021.114090
    Journal articles | 2020
    2020, 'Experimental investigation on the dynamic flow behaviour and structure-property correlation of dual-phase high carbon steel at elevated temperatures', Materials Science and Engineering A, 771, pp. 138655 - 138655, http://dx.doi.org/10.1016/j.msea.2019.138655
    Journal articles | 2020
    2020, 'Experimental study on the deformation and of parallel bamboo Strand Lumber under drop-weight penetration impact', Construction and Building Materials, 242, pp. 118135 - 118135, http://dx.doi.org/10.1016/j.conbuildmat.2020.118135
    Journal articles | 2020
    2020, 'Experimental, numerical and analytical study on the shock wave propagation through impedance-graded multi-metallic systems', International Journal of Mechanical Sciences, 178, pp. 105621 - 105621, http://dx.doi.org/10.1016/j.ijmecsci.2020.105621
    Journal articles | 2020
    2020, 'Rheological and energy absorption characteristics of a concentrated shear thickening fluid at various temperatures', International Journal of Impact Engineering, 139, pp. 103525 - 103525, http://dx.doi.org/10.1016/j.ijimpeng.2020.103525
    Journal articles | 2020
    2020, 'Tensile properties of ultra-high-molecular-weight polyethylene single yarns at different strain rates', Journal of Composite Materials, 54, pp. 1453 - 1466, http://dx.doi.org/10.1177/0021998319883416
    Journal articles | 2019
    2019, 'An experimental investigation on Parallel Bamboo Strand Lumber specimens under quasi static and impact loading', Construction and Building Materials, 228, http://dx.doi.org/10.1016/j.conbuildmat.2019.116724
    Journal articles | 2019
    2019, 'Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels', Composite Structures, 226, http://dx.doi.org/10.1016/j.compstruct.2019.111284
    Journal articles | 2018
    Ramakrishnan KR; Wang H; Shankar K; Fien A, 2018, 'A new method for the measurement and analysis of biomechanical energy delivered by kicking', Sports Engineering, 21, pp. 53 - 62, http://dx.doi.org/10.1007/s12283-017-0244-z
    Journal articles | 2018
    Sun G; Chen D; Wang H; Hazell PJ; Li Q, 2018, 'High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations', International Journal of Impact Engineering, 122, pp. 119 - 136, http://dx.doi.org/10.1016/j.ijimpeng.2018.08.007
    Journal articles | 2018
    2018, 'Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores', Materials and Design, 160, pp. 1117 - 1136, http://dx.doi.org/10.1016/j.matdes.2018.10.047
    Journal articles | 2017
    Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP; Wang C, 2017, 'Effects of fabric folding and thickness on the impact behaviour of multi-ply UHMWPE woven fabrics', Journal of Materials Science, 52, pp. 13977 - 13991, http://dx.doi.org/10.1007/s10853-017-1482-y
    Journal articles | 2017
    Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, 2017, 'Impact behaviour of Dyneema® fabric-reinforced composites with different resin matrices', Polymer Testing, 61, pp. 17 - 26, http://dx.doi.org/10.1016/j.polymertesting.2017.04.026
    Journal articles | 2016
    Wang H; Ramakrishnan KR; Shankar K, 2016, 'Experimental study of the medium velocity impact response of sandwich panels with different cores', Materials and Design, 99, pp. 68 - 82, http://dx.doi.org/10.1016/j.matdes.2016.03.048
  • Conference Papers | 2023
    2023, 'Improving Impact Resistance of Plain-Woven Ultra-High Molecular Weight Polyethylene Fabrics', in Lecture Notes in Civil Engineering, Springer Nature Singapore, pp. 549 - 559, http://dx.doi.org/10.1007/978-981-19-2886-4_39
    Preprints | 2023
    2023, Dynamic Mechanical Response and Fracture Behaviour of Ti-Ni-C Composites Fabricated by Directed Energy Deposition, , http://dx.doi.org/10.2139/ssrn.4395096
    Conference Papers | 2022
    2022, 'Low-velocity impact behaviours of AFP manufactured fibre metal laminate structures', in Materials Today: Proceedings, Elsevier BV, pp. 421 - 429, http://dx.doi.org/10.1016/j.matpr.2021.11.362
    Conference Papers | 2021
    2021, 'Analysis of AFP manufactured fibre metal laminate structures under impact loading', Online, presented at ACAM10: 10th Australasian Congress on Applied Mechanics, Online, 29 November 2021, https://search.informit.org/doi/epdf/10.3316/informit.321692581209141
    Conference Papers | 2021
    2021, 'Effects of Impactor Geometry on Pultruded Composites Under Low-Velocity Impact Loading', Istanbul, Turkey, presented at 10th International Conference on FRP Composites in Civil Engineering, Istanbul, Turkey, 08 December 2021 - 10 December 2021, http://dx.doi.org/10.1007/978-3-030-88166-5_69
    Conference Papers | 2020
    2020, 'Effect of peak stress and deformation history on the dynamic tensile behavior of a dual phase steel', in AIP Conference Proceedings, AIP Publishing, presented at SHOCK COMPRESSION OF CONDENSED MATTER - 2019: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, http://dx.doi.org/10.1063/12.0000820
    Conference Papers | 2020
    2020, 'Spall fracture of two high strength armor steels', in AIP Conference Proceedings, AIP Publishing, presented at SHOCK COMPRESSION OF CONDENSED MATTER - 2019: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, http://dx.doi.org/10.1063/12.0001024
    Conference Papers | 2019
    2019, 'Compressive behaviour of carbon fibre reinforced thermoplastic lattice structures', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Cape Town, South Africa, presented at 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02 September 2019 - 04 September 2019, http://dx.doi.org/10.1201/9780429426506
    Conference Papers | 2019
    2019, 'Compressive behaviour of carbon fibre reinforced thermoplastic lattice structures', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Taylor & Francis, pp. 480 - 485, http://dx.doi.org/10.1201/9780429426506-85
    Conference Papers | 2019
    2019, 'Effects of Impactor Mass and Impact Velocity on the Damage Induced in Carbon Fibre Reinforced Laminates', in Aerospace Structures Impact Dynamics International Conference, Madrid, Spain, presented at ASIDIC2019, Madrid, Spain, 04 June 2019 - 07 June 2019, http://asidiconference.org/
    Conference Papers | 2019
    2019, 'Effects of impactor mass on pultruded profiles subjected to low-velocity impacts', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Cape Town, South Africa, presented at 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02 September 2019 - 04 September 2019, http://dx.doi.org/10.1201/9780429426506
    Conference Papers | 2019
    2019, 'Experimental investigation and mesoscale modelling of textile composites under high-velocity impact', Melbourne, Australia, presented at 22nd International Conference on Composite Materials, Melbourne, Australia, 11 August 2019 - 16 August 2019
    Conference Papers | 2019
    2019, 'Stress wave propagation through an impedance-graded multi-material system', in 13th International Conference on Shock and Impact Loads on Structures, SILOS 2019, pp. 197 - 199
    Conference Papers | 2017
    Austin S; Brown AD; Escobedo JP; Wang H; Kleine H; Hazell PJ, 2017, 'The high-velocity impact of Dyneema® and Spectra® laminates: Implementation of a simple thermal softening model', in Procedia Engineering, pp. 51 - 58, http://dx.doi.org/10.1016/j.proeng.2017.09.725
    Conference Papers | 2015
    Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, 2015, 'Tensile Properties of UHMWPE single yarn at different strain rates', in Araújo AL; Correia JR; Soares CMM (eds.), Tensile Properties of UHMWPE single yarn at different strain rates, 10th International Conference on Composite Science and Technology, Lisbon, Portugal, presented at 10th International Conference on Composite Science and Technology, Lisbon, Portugal, 02 September 2015 - 04 September 2015, http://www.dem.ist.utl.pt/iccst10/files/ICCST10_Proceedings/pdf/WEB_PAPERS/ICCST10_Upload_91.pdf
    Conference Papers | 2015
    2015, 'The effectiveness of combined gripping method in tensile testing of UHMWPE single yarn', in IOP Conference Series: Materials Science and Engineering, IOP Publishing, pp. 012109 - 012109, http://dx.doi.org/10.1088/1757-899X/87/1/012109
    Conference Papers | 2014
    Ramakrishnan KR; Wang H; Shankar K; Fien A, 2014, 'Measurement of biomechanical energy delivered through kicking', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 614 - 621
    Conference Papers | 2014
    Wang H; Hazell PJ; Shankar K, 2014, 'Numerical simulation of ballistic impact on woven CFRP laminate', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 1021 - 1029
    Conference Papers | 2014
    2014, 'A numerical study on through-thickness shock response of CFRP composite', Newcastle, Australia, presented at Composites Australia and CRC-ACS Conference 2014: Materials for a Lighter and Smarter World, Newcastle, Australia, 07 April 2014 - 09 April 2014

I am serving as a guest editor of a special issue on “Dynamic Behavior of Polymer Composite Materials and Structures” (https://www.mdpi.com/journal/polymers/special_issues/polymer_composite_structure_dynamic) in Polymers (an Open Access Journal by MDPI, Impact Factor of 4.967, JCR - Q1 (Polymer Science) / CiteScore - Q1 (Polymers and Plastics)). It’s my pleasure to invite you to contribute to this special issue. The submission deadline is 30 June 2023. Please also circulate the special issue information to your friends and collaborators who are working in this field. Thank you very much.

My Teaching

ZEIT4014 Impact Dynamics

ZEIT4006 Structural Integrity Assessment