Emeritus Professor Jun Wang
Emeritus Professor

Emeritus Professor Jun Wang

Engineering
Mechanical and Manufacturing Engineering

Emeritus Professor Jun Wang is with the School of Mechanical & Manufacturing Engineering

(***NO longer take new research students***)

Professor Jun Wang received a Bachelor’s degree in Mechanical Manufacturing Engineering from Dalian University of Technology in 1982 and a PhD in Mechanical & Manufacturing Engineering from the University of Melbourne in 1993. He has been a member of the academic staff in the Ocean University of China (1982-1988), the University of Melbourne (1993-1995), Queensland University of Technology (1995-2005) and UNSW (Feb 2005-Dec 2020). He is now an Emeritus Professor of UNSW. He is a fellow and CPEng of the Institution of Engineers Australia and a fellow of the International Society of Nanomanufacturing, and has served as the Chairman of the International Committee for Abrasive Technology (2011-2015), President of the Ausinan Science and Technology Society (2013-2015) and a member of the Mechanical College Board of The Institution of Engineers Australia (2013-2020). He has also been actively engaged in the profession by serving as the Editor-in-Chief or an Associate Editor for 6 international journals and chairing/co-chairing 25 international conferences between 1999 and 2019.

To December 2020, Professor Wang has had over 500 publications, including more than 360 refereed journal articles, 27 edited books and conference proceedings, a single-authored monograph and four book chapters.

Phone
+61 2 9385 5784
Location
Kensington Campus
  • Book Chapters | 2010
    Ali Y; Wang J, 2010, 'Impact Abrasive Machining', in Jackson MJ; Davim JP (ed.), Machining with Abrasives, Springer, NY Dordrecht Heidelberg London, pp. 385 - 419, http://dx.doi.org/10.1007/978-1-4419-7302-3_9
  • Journal articles | 2022
    Gu Y; Nguyen T; Donough MJ; Gangadhara Prusty B; Wang J, 2022, 'Mechanisms of pop-up delamination in laminated composites pierced by the initial pure waterjet in abrasive waterjet machining', Composite Structures, vol. 297, http://dx.doi.org/10.1016/j.compstruct.2022.115968
    Journal articles | 2022
    Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2022, 'Prediction of tool wear width size and optimization of cutting parameters in milling process using novel ANFIS-PSO method', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 236, pp. 111 - 122, http://dx.doi.org/10.1177/0954405420935262
    Journal articles | 2021
    Chen Y; Wang J; An Q, 2021, 'Mechanisms and predictive force models for machining with rake face textured cutting tools under orthogonal cutting conditions', International Journal of Mechanical Sciences, vol. 195, http://dx.doi.org/10.1016/j.ijmecsci.2020.106246
    Journal articles | 2021
    Gao T; Li C; Yang M; Zhang Y; Jia D; Ding W; Debnath S; Yu T; Said Z; Wang J, 2021, 'Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant', Journal of Materials Processing Technology, vol. 290, http://dx.doi.org/10.1016/j.jmatprotec.2020.116976
    Journal articles | 2021
    Liu D; Huang C; Wang J; Zhu H, 2021, 'Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach', Ceramics International, vol. 47, pp. 15165 - 15172, http://dx.doi.org/10.1016/j.ceramint.2021.02.076
    Journal articles | 2021
    Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case based reasoning method and its application in estimation of surface quality toward intelligent machining', Journal of Intelligent Manufacturing, vol. 32, pp. 313 - 327, http://dx.doi.org/10.1007/s10845-020-01573-2
    Journal articles | 2021
    Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2021, 'Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining', Journal of Intelligent Manufacturing, vol. 32, pp. 77 - 90, http://dx.doi.org/10.1007/s10845-020-01559-0
    Journal articles | 2021
    Xu L; Huang C; Niu J; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case-based reasoning method and its application to predict machining performance', Soft Computing, vol. 25, pp. 5683 - 5697, http://dx.doi.org/10.1007/s00500-020-05564-6
    Journal articles | 2021
    Xu LH; Huang CZ; Niu JH; Wang J; Liu HL; Wang XD, 2021, 'Prediction of cutting power and surface quality, and optimization of cutting parameters using new inference system in high-speed milling process', Advances in Manufacturing, vol. 9, pp. 388 - 402, http://dx.doi.org/10.1007/s40436-020-00339-6
    Journal articles | 2021
    Zhang P; Huang C; Zhu H; Wang J; Yao Y; Yao P, 2021, 'The research of tool wear criterion in micro cutting using the elastic recovery ratio of high-strength elastic alloy 3J33B', International Journal of Advanced Manufacturing Technology, vol. 114, pp. 1767 - 1776, http://dx.doi.org/10.1007/s00170-021-06937-3
    Journal articles | 2021
    Zhang R; Huang C; Wang J; Feng S; Zhu H, 2021, 'Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation', Materials Science in Semiconductor Processing, vol. 121, http://dx.doi.org/10.1016/j.mssp.2020.105299
    Journal articles | 2020
    Abbas CA; Huang C; Wang J; Wang Z; Liu H; Zhu H, 2020, 'Machinability investigations on high-speed drilling of aluminum reinforced with silicon carbide metal matrix composites', International Journal of Advanced Manufacturing Technology, vol. 108, pp. 1601 - 1611, http://dx.doi.org/10.1007/s00170-020-05409-4
    Journal articles | 2020
    Feng S; Zhang R; Huang C; Wang J; Jia Z; Wang J, 2020, 'An investigation of recast behavior in laser ablation of 4H-silicon carbide wafer', Materials Science in Semiconductor Processing, vol. 105, http://dx.doi.org/10.1016/j.mssp.2019.104701
    Journal articles | 2020
    Liu D; Nguyen T; Wang J; Huang C, 2020, 'Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance', International Journal of Machine Tools and Manufacture, vol. 151, http://dx.doi.org/10.1016/j.ijmachtools.2020.103528
    Journal articles | 2020
    Niu J; Huang C; Li C; Zou B; Xu L; Wang J; Liu Z, 2020, 'A comprehensive method for selecting cutting tool materials', International Journal of Advanced Manufacturing Technology, vol. 110, pp. 229 - 240, http://dx.doi.org/10.1007/s00170-020-05534-0
    Journal articles | 2020
    Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'A novel intelligent reasoning system to estimate energy consumption and optimize cutting parameters toward sustainable machining', Journal of Cleaner Production, vol. 261, http://dx.doi.org/10.1016/j.jclepro.2020.121160
    Journal articles | 2020
    Yang F; Liu D; Deng Y; Wang J; Mei S; Ge S; Li H; Zhang C; Zhang T, 2020, 'Frequent promoter methylation of HOXD10 in endometrial carcinoma and its pathological significance', ONCOLOGY LETTERS, vol. 19, pp. 3602 - 3608, http://dx.doi.org/10.3892/ol.2020.11467
    Journal articles | 2020
    Yun H; Zou B; Wang J; Huang C; Xing H; Shi Z; Xue K, 2020, 'Design and fabrication of graded cBN tool materials through high temperature high pressure method', Journal of Alloys and Compounds, vol. 832, pp. 154937 - 154937, http://dx.doi.org/10.1016/j.jallcom.2020.154937
    Journal articles | 2020
    Zhang C; Zhu H; Jiang Z; Huang C; Wang J, 2020, 'Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter', Materials Science in Semiconductor Processing, vol. 105, http://dx.doi.org/10.1016/j.mssp.2019.104746
    Journal articles | 2020
    Zhang Z; Yao P; Li X; Wang J; Huang C; Zhu H; Zou B; Liu H, 2020, 'Grinding performance and tribological behavior in solid lubricant assisted grinding of glass-ceramics', Journal of Manufacturing Processes, vol. 51, pp. 31 - 43, http://dx.doi.org/10.1016/j.jmapro.2020.01.020
    Journal articles | 2020
    Zhao B; Liu H; Wang J; Huang C; Zhu H; Liu X, 2020, 'Influence of novel sintering process on the densification and microstructures of ceramic composite materials', Ceramics International, vol. 46, pp. 6733 - 6737, http://dx.doi.org/10.1016/j.ceramint.2019.11.162
    Journal articles | 2019
    Chen Y; Wang J; Chen M, 2019, 'Enhancing the machining performance by cutting tool surface modifications: a focused review', Machining Science and Technology, vol. 23, pp. 477 - 509, http://dx.doi.org/10.1080/10910344.2019.1575412
    Journal articles | 2019
    Deng Y; Han Q; Mei S; Li H; Yang F; Wang J; Ge S; Jing X; Xu H; Zhang T, 2019, 'Cyclin-dependent kinase subunit 2 overexpression promotes tumor progression and predicts poor prognosis in uterine leiomyosarcoma', ONCOLOGY LETTERS, vol. 18, pp. 2845 - 2852, http://dx.doi.org/10.3892/ol.2019.10668
    Journal articles | 2019
    Feng S; Huang C; Wang J; Jia Z, 2019, 'Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining', Materials Science in Semiconductor Processing, vol. 93, pp. 238 - 251, http://dx.doi.org/10.1016/j.mssp.2018.12.037
    Journal articles | 2019
    Jia Y; Qi Y; Wang Y; Ma X; Xu Y; Wang J; Zhang X; Gao M; Cong B; Han S, 2019, 'Overexpression of CD59 inhibits apoptosis of T-acute lymphoblastic leukemia via AKT/Notch1 signaling pathway', CANCER CELL INTERNATIONAL, vol. 19, http://dx.doi.org/10.1186/s12935-018-0714-9
    Journal articles | 2019
    Nguyen T; Wang J, 2019, 'A review on the erosion mechanisms in abrasive waterjet micromachining of brittle materials', International Journal of Extreme Manufacturing, vol. 1, pp. 012006 - 012006, http://dx.doi.org/10.1088/2631-7990/ab1028
    Journal articles | 2019
    Niu J; Huang C; Su R; Zou B; Wang J; Liu Z; Li C, 2019, 'Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic tools', International Journal of Advanced Manufacturing Technology, vol. 103, pp. 4123 - 4134, http://dx.doi.org/10.1007/s00170-019-03592-7
    Journal articles | 2019
    Thongkaew K; Wang J; Yeoh G, 2019, 'Impact characteristics and stagnation formation on a solid surface by a supersonic abrasive waterjet', International Journal of Extreme Manufacturing, http://dx.doi.org/10.1088/2631-7990/ab531c
    Journal articles | 2019
    Wang Z; Huang C; Wang J; Wang P; Bi S; Abbas CA, 2019, 'Design and Simulation of Flow Field for Bone Tissue Engineering Scaffold Based on Triply Periodic Minimal Surface', Chinese Journal of Mechanical Engineering (English Edition), vol. 32, http://dx.doi.org/10.1186/s10033-019-0329-7
    Journal articles | 2019
    Xu L; Huang C; Su R; Zhu H; Liu H; Liu Y; Li C; Wang J, 2019, 'Estimation of tool life and cutting burr in high speed milling of the compacted graphite iron by de based adaptive neuro-fuzzy inference system', Mechanical Sciences, vol. 10, pp. 243 - 254, http://dx.doi.org/10.5194/ms-10-243-2019
    Journal articles | 2019
    Yang M; Li C; Zhang Y; Jia D; Li R; Hou Y; Cao H; Wang J, 2019, 'Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions', Ceramics International, vol. 45, pp. 14908 - 14920, http://dx.doi.org/10.1016/j.ceramint.2019.04.226
    Journal articles | 2019
    Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'Investigation on chip formation and surface integrity in micro end milling of maraging steel', International Journal of Advanced Manufacturing Technology, vol. 102, pp. 1973 - 1984, http://dx.doi.org/10.1007/s00170-018-03219-3
    Journal articles | 2019
    Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel', International Journal of Advanced Manufacturing Technology, vol. 104, pp. 585 - 598, http://dx.doi.org/10.1007/s00170-019-03911-y
    Journal articles | 2019
    Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P; Wang X, 2019, 'Determination of the minimum chip thickness and the effect of the plowing depth on the residual stress field in micro-cutting of 18 Ni maraging steel', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-019-04439-x
    Journal articles | 2019
    Yun H; Zou B; Wang J; Huang C; Li S, 2019, 'Optimization of energy consumption in coating removal for recycling scrap coated cemented carbide tools using hybrid laser-waterjet', Journal of Cleaner Production, vol. 229, pp. 104 - 114, http://dx.doi.org/10.1016/j.jclepro.2019.04.315
    Journal articles | 2019
    Zhang Z; Yao P; HAUNG C; Wang J; XUE D; DENG W; Zhang Z, 2019, 'Investigation and modeling of microgrooves generated on diamond grinding wheel by abrasive waterjet based on Box–Behnken experimental design', The International Journal of Advanced Manufacturing Technology, vol. 100, pp. 321 - 332, http://dx.doi.org/10.1007/s00170-018-2749-4
    Journal articles | 2019
    Zhang Z; Yao P; Wang J; Huang C; Cai R; Zhu H, 2019, 'Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material', International Journal of Mechanical Sciences, vol. 157-158, pp. 243 - 253, http://dx.doi.org/10.1016/j.ijmecsci.2019.04.047
    Journal articles | 2019
    Zhang Z; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B, 2019, 'Nanomechanical characterization of RB-SiC ceramics based on nanoindentation and modelling of the ground surface roughness', Ceramics International, vol. 46, http://dx.doi.org/10.1016/j.ceramint.2019.11.094
    Journal articles | 2019
    Zhao B; Liu H; Huang C; Wang J; Wang B; Hou Y, 2019, 'Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718', International Journal of Advanced Manufacturing Technology, vol. 102, pp. 3431 - 3438, http://dx.doi.org/10.1007/s00170-019-03386-x
    Journal articles | 2018
    Bai X; Huang C; Wang J; Zou B; Liu H, 2018, 'Sintering mechanisms of Al2O3-based composite ceramic tools having 25% Si3N4 additions', International Journal of Refractory Metals and Hard Materials, vol. 73, pp. 132 - 138, http://dx.doi.org/10.1016/j.ijrmhm.2018.01.010
    Journal articles | 2018
    Chen Y; Li H; Hou L; Wang J; Bu X, 2018, 'An intelligent chatter detection method based on EEMD and feature selection with multi-channel vibration signals', Measurement: Journal of the International Measurement Confederation, vol. 127, pp. 356 - 365, http://dx.doi.org/10.1016/j.measurement.2018.06.006
    Journal articles | 2018
    Feng S; Huang C; Wang J; Zhu H, 2018, 'Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process', Materials Science in Semiconductor Processing, vol. 82, pp. 112 - 125, http://dx.doi.org/10.1016/j.mssp.2018.03.035
    Journal articles | 2018
    Li H; Wang J; Kwok N; Nguyen T; Yeoh GH, 2018, 'A study of the micro-hole geometry evolution on glass by abrasive air-jet micromachining', Journal of Manufacturing Processes, vol. 31, pp. 156 - 161, http://dx.doi.org/10.1016/j.jmapro.2017.11.013
    Journal articles | 2018
    Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2018, 'Crack-healing behavior of Al2O3-TiB2-TiSi2ceramic material', Ceramics International, vol. 44, pp. 2132 - 2137, http://dx.doi.org/10.1016/j.ceramint.2017.10.164
    Journal articles | 2018
    Nguyen T; Liu D; Thongkaew K; Li H; Qi H; Wang J, 2018, 'The wear mechanisms of reaction bonded silicon carbide under abrasive polishing and slurry jet impact conditions', Wear, vol. 410-411, pp. 156 - 164, http://dx.doi.org/10.1016/j.wear.2018.06.001
    Journal articles | 2018
    Wang J; Xu M-Q; Jiang X-L; Mei X-Y; Liu X-G, 2018, 'Histone deacetylase inhibitor SAHA-induced epithelial-mesenchymal transition by upregulating Slug in lung cancer cells', ANTI-CANCER DRUGS, vol. 29, pp. 80 - 88, http://dx.doi.org/10.1097/CAD.0000000000000573
    Journal articles | 2018
    Wang L; Huang C; Wang J; Zhu H; Liang X, 2018, 'An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics', Ceramics International, vol. 44, pp. 5636 - 5645, http://dx.doi.org/10.1016/j.ceramint.2017.12.211
    Journal articles | 2018
    Wang X; Huang C; Zou B; Liu G; Zhu H; Wang J, 2018, 'Experimental study of surface integrity and fatigue life in the face milling of Inconel 718', FRONTIERS OF MECHANICAL ENGINEERING, vol. 13, pp. 243 - 250, http://dx.doi.org/10.1007/s11465-018-0479-9
    Journal articles | 2018
    Wang Y; Li C; Zhang Y; Yang M; Li BK; Dong L; Wang J, 2018, 'Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials', International Journal of Precision Engineering and Manufacturing - Green Technology, vol. 5, pp. 327 - 339, http://dx.doi.org/10.1007/s40684-018-0035-4
    Journal articles | 2018
    Zhang R; Huang C; Wang J; Zhu H; Yao P; Feng S, 2018, 'Micromachining of 4H-SiC using femtosecond laser', Ceramics International, vol. 44, pp. 17775 - 17783, http://dx.doi.org/10.1016/j.ceramint.2018.06.245
    Journal articles | 2018
    Zhao B; Liu H; Huang C; Wang J; Cheng M; Zhan Q, 2018, 'Evolution mechanisms of high temperature mechanical properties and microstructures of Al2O3/SiCw/TiCnnanocomposite materials', Journal of Alloys and Compounds, vol. 737, pp. 46 - 52, http://dx.doi.org/10.1016/j.jallcom.2017.12.100
    Journal articles | 2018
    Zhu H; Yao P; Wang J, 2018, 'A study of hybrid laser-waterjet micromachining of crystalline germanium', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 232, pp. 1903 - 1917, http://dx.doi.org/10.1177/0954405416654189
    Journal articles | 2017
    Feng S; Huang C; Wang J; Zhu H; Yao P; Liu Z, 2017, 'An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining', Precision Engineering, vol. 47, pp. 33 - 45, http://dx.doi.org/10.1016/j.precisioneng.2016.07.002
    Journal articles | 2017
    Feng S; Huang CZ; Wang J; Zhu HT, 2017, 'Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology', Materials Science in Semiconductor Processing, vol. 68, pp. 199 - 212, http://dx.doi.org/10.1016/j.mssp.2017.05.029
    Journal articles | 2017
    Jing X; Li H; Wang J; Yuan Y; Zhang D; Kwok N; Nguyen T, 2017, 'An investigation of surface roughness in micro-end-milling of metals', Australian Journal of Mechanical Engineering, vol. 15, pp. 166 - 174, http://dx.doi.org/10.1080/14484846.2016.1211472
    Journal articles | 2017
    Li L; Wang J, 2017, 'Direct writing of large-area micro/nano-structural arrays on single crystalline germanium substrates using femtosecond lasers', Applied Physics Letters, vol. 110, pp. 251901 - 251901, http://dx.doi.org/10.1063/1.4986784
    Journal articles | 2017
    Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2017, 'Mechanical properties and microstructure of Al2O3-TiB2-TiSi2ceramic tool material', Ceramics International, vol. 43, pp. 14192 - 14199, http://dx.doi.org/10.1016/j.ceramint.2017.07.162
    Journal articles | 2017
    Wang RJ; Wang CY; Wen W; Wang J, 2017, 'Experimental study on a micro-abrasive slurry jet for glass polishing', International Journal of Advanced Manufacturing Technology, vol. 89, pp. 451 - 462, http://dx.doi.org/10.1007/s00170-016-9109-z
    Journal articles | 2017
    Wang W; Yao P; Wang J; Huang C; Kuriyagawa T; Zhu H; Zou B; Liu H, 2017, 'Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching', Ceramics International, vol. 43, pp. 10726 - 10736, http://dx.doi.org/10.1016/j.ceramint.2017.05.054
    Journal articles | 2017
    Wang W; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B; Liu Y, 2017, 'Controlled material removal mode and depth of micro cracks in precision grinding of fused silica - A theoretical model and experimental verification', Ceramics International, vol. 43, pp. 11596 - 11609, http://dx.doi.org/10.1016/j.ceramint.2017.05.327
    Journal articles | 2017
    Wei X; Nie S; Liu H; Sun J; Liu J; Li J; Li S; Wang S; Han S; Wang J; Sun Y, 2017, 'Angiopoietin-like protein 2 facilitates non-small cell lung cancer progression by promoting the polarization of M2 tumor-associated macrophages', AMERICAN JOURNAL OF CANCER RESEARCH, vol. 7, pp. 2220 - 2233, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000416813100011&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
    Journal articles | 2017
    Yang M; Li C; Zhang Y; Jia D; Zhang X; Hou Y; Li R; Wang J, 2017, 'Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions', International Journal of Machine Tools and Manufacture, vol. 122, pp. 55 - 65, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.003
    Journal articles | 2017
    Yun H; Zou B; Wang J, 2017, 'Effects of sintering temperature and nano Ti(C,N) on the microstructure and mechanical properties of Ti(C,N) cermets cutting tool materials with low Ni-Co', Materials Science and Engineering A, vol. 705, pp. 98 - 104, http://dx.doi.org/10.1016/j.msea.2017.08.033
    Journal articles | 2017
    Zhang Y; Li C; Ji H; Yang X; Yang M; Jia D; Zhang X; Li R; Wang J, 2017, 'Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms', International Journal of Machine Tools and Manufacture, vol. 122, pp. 81 - 97, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.002
    Journal articles | 2017
    Zhao B; Liu H; Huang C; Wang J; Cheng M, 2017, 'Theoretical hardness analysis and experimental verification for composite ceramic tool materials', Ceramics International, vol. 43, pp. 15580 - 15585, http://dx.doi.org/10.1016/j.ceramint.2017.08.112
    Journal articles | 2017
    Zhao B; Liu H; Huang CZ; Wang J; Cheng M, 2017, 'Fabrication and mechanical properties of Al 2 O 3 -SiC w -TiC np ceramic tool material', Ceramics International, vol. 43, pp. 10224 - 10230, http://dx.doi.org/10.1016/j.ceramint.2017.05.049
    Journal articles | 2017
    Zhu H; Wang J; Yao P; Huang C, 2017, 'Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium', International Journal of Machine Tools and Manufacture, vol. 116, pp. 25 - 39, http://dx.doi.org/10.1016/j.ijmachtools.2017.01.002
    Journal articles | 2016
    Huang C; Zou B; Guo P; Liu Y; Huang C; Wang J, 2016, 'Sliding behavior and wear mechanism of iron and cobalt-based high-temperature alloys against WC and SiC balls', International Journal of Refractory Metals and Hard Materials, vol. 59, pp. 40 - 55, http://dx.doi.org/10.1016/j.ijrmhm.2016.05.007
    Journal articles | 2016
    Ji W; Zou B; Huang C; Wang J; Xu K; Liu Y; Huang C, 2016, 'Effects of heating rate and metal binder on the microstructure and mechanical properties of self-diffusion gradient cermet composite tool materials', Journal of Alloys and Compounds, vol. 677, pp. 190 - 203, http://dx.doi.org/10.1016/j.jallcom.2016.03.237
    Journal articles | 2016
    Li W; Zhu H; Wang J; Huang C, 2016, 'Radial-mode abrasive waterjet turning of short carbon–fiber-reinforced plastics', Machining Science and Technology, vol. 20, pp. 231 - 248, http://dx.doi.org/10.1080/10910344.2016.1165836
    Journal articles | 2016
    Liu D; Zhu H; Huang C; Wang J; Yao P, 2016, 'Prediction model of depth of penetration for alumina ceramics turned by abrasive waterjet—finite element method and experimental study', International Journal of Advanced Manufacturing Technology, vol. 87, pp. 2673 - 2682, http://dx.doi.org/10.1007/s00170-016-8600-x
    Journal articles | 2016
    Liu G; Zou B; Huang C; Wang X; Wang J; Liu Z, 2016, 'Tool damage and its effect on the machined surface roughness in high-speed face milling the 17-4PH stainless steel', The International Journal of Advanced Manufacturing Technology, vol. 83, pp. 257 - 264, http://dx.doi.org/10.1007/s00170-015-7564-6
    Journal articles | 2016
    Lv Z; Huang C; Zhu H; Wang J; Hou R, 2016, 'A 3D simulation of the fluid field at the jet impinging zone in ultrasonic-assisted abrasive waterjet polishing', The International Journal of Advanced Manufacturing Technology, vol. 87, pp. 3091 - 3103, http://dx.doi.org/10.1007/s00170-016-8722-1
    Journal articles | 2016
    Qi H; Fan J; Wang J; Li H, 2016, 'On the erosion process on quartz crystals by the impact of multiple high-velocity micro-particles', Tribology International, vol. 95, pp. 462 - 474, http://dx.doi.org/10.1016/j.triboint.2015.12.003
    Journal articles | 2016
    Wang W; Yao P; Wang J; Huang C; Zhu H; Zou B; Liu H; Yan J, 2016, 'Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions', International Journal of Machine Tools and Manufacture, vol. 109, pp. 126 - 136, http://dx.doi.org/10.1016/j.ijmachtools.2016.07.007
    Journal articles | 2016
    Wang X; Huang C; Wang J; Zou B; Liu G; Liu H, 2016, 'Finite element simulation of the cutting process for Inconel 718 alloy using a new material constitutive model', Key Engineering Materials, vol. 693, pp. 1046 - 1053, http://dx.doi.org/10.4028/www.scientific.net/KEM.693.1046
    Journal articles | 2016
    Xu K; Zou B; Wang Y; Guo P; Huang C; Wang J, 2016, 'An experimental investigation of micro-machinability of aluminum alloy 2024 using Ti(C7N3)-based cermet micro end-mill tools', Journal of Materials Processing Technology, vol. 235, pp. 13 - 27, http://dx.doi.org/10.1016/j.jmatprotec.2016.04.011
    Journal articles | 2015
    Bai X; Huang C; Wang J; Zou B; Liu H, 2015, 'Fabrication and characterization of Si3N4 reinforced Al2O3-based ceramic tool materials', Ceramics International, vol. 41, pp. 12798 - 12804, http://dx.doi.org/10.1016/j.ceramint.2015.06.115
    Journal articles | 2015
    Chen Y; Li H; Wang J, 2015, 'Analytical modelling of cutting forces in near-orthogonal cutting of titanium alloy Ti6Al4V', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 229, pp. 1122 - 1133, http://dx.doi.org/10.1177/0954406214542967
    Journal articles | 2015
    Chen Y; Li H; Wang J, 2015, 'Further development of oxleys predictive force model for orthogonal cutting', Machining Science and Technology, vol. 19, pp. 86 - 111, http://dx.doi.org/10.1080/10910344.2014.991026
    Journal articles | 2015
    Li H; Wang J, 2015, 'An experimental study of abrasive waterjet machining of Ti-6Al-4V', International Journal of Advanced Manufacturing Technology, vol. 81, pp. 361 - 369, http://dx.doi.org/10.1007/s00170-015-7245-5
    Journal articles | 2015
    Liu H; Chai Y; Huang C; Liu H; Wang J, 2015, 'Effect of boron nitride nanotubes content on mechanical properties and microstructure of Ti(C,N)-based cermets', Ceramics International, vol. 41, pp. 2813 - 2818, http://dx.doi.org/10.1016/j.ceramint.2014.10.101
    Journal articles | 2015
    Lv Z; Huang C; Zhu H; Wang J; Wang Y; Yao P, 2015, 'A research on ultrasonic-assisted abrasive waterjet polishing of hard-brittle materials', The International Journal of Advanced Manufacturing Technology, vol. 78, pp. 1361 - 1369, http://dx.doi.org/10.1007/s00170-014-6528-6
    Journal articles | 2015
    Lv Z; Huang C; Zhu H; Wang J; Yao P; Liu Z, 2015, 'FEM analysis on the abrasive erosion process in ultrasonic-assisted abrasive waterjet machining', The International Journal of Advanced Manufacturing Technology, vol. 78, pp. 1641 - 1649, http://dx.doi.org/10.1007/s00170-014-6768-5
    Journal articles | 2015
    Nguyen T; Wang J; Li W, 2015, 'Process models for controlled-depth abrasive waterjet milling of amorphous glasses', International Journal of Advanced Manufacturing Technology, vol. 77, pp. 1177 - 1189, http://dx.doi.org/10.1007/s00170-014-6514-z
    Journal articles | 2015
    Qi H; Fan J; Wang J, 2015, 'A study of the micro-machining process on quartz crystals using an abrasive slurry jet', Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, vol. 229, pp. 421 - 434, http://dx.doi.org/10.1177/0954405414528167
    Journal articles | 2015
    Qi H; Fan J; Wang J; Li HUAIZHONG, 2015, 'Impact erosion by high velocity micro-particles on a quartz crystal', Tribology International, vol. 82, pp. 200 - 210, http://dx.doi.org/10.1016/j.triboint.2014.10.016
    Journal articles | 2015
    Wu Q; Wang J; Li H, 2015, 'Temperature evolution and material removal mechanisms in nanosecond pulsed laser ablation of polycrystalline diamond', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 229, pp. 1357 - 1372, http://dx.doi.org/10.1177/0954405414535773
    Journal articles | 2015
    Zou B; Zhou H; Huang C; Xu K; Wang J, 2015, 'Tool damage and machined-surface quality using hot-pressed sintering Ti(C7N3)/WC/TaC cermet cutting inserts for high-speed turning stainless steels', The International Journal of Advanced Manufacturing Technology, vol. 79, pp. 197 - 210, http://dx.doi.org/10.1007/s00170-015-6823-x
    Journal articles | 2014
    Jing X; Li H; Wang J; Tian Y, 2014, 'Modelling the cutting forces in micro-end-milling using a hybrid approach', International Journal of Advanced Manufacturing Technology, vol. 73, pp. 1647 - 1656, http://dx.doi.org/10.1007/s00170-014-5953-x
    Journal articles | 2014
    Li H; Jing X; Wang J, 2014, 'Detection and analysis of chatter occurrence in micro-milling process', Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, vol. 228, pp. 1359 - 1371, http://dx.doi.org/10.1177/0954405414522216
    Journal articles | 2014
    Li H; Lee A; Fan J; Yeoh GH; Wang J, 2014, 'On DEM-CFD study of the dynamic characteristics of high speed micro-abrasive air jet', Powder Technology, vol. 267, pp. 161 - 179, http://dx.doi.org/10.1016/j.powtec.2014.07.018
    Journal articles | 2014
    Li W; Wang J; Zhu H; Huang C, 2014, 'On ultrahigh velocity micro-particle impact on steels - A multiple impact study', Wear, vol. 309, pp. 52 - 64, http://dx.doi.org/10.1016/j.wear.2013.10.011
    Journal articles | 2014
    Li W; Zhu H; Wang J; Huang C, 2014, 'A Surface Roughness Model in Radial-Mode Abrasive Waterjet Turning for High-Tensile Steels', Applied Mechanics and Materials, vol. 483, pp. 177 - 181, http://dx.doi.org/10.4028/www.scientific.net/AMM.483.177
    Journal articles | 2014
    Nguyen T; Wang J; Li W, 2014, 'Process models for controlled-depth abrasive waterjet milling of amorphous glasses', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-014-6514-z
    Journal articles | 2014
    Song J; Huang C; Lv M; Zou B; Liu H; Wang J, 2014, 'Cutting performance and failure mechanisms of TiB2-based ceramic cutting tools in machining hardened Cr12MoV mold steel', International Journal of Advanced Manufacturing Technology, vol. 70, pp. 495 - 500, http://dx.doi.org/10.1007/s00170-013-5296-z
    Journal articles | 2014
    Song J; Huang C; Lv M; Zou B; Wang S; Wang J; An J, 2014, 'Effects of TiC content and melt phase on microstructure and mechanical properties of ternary TiB2-based ceramic cutting tool materials', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, vol. 605, pp. 137 - 143, http://dx.doi.org/10.1016/j.msea.2014.03.036
    Journal articles | 2014
    Tangwarodomnukun V; Wang J; Huang C; Zhu H, 2014, 'Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates', International Journal of Machine Tools and Manufacture, vol. 79, pp. 1 - 16, http://dx.doi.org/10.1016/j.ijmachtools.2013.12.003
    Journal articles | 2014
    Wang X; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'A new method to evaluate the machinability of difficult-to-cut materials', The International Journal of Advanced Manufacturing Technology, vol. 75, pp. 91 - 96, http://dx.doi.org/10.1007/s00170-014-6126-7
    Journal articles | 2014
    Wang XY; Wang J; Xu WJ; Guo DM, 2014, 'Scanning path planning for laser bending of straight tube into curve tube', Optics and Laser Technology, vol. 56, pp. 43 - 51, http://dx.doi.org/10.1016/j.optlastec.2013.07.001
    Journal articles | 2014
    Wang Y; Zhu H; Huang C; Wang J; Yao P; Zhang Z, 2014, 'A Study on Erosion of Alumina Wafer in Abrasive Water Jet Machining', Advanced Materials Research, vol. 1017, pp. 228 - 233, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.228
    Journal articles | 2014
    Wu Q; Wang J; Huang C, 2014, 'Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 228, pp. 903 - 917, http://dx.doi.org/10.1177/0954405413510290
    Journal articles | 2014
    Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2014, 'Study on the synthesis and growth mechanisms of the refractory ZrC whiskers', International Journal of Refractory Metals and Hard Materials, vol. 42, pp. 116 - 119, http://dx.doi.org/10.1016/j.ijrmhm.2013.08.011
    Journal articles | 2014
    Xu X; Li X; Ye X; Liu G; Wang J; Peng Z; Liang T; Yang W; Hao X, 2014, 'Chemical ablation therapy of recurrent mediastinal nodal metastasis in post-radiotherapy cancer patients', MEDICAL ONCOLOGY, vol. 31, http://dx.doi.org/10.1007/s12032-014-0224-0
    Journal articles | 2014
    Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'Dynamic fatigue behavior of Al2O3/TiC micro-nano-composite ceramic tool materials at ambient and high temperatures', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, vol. 593, pp. 64 - 69, http://dx.doi.org/10.1016/j.msea.2013.11.035
    Journal articles | 2014
    Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'Effects of particulate metallic phase on microstructure and mechanical properties of carbide reinforced alumina ceramic tool materials', Ceramics International, vol. 40, pp. 2809 - 2817, http://dx.doi.org/10.1016/j.ceramint.2013.10.033
    Journal articles | 2014
    Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'A study on in-situ synthesis of TiB2-SiC ceramic composites by reactive hot pressing', Ceramics International, vol. 40, pp. 2305 - 2313, http://dx.doi.org/10.1016/j.ceramint.2013.07.152
    Journal articles | 2014
    Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'Microstructure and mechanical properties of TiB2-SiC ceramic composites by Reactive Hot Pressing', International Journal of Refractory Metals and Hard Materials, vol. 42, pp. 36 - 41, http://dx.doi.org/10.1016/j.ijrmhm.2013.10.007
    Journal articles | 2014
    Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'Microstructure and mechanical properties of hot pressed TiB2-SiC composite ceramic tool materials at room and elevated temperatures', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, vol. 606, pp. 108 - 116, http://dx.doi.org/10.1016/j.msea.2014.03.084
    Journal articles | 2014
    Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effects of metal phases and carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets cutting tool materials', Materials Science and Engineering: A, vol. 618, pp. 462 - 470, http://dx.doi.org/10.1016/j.msea.2014.09.052
    Journal articles | 2014
    Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effects of sintering processes on the mechanical properties and microstructure of Ti(C,N)-based cermet cutting tool materials', International Journal of Refractory Metals and Hard Materials, vol. 47, pp. 71 - 79, http://dx.doi.org/10.1016/j.ijrmhm.2014.06.023
    Journal articles | 2014
    Zou B; Ji W; Huang C; Wang J; Li S; Xu K, 2014, 'Effects of superfine refractory carbide additives on microstructure and mechanical properties of TiB2-TiC+Al2O3 composite ceramic cutting tool materials', Journal of Alloys and Compounds, vol. 585, pp. 192 - 202, http://dx.doi.org/10.1016/j.jallcom.2013.09.119
    Journal articles | 2014
    Zou B; Zhou H; Xu K; Huang C; Wang J; Li S, 2014, 'Study of a hot-pressed sintering preparation of Ti(C7N 3)-based composite cermets materials and their performance as cutting tools', Journal of Alloys and Compounds, vol. 611, pp. 363 - 371, http://dx.doi.org/10.1016/j.jallcom.2014.05.150
    Journal articles | 2014
    Zou C; Huang C; Zou B; Fei Y; Liu H; Zhu H; Wang J, 2014, 'Establishment of the low defect ceramic cutting tool database', Key Engineering Materials, vol. 589-590, pp. 357 - 360, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.357
    Journal articles | 2013
    Ali MA; Fan JM; Zhu HT; Wang J, 2013, 'A visualization study of the radial-mode abrasive waterjet turning process for alumina ceramics', Advanced Materials Research, vol. 797, pp. 9 - 14, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.9
    Journal articles | 2013
    Fan J; Wang J, 2013, 'A visualization study of abrasive flow variation in abrasive air jets', Advanced Materials Research, vol. 652-654, pp. 2123 - 2128, http://dx.doi.org/10.4028/www.scientific.net/AMR.652-654.2123
    Journal articles | 2013
    Fan J; Wang J, 2013, 'Kerf profile characteristics in abrasive air jet micromachining', Advanced Materials Research, vol. 797, pp. 33 - 38, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.33
    Journal articles | 2013
    Fan J; Wang J, 2013, 'Micro-channel fabrication on quartz crystals by a micro abrasive air jet', Advanced Materials Research, vol. 652-654, pp. 2159 - 2163, http://dx.doi.org/10.4028/www.scientific.net/AMR.652-654.2159
    Journal articles | 2013
    Li H; Wang J, 2013, 'Assessment of Cutting Forces in High-speed Milling of Inconel 718 Considering the Dynamic Effects', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, pp. 1581 - 1595, http://dx.doi.org/10.1177/0954405413489968
    Journal articles | 2013
    Li HZ; Wang J, 2013, 'A cutting forces model for milling Inconel 718 alloy based on a material constitutive law', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 227, pp. 1761 - 1775, http://dx.doi.org/10.1177/0954406212469167
    Journal articles | 2013
    Li W; Wang J; Ali YM; Zhu H; Huang C, 2013, 'An investigation into the radial-mode abrasive waterjet turning process on high tensile steels', International Journal of Mechanical Sciences, vol. 77, pp. 365 - 376, http://dx.doi.org/10.1016/j.ijmecsci.2013.05.005
    Journal articles | 2013
    Li WY; Wang J; Li H; Zhu H; Huang C, 2013, 'On ultrahigh velocity micro-particle impact on steels-A single impact study', Wear, vol. 305, pp. 216 - 227, http://dx.doi.org/10.1016/j.wear.2013.06.011
    Journal articles | 2013
    Li ZQ; Wang J; Sun T, 2013, 'Atomistic Simulations of Ultrashort Pulsed Laser Ablation of Polycrystalline Diamond', Current Nanoscience, vol. 9, pp. 804 - 811, http://dx.doi.org/10.2174/157341371130900098
    Journal articles | 2013
    Manickam S; Wang J; Huang C, 2013, 'Laser-material interaction and grooving performance in ultrafast laser ablation of crystalline germanium under ambient conditions', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, pp. 1709 - 1718, http://dx.doi.org/10.1177/0954405413492322
    Journal articles | 2013
    Qi H; Fan JM; Wang J, 2013, 'Impact erosion of quartz crystals by micro-particles in abrasive waterjet micro-machining', Advanced Materials Research, vol. 797, pp. 46 - 51, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.46
    Journal articles | 2013
    Tangwarodomnukun V; Wang J, 2013, 'Optimization of hybrid laser-waterjet micromachining of silicon', Advanced Materials Research, vol. 797, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.3
    Journal articles | 2013
    Wang X; Huang C; Zou B; Liu H; Wang J, 2013, 'Effects of geometric structure of twist drill bits and cutting condition on tool life in drilling 42CrMo ultrahigh-strength steel', International Journal of Advanced Manufacturing Technology, vol. 64, pp. 41 - 47, http://dx.doi.org/10.1007/s00170-012-4026-2
    Journal articles | 2013
    Wang XY; Luo YH; Wang J; Xu WJ; Guo DM, 2013, 'Scanning path planning for laser bending of straight tube into coil-shape tube', The International Journal of Advanced Manufacturing Technology, vol. 69, pp. 909 - 917, http://dx.doi.org/10.1007/s00170-013-5107-6
    Journal articles | 2013
    Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2013, 'In situ synthesis of ZrB2-ZrCx ceramic tool materials toughened by elongated ZrB2 grains', Materials & Design, vol. 49, pp. 226 - 233, http://dx.doi.org/10.1016/j.matdes.2013.01.062
    Journal articles | 2013
    Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2013, 'Study on in-situ synthesis of ZrB2 whiskers in ZrB 2-ZrC matrix powder for ceramic cutting tools', International Journal of Refractory Metals and Hard Materials, vol. 37, pp. 98 - 105, http://dx.doi.org/10.1016/j.ijrmhm.2012.11.001
    Journal articles | 2013
    Yao P; Wei W; Huang CZ; Wang J; Zhu HT; Kuriyagawa T, 2013, 'Indentation crack initiation and ductile to brittle transition behavior of fused silica', Advanced Materials Research, vol. 797, pp. 667 - 672, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.667
    Journal articles | 2013
    Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'High temperature mechanical properties of Al2O3/TiC micro-nano-composite ceramic tool materials', Ceramics International, vol. 39, pp. 8877 - 8883, http://dx.doi.org/10.1016/j.ceramint.2013.04.081
    Journal articles | 2013
    Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'Preparation and characterization of Al2O3/TiC micro-nano-composite ceramic tool materials', Ceramics International, vol. 39, pp. 4253 - 4262, http://dx.doi.org/10.1016/j.ceramint.2012.10.277
    Journal articles | 2013
    Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'Study of the mechanical properties, strengthening and toughening mechanisms of Al2O3/TiC micro-nano-composite ceramic tool material', Materials Science and Engineering: A, vol. 577, pp. 9 - 15, http://dx.doi.org/10.1016/j.msea.2013.04.033
    Journal articles | 2013
    Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2013, 'Preparation of in-situ growth TaC whiskers toughening Al2O 3 ceramic matrix composite', International Journal of Refractory Metals and Hard Materials, vol. 36, pp. 122 - 125, http://dx.doi.org/10.1016/j.ijrmhm.2012.08.003
    Journal articles | 2012
    Jing X; Li H; Wang J; Liow J, 2012, 'An experimental study of cutting forces in micro end-milling', Advanced Materials Research, vol. 500, pp. 357 - 362, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.357
    Journal articles | 2012
    Keivan D; Nguyen T; Wang J, 2012, 'Mechanisms of channel formation on glasses by abrasive waterjet milling', Wear, vol. 292-293, pp. 1 - 10, http://dx.doi.org/10.1016/j.wear.2012.06.008
    Journal articles | 2012
    Li H; Wang J, 2012, 'A study of cutting forces in high-speed dry milling of Inconel 718', Advanced Materials Research, vol. 500, pp. 105 - 110, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.105
    Journal articles | 2012
    Li Q; Huang CZ; Wang J; Zhu H, 2012, 'A Study on the Cross-sectional Shape of Kerf Cut with Micro Abrasive Air Jet', Advanced Materials Research, vol. 500, pp. 236 - 241, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.236
    Journal articles | 2012
    Li WY; Wang J; Ali Y, 2012, 'An Experimental Study of Radial-Mode Abrasive Waterjet Turning of Steels', Materials Science Forum, vol. 697-698, pp. 166 - 170, http://dx.doi.org/10.4028/www.scientific.net/MSF.697-698.166
    Journal articles | 2012
    Li Z; Wang J; Wu Q, 2012, 'Molecular dynamics simulation of the ablation process in ultrashort pulsed laser machining of polycrystalline diamond', Advanced Materials Research, vol. 500, pp. 351 - 356, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.351
    Journal articles | 2012
    Li Z; Wang J; Wu Q, 2012, 'Ultrashort pulsed laser micromachining of polycrystalline diamond', Advanced Materials Research, vol. 497, pp. 220 - 224, http://dx.doi.org/10.4028/www.scientific.net/AMR.497.220
    Journal articles | 2012
    Pang K; Nguyen T; Fan J; Wang J, 2012, 'Modelling of the micro-channelling process on glasses using an abrasive slurry jet', International Journal of Machine Tools and Manufacture, vol. 53, pp. 118 - 126, http://dx.doi.org/10.1016/j.ijmachtools.2011.10.005
    Journal articles | 2012
    Pang K; Nguyen T; Fan JM; Wang J, 2012, 'A study of micro-channeling on glasses using an abrasive slurry jet', Machining Science and Technology, vol. 16, pp. 547 - 563, http://dx.doi.org/10.1080/10910344.2012.731947
    Journal articles | 2012
    Qi H; Fan J; Wang J, 2012, 'An Experimental Study of the Abrasive Water jet Micro-Machining Process for Quartz Crystals', Advanced Materials Research, vol. 565, pp. 339 - 344, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.339
    Journal articles | 2012
    Song JP; Huang CZ; Zou B; Liu HL; Li L; Wang J, 2012, 'Effects of sintering additives on microstructure and mechanical properties of TiB2–WC ceramic–metal composite tool materials', International Journal of Refractory Metals and Hard Materials, vol. 30, pp. 91 - 95, http://dx.doi.org/10.1016/j.ijrmhm.2011.07.008
    Journal articles | 2012
    Song JP; Huang CZ; Zou B; Liu HL; Wang J, 2012, 'Microstructure and mechanical properties of TiB2¡VTiC¡VWC composite ceramic tool materials', Materials and Design, vol. 36, pp. 69 - 74, http://dx.doi.org/10.1016/j.matdes.2011.11.011
    Journal articles | 2012
    Tangwarodonmukun V; Wang J; Huang CZ; Zhu H, 2012, 'An investigation of hybrid laser–waterjet ablation of silicon substrates', International Journal of Machine Tools and Manufacture, vol. 56, pp. 39 - 49, http://dx.doi.org/10.1016/j.ijmachtools.2012.01.002
    Journal articles | 2012
    Wu B; Li H; Wang J; Jing X, 2012, 'An Experimental Study of the Effect of Cutting Parameters on Micro Milling Process', Advanced Materials Research, vol. 565, pp. 558 - 563, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.558
    Journal articles | 2012
    Yao P; Huang CZ; Wang J; Kuriyagawa T, 2012, 'Thermal Analysis of Multi-Pass Laser Irradiation on Fused Silica', Advanced Materials Research, vol. 565, pp. 621 - 626, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.621
    Journal articles | 2012
    Yun C; Li H; Wang J, 2012, 'Cutting forces and tool wear in dry milling of Ti6A14V', Advanced Materials Research, vol. 565, pp. 454 - 459, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.454
    Journal articles | 2012
    Zhou TT; Huang CZ; Liu H; Wang J; Zou B; Zhu HT, 2012, 'Crack propagation simulation in microstructure of ceramic tool materials', Computational Materials Science, vol. 54, pp. 150 - 156, http://dx.doi.org/10.1016/j.commatsci.2011.10.039
    Journal articles | 2011
    Che CL; Huang CZ; Wang J; Zhu HT, 2011, 'Study of Abrasive Water Jet Polishing Technology', Key Engineering Materials, vol. 487, pp. 327 - 331, http://dx.doi.org/10.4028/www.scientific.net/KEM.487.327
    Journal articles | 2011
    Dadkhahipour K; Wang J, 2011, 'A Study of Material Removal Process in Abrasive Waterjet Milling', Advanced Materials Research, vol. 325, pp. 621 - 626, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.621
    Journal articles | 2011
    Fan J; Fan CM; Wang J, 2011, 'Flow Dynamic Simulation of Micro Abrasive Water Jet', Advanced Materials Research, vol. 175, pp. 171 - 176, http://dx.doi.org/10.4028/www.scientific.net/SSP.175.171
    Journal articles | 2011
    Fan JM; Li H; Wang J; Wang C, 2011, 'A study of the flow characteristics in micro-abrasive jets', Experimental Thermal and Fluid Science, vol. 35, pp. 1097 - 1106, http://dx.doi.org/10.1016/j.expthermflusci.2011.03.004
    Journal articles | 2011
    Hao S; Huang CZ; Zou B; Wang J; Liu HL; Zhu HT, 2011, 'Three dimensional simulation of microstructure evolution for ceramic tool materials', Computational Materials Science, vol. 50, pp. 3334 - 3341, http://dx.doi.org/10.1016/j.commatsci.2011.06.025
    Journal articles | 2011
    Luo W; Wang C; Wang J; Song Y, 2011, 'A study of jet formation for premixed slurry jet nozzle using the discrete phase model', Advanced Materials Research, vol. 325, pp. 638 - 644, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.6r38
    Journal articles | 2011
    Luo W; Wang C; Wang J; Song YX, 2011, 'A study of jet formation for premixed slurry jet nozzle using the discrete phase model', Advanced Materials Research, vol. 325, pp. 638 - 644, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.638
    Journal articles | 2011
    Luo WS; Wang C; Wang J; Song YX, 2011, 'The development of micro abrasive waterjet machining technology', Advanced Materials Research, vol. 188, pp. 733 - 738, http://dx.doi.org/10.4028/www.scientific.net/AMR.188.733
    Journal articles | 2011
    Wan DP; Wang J; Mathew P, 2011, 'Energy deposition and non-thermal ablation in femtosecond laser grooving of silicon', Machining Science and Technology, vol. 15, pp. 263 - 283, http://dx.doi.org/10.1080/10910344.2011.595324
    Journal articles | 2011
    Wang J; Moridi farimani A; Mathew P, 2011, 'Micro-grooving on quartz crystals by an abrasive air jet', Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, vol. 225, pp. 2161 - 2173, http://dx.doi.org/10.1177/0954406211410260
    Journal articles | 2011
    Wang J; Zhang Q; Mathew P, 2011, 'Optimization of cutting conditions in drilling operations with plane rake faced twist drills', Machining Science and Technology, vol. 15, pp. 91 - 109, http://dx.doi.org/10.1080/10910344.2011.557971
    Journal articles | 2011
    Wang XY; Kang RK; Xu WJ; Guo D; Wang J, 2011, 'A threshold model for laser cleaning of larger silicon wafers', Machining Science and Technology, vol. 15, pp. 415 - 428, http://dx.doi.org/10.1080/10910344.2011.620914
    Journal articles | 2011
    Wang XY; Wang J; Wang LJ; Xu W; Guo D, 2011, 'Scanning Path Planning in Laser Bending of Tube Based on Curvature', Advanced Materials Research, vol. 264-265, pp. 6 - 11, http://dx.doi.org/10.4028/www.scientific.net/AMR.264-265.6
    Journal articles | 2011
    Wu Q; Wang J, 2011, 'An Experimental Investigation of the Laser Milling Process for Polycrystalline Diamonds', Advanced Materials Research, vol. 291-294, pp. 810 - 815, http://dx.doi.org/10.4028/www.scientific.net/AMR.291-294.810
    Journal articles | 2011
    Zhu H; Huang CZ; Zhang SG; Wang J; Che CL, 2011, 'Experimental Research on the Surface Roughness of Metal Kerf by Abrasive Waterjet Cutting', Advanced Materials Research, vol. 325, pp. 627 - 632, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.627
    Journal articles | 2010
    Ali Y; Mathew P; Wang J, 2010, 'Progress in the modeling of abrasive jet machining', Advanced Materials Research, vol. 126-128, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.3
    Journal articles | 2010
    Basak AK; Fan J; Wang J; Mathew P, 2010, 'Material removal mechanisms of monocrystalline silicon under the impact of high velocity micro-particles', Wear, vol. 269, pp. 269 - 277, http://dx.doi.org/10.1016/j.wear.2010.04.006
    Journal articles | 2010
    Fan J; Fan CM; Wang J, 2010, 'Modeling the material removal rate in micro abrasive water jet machining of glasses', Advanced Materials Research, vol. 135, pp. 370 - 375, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.370
    Journal articles | 2010
    Feng Y; Huang CZ; Wang J, 2010, 'A study on the surface microstructural integrity of ceramics milled with abrasive waterjet', Advanced Materials Research, vol. 135, pp. 64 - 68, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.64
    Journal articles | 2010
    Feng Y; Huang CZ; Wang J; Zhu H, 2010, 'A study on the abrasive waterjet milling mechanisms of ceramic materials', Key Engineering Materials, vol. 431-432, pp. 261 - 264, http://dx.doi.org/10.4028/www.scientific.net/KEM.431-432.261
    Journal articles | 2010
    He L; Sun LM; Zhao XF; Wang J, 2010, 'Effect of grinding wheel diameter change on geometrical parameters of ball-nose end mill', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 97-101, pp. 4527 - 4529, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4527
    Journal articles | 2010
    He L; Zhao XF; Shi HY; Wang J, 2010, 'Research and development of four axis linkage grinding simulation system of ball-nose end mill', Key Engineering Materials, vol. 443, pp. 314 - 317, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.314
    Journal articles | 2010
    Li QL; Huang CZ; Wang J; Zhu H; Liu Z, 2010, 'An experimental study on the kerf characteristics of silicon cut with micro abrasive air jet', Advanced Materials Research, vol. 135, pp. 13 - 17, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.13
    Journal articles | 2010
    Li QL; Huang CZ; Wang J; Zhu H; Liu Z, 2010, 'Analysis and modeling of micro abrasive air jet cutting aspect ratio', Advanced Materials Research, vol. 126-128, pp. 35 - 40, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.35
    Journal articles | 2010
    Liu Z; Huang CZ; Wang J; Zhu H; Li QL, 2010, 'Study on machining system of precision micro abrasive water jet and polishing experiment', Key Engineering Materials, vol. 431-432, pp. 102 - 105, http://dx.doi.org/10.4028/www.scientific.net/KEM.431-432.102
    Journal articles | 2010
    Moridi farimani A; Wang J; Ali Y; Mathew P; Li X, 2010, 'A study of abrasive jet micro-grooving of quartz crystals', Key Engineering Materials, vol. 443, pp. 645 - 651, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.645
    Journal articles | 2010
    Pang K; Nguyen T; Fan F; Wang J, 2010, 'Machining of micro-channels on brittle glass using an abrasive slurry jet', Key Engineering Materials, vol. 443, pp. 639 - 644, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.639
    Journal articles | 2010
    Tangwarodonmukun V; Wang J; Mathew P, 2010, 'A comparison of dry and underwater laser micromachining of silicon substrates', Key Engineering Materials, vol. 443, pp. 693 - 698, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.693
    Journal articles | 2010
    Wan DP; Mathew P; Wang J, 2010, 'Thermal effect analysis of femtosecond laser scribing of silicon', Key Engineering Materials, vol. 443, pp. 687 - 692, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.687
    Journal articles | 2010
    Wang J, 2010, 'Depth of cut models for multipass abrasive waterjet cutting of alumina ceramics with nozzle oscillation', Frontiers of Mechanical Engineering in China, vol. 5, pp. 19 - 32, http://dx.doi.org/10.1007/s11465-009-0082-1
    Journal articles | 2010
    Wang X; Wang J, 2010, 'Laser 3D machining with variable process parameters', AIP Conference Proceedings, vol. 1315, pp. 1157 - 1162, http://dx.doi.org/10.1063/1.3552337
    Journal articles | 2010
    Wang XY; Kang RK; Xu WJ; Guo DM; Wang J, 2010, 'Laser cleaning of fine particles on si-wafers', AIP Conference Proceedings, vol. 1315, pp. 1588 - 1593, http://dx.doi.org/10.1063/1.3552416
    Journal articles | 2010
    Wang XY; Xu WJ; Wang L; Wang J; Liang Y, 2010, 'Heat Absorbing Rate in Laser Drilling of YG8 Alloy', Advanced Materials Research, vol. 97-101, pp. 4164 - 4167, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4164
    Journal articles | 2010
    Wu Q; Wang J, 2010, 'Development in laser polishing of polycrystalline diamond tools', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 135, pp. 1 - 6, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.1
    Journal articles | 2010
    Zhang Q; Wang J, 2010, 'Geometry, specification and drilling performance of a plane rake faced drill point design', Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, vol. 224, pp. 369 - 378, http://dx.doi.org/10.1243/09544062JMES1767
    Journal articles | 2010
    Zhu H; Huang CZ; Wang J; Liu Z; Zhang SG, 2010, 'Erosion Mechanism of Ultrasonic Vibration Abrasive Waterjet in Micro Machining', Key Engineering Materials, vol. 443, pp. 675 - 680, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.675
    Journal articles | 2009
    Fan JM; Wang CY; Wang J, 2009, 'Modelling the erosion rate in micro abrasive air jet machining of glasses', Wear, vol. 266, pp. 968 - 974, http://dx.doi.org/10.1016/j.wear.2008.12.019
    Journal articles | 2009
    Li H; Wang J; Fan J, 2009, 'Analysis and modelling of particle velocities in micro-abrasive air jet', International Journal of Machine Tools and Manufacture, vol. 49, pp. 850 - 858, http://dx.doi.org/10.1016/j.ijmachtools.2009.05.012
    Journal articles | 2009
    Nguyen T; Pang K; Wang J, 2009, 'A preliminary study of the erosion process in micro-machining of glasses with a low pressure slurry jet.', Key Engineering Materials, vol. 389-390, pp. 375 - 380, http://dx.doi.org/10.4028/www.scientific.net/KEM.389-390.375
    Journal articles | 2009
    Qiu YF; Wang CY; Wang J; Song YX, 2009, 'Masked and unmasked machining of glass by micro abrasive jet', Advanced Materials Research, vol. 69-70, pp. 182 - 186, http://dx.doi.org/10.4028/www.scientific.net/AMR.69-70.182
    Journal articles | 2009
    Tangwarodonmukun V; Wang J, 2009, 'Laser micromachining of silicon substrates', Advanced Materials Research, vol. 76-78, pp. 416 - 421, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.416
    Journal articles | 2009
    Wang J, 2009, 'A focused review on enhancing the abrasive waterjet cutting performance by using controlled nozzle oscillation', Key Engineering Materials, vol. 404, pp. 33 - 44, http://dx.doi.org/10.4028/3-908454-05-0.33
    Journal articles | 2009
    Wang J, 2009, 'A new model for predicting the depth of cut in abrasive waterjet contouring of alumina ceramics', Journal of Materials Processing Technology, vol. 209, pp. 2314 - 2320, http://dx.doi.org/10.1016/j.jmatprotec.2008.05.021
    Journal articles | 2009
    Wang J, 2009, 'Particle velocity models for ultra-high pressure abrasive waterjets', Journal of Materials Processing Technology, vol. 209, pp. 4573 - 4577, http://dx.doi.org/10.1016/j.jmatprotec.2008.10.021
    Journal articles | 2009
    Wang J; Nguyen T; Pang K, 2009, 'Mechanisms of microhole formation on glasses by an abrasive slurry jet', Journal of Applied Physics, vol. 105, pp. 1 - 4, http://dx.doi.org/10.1063/1.3079802
    Journal articles | 2009
    Wang J; Shanmugam DK, 2009, 'Cutting meat with bone using an ultrahigh pressure abrasive waterjet', Meat Science, vol. 81, pp. 671 - 677, http://dx.doi.org/10.1016/j.meatsci.2008.11.010
    Journal articles | 2009
    Wang J; Zhong Y, 2009, 'Enhancing the depth of cut in abrasive waterjet cutting of alumina ceramics by using multipass cutting with nozzle oscillation.', Machining Science and Technology, vol. 13, pp. 76 - 91, http://dx.doi.org/10.1080/10910340902776085
    Journal articles | 2009
    Wang K; Kang R; Wang J, 2009, 'Influence of abrasive and chemical composition on chemo-mechanical polishing of MgO single crystal substrate', Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, pp. 19 - 23
    Journal articles | 2009
    Zhu HT; Huang CZ; Wang J; Li QL; Che CL, 2009, 'Experimental study on abrasive waterjet polishing for hard-brittle materials', International Journal of Machine Tools and Manufacture, vol. 49, pp. 569 - 578, http://dx.doi.org/10.1016/j.ijmachtools.2009.02.005
    Journal articles | 2009
    Zhu HT; Huang CZ; Wang J; Zhao G; Li QL, 2009, 'Modeling material removal in fracture erosion for brittle materials by abrasive waterjet', Advanced Materials Research, vol. 76-78, pp. 357 - 362, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.357
    Journal articles | 2008
    Che CL; Huang CZ; Wang J; Zhu HT; Li QL, 2008, 'Theoretical model of surface roughness for polishing super hard materials with abrasive waterjet.', Key Engineering Materials, vol. 375-376, pp. 465 - 469
    Journal articles | 2008
    Fan J; Wang C; Wang J; Luo G, 2008, 'Study on the machining performance of micro abrasive jet machining.', China Mechanical Engineering, vol. 5, pp. 584 - 589
    Journal articles | 2008
    Fan J; Wang CY; Wang J; Luo GS, 2008, 'Effect of nozzle type and abrasive on machinability in micro abrasive air jet machining of glass', Key Engineering Materials, vol. 359-360, pp. 404 - 408
    Journal articles | 2008
    Kang R; Wang K; Wang J; Guo D, 2008, 'Removal of scratch on the surface of MgO single crystal substrate in chemical mechanical polishing process', Applied Surface Science, vol. 254, pp. 4856 - 4863, http://dx.doi.org/10.1016/j.apsusc.2008.01.150
    Journal articles | 2008
    Li QL; Wang J; Huang C, 2008, 'Erosion mechanisms of monocrystalline silicon under a microparticle laden air jet', Journal of Applied Physics, vol. 104, pp. 34903 - 034910, http://dx.doi.org/10.1063/1.2963362
    Journal articles | 2008
    Liu H; Wang J; Huang C, 2008, 'Abrasive liquid jet as a flexible polishing tool', International Journal of Materials and Product Technology, vol. 31, pp. 2 - 13, http://dx.doi.org/10.1504/IJMPT.2008.015884
    Journal articles | 2008
    Madadnia J; Shanmugam DK; Nguyen T; Wang J, 2008, 'A study of cavitation induced surface erosion in abrasive waterjet cutting systems.', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 53-54, pp. 357 - 362
    Journal articles | 2008
    Nguyen T; Shanmugam DK; Wang J, 2008, 'Effect of liquid properties on the stability of an abrasive waterjet', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1138 - 1147, http://dx.doi.org/10.1016/j.ijmachtools.2008.01.009
    Journal articles | 2008
    Shanmugam DK; Nguyen T; Wang J, 2008, 'A study of delamination on graphite/epoxy composites in abrasive waterjet machining', Composites Part A - Applied Science and Manufacturing, vol. 39, pp. 923 - 929, http://dx.doi.org/10.1016/j.compositesa.2008.04.001
    Journal articles | 2008
    Shanmugam DK; Wang J; Liu H, 2008, 'Minimisation of kerf tapers in abrasive waterjet machining of alumina ceramics using a compensation technique', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1527 - 1534, http://dx.doi.org/10.1016/j.ijmachtools.2008.07.001
    Journal articles | 2008
    Sun Y; Wang J; Guo D; Zhang Q, 2008, 'Modeling and numerical simulation for the machining of helical surface profiles on cutting tools', International Journal of Advanced Manufacturing Technology, vol. 36, pp. 525 - 534, http://dx.doi.org/10.1007/s00170-006-0860-4
    Journal articles | 2008
    Wang J; Zhang Q, 2008, 'A study of high performance plane rake faced twist drills. Part 1: Geometrical analysis and experimental investigation.', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1276 - 1285, http://dx.doi.org/10.1016/j.ijmachtools.2008.03.005
    Journal articles | 2008
    Wang J; Zhang Q, 2008, 'A study of high-performance plane rake faced twist drills. Part II: Predictive force models', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1286 - 1295, http://dx.doi.org/10.1016/j.ijmachtools.2008.03.006
    Journal articles | 2008
    Zhu HT; Huang CZ; Wang J; Li QL; Che CL, 2008, 'Experimental study on abrasive waterjet machining mechanisms of brittle materials.', Key Engineering Materials, vol. 375-376, pp. 62 - 66
    Journal articles | 2007
    Feng YX; Huang C; Wang J; Hou RG; Lu XY, 2007, 'An experimental study on milling Al2 O3 ceramics with abrasive waterjet.', Key Engineering Materials, vol. 339, pp. 500 - 504, http://dx.doi.org/10.4028/0-87849-430-8.500
    Journal articles | 2007
    Feng YX; Huang CZ; Wang J; Lu XY; Zhu HT, 2007, 'Surface Characteristics of Ceramics Milled with Abrasive Waterjet Technology', Key Engineering Materials, vol. 329, pp. 335 - 340, http://dx.doi.org/10.4028/www.scientific.net/kem.329.335
    Journal articles | 2007
    Hou RG; Huang C; Wang J; Lu XY; Feng YX, 2007, 'Simulation of solid-liquid two-phase flow inside and outside the abrasive water jet nozzle.', Key Engineering Materials, vol. 339, pp. 453 - 457, http://dx.doi.org/10.4028/0-87849-430-8.453
    Journal articles | 2007
    Huang C; Liu H; Wang J; Wang H, 2007, 'Multi-scale and multi-phase nanocomposite ceramic tools and cutting performance', Chinese Journal of Mechanical Engineering, vol. 20, pp. 5 - 7, http://dx.doi.org/10.3901/CJME.2007.05.005
    Journal articles | 2007
    Li QL; Huang C; Wang J; Zhu HT; Che CL, 2007, 'A study on erosion mechanisms of quartz crystals polished by micro abrasive waterjet', Advanced Materials Research, vol. 24-25, pp. 195 - 199, http://dx.doi.org/10.4028/www.scientific.net/AMR.24-25.195
    Journal articles | 2007
    Wang J, 2007, 'Predictive depth of jet penetration models for abrasive waterjet cutting of alumina ceramics', International Journal of Mechanical Sciences, vol. 49, pp. 306 - 316, http://dx.doi.org/10.1016/j.ijmecsci.2006.09.005
    Journal articles | 2006
    Fan J; Wang C; Wang J, 2006, 'Micro abrasive jet machining for precision components finishing', Diamond & Abrasive Engineering, vol. 3, pp. 57 - 61
    Journal articles | 2006
    Gu M; Huang C; Wang J, 2006, 'Effect of nano-scale Al2O3 on mechanical properties of TiB2 ceramic tool materials', Key Engineering Materials, vol. 315-316, pp. 123 - 126
    Journal articles | 2006
    Hou R; Huang C; Wang J; Zhu H; Feng Y, 2006, 'Simulation of gas-solid-liquid three-phase flow inside and outside the abrasive waterjet nozzle', Materials Science Forum, vol. 532-533, pp. 833 - 836
    Journal articles | 2006
    Hou RG; Huang C; Wang J; Feng YX; Zhu H, 2006, 'Simulation of velocity field of two-phase flow for gas and liquid in the abrasive water jet nozzle', Key Engineering Materials, vol. 315-316, pp. 150 - 153
    Journal articles | 2006
    Huang C; Wang J; Feng YX; Zhu H, 2006, 'Recent development of abrasive water jet machining technology', Key Engineering Materials, vol. 315-316, pp. 396 - 400
    Journal articles | 2006
    Huang C; Wang J; Xu L; Wang S, 2006, 'Microstructure and mechanical properties of nano-scale AI2O3 toughened Ti (C,N) matarix cermet tool materials', Materials Science Forum, vol. 532-533, pp. 37 - 40
    Journal articles | 2006
    Huang CZ; Hou RG; Wang J; Feng YX, 2006, 'The effect of high pressure abrasive water jet cutting parameters on cutting performance of granite.', Key Engineering Materials, vol. 304-305, pp. 560 - 564
    Journal articles | 2006
    Liu H; Huang C; Wang J; Liu B, 2006, 'Study on the multi-scale nanocomposite ceramic tool material', Key Engineering Materials, vol. 315-316, pp. 118 - 122
    Journal articles | 2006
    Liu H; Huang C; Wang J; Teng X, 2006, 'Fabrication and mechanical properties of A12O3/Ti(C0.7N0.3) nanocomposites', Materials Research Bulletin, vol. 41, pp. 1215 - 1224, http://dx.doi.org/10.1016/j.materresbull.2006.01.014
    Journal articles | 2006
    Liu H; Huang C; Wang J; Teng X, 2006, 'Study on the multi-phase and multi-scale nanocomposite ceramic tool material', Materials Science Forum, vol. 532-533, pp. 245 - 248
    Journal articles | 2006
    Liu H; Wang J; Huang C, 2006, 'Abrasive liquid jet as a flexible polishing tool', International Journal of Materials and Product Technology, vol. 31, pp. 2 - 13, http://dx.doi.org/10.1504/IJMPT.2008.015884
    Journal articles | 2006
    Sun JH; Huang C; Wang J; Liu H, 2006, 'Mechanical properties and microstructure of ZrO2-TiN-Al2O3 composite ceramics', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 416, pp. 104 - 108, http://dx.doi.org/10.1016/j.msea.2005.10.024
    Journal articles | 2006
    Sun JH; Huang C; Wang J; Liu H; Liu B, 2006, 'Effect of tin AI2O3 on the low temperature degradation of 3Y-TZP', Materials Science Forum, vol. 532-533, pp. 281 - 284
    Journal articles | 2006
    Sun JH; Huang CZ; Wang J, 2006, 'Effect of TiN addition on the low temperature degradation of ceramic tool materials 3Y-TZP', Key Engineering Materials, vol. 315-316, pp. 40 - 44
    Journal articles | 2006
    Sun Y; Wang J; Guo D, 2006, 'Guide curve based interppolation scheme of parametric curves for precision CNC machining', International Journal of Machine Tools and Manufacture, vol. 46, pp. 235 - 242, http://dx.doi.org/10.1016/j.ijmachtools.2005.05.024
    Journal articles | 2006
    Wang J; Liu H, 2006, 'Profile cutting on alumina ceramics by abrasive waterjet. Part 1: Experimental investigation', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, vol. 220, pp. 703 - 714, http://dx.doi.org/10.1243/09544062JMES207A
    Journal articles | 2006
    Wang J; Liu H, 2006, 'Profile cutting on alumina ceramics by abrasive waterjet. Part 2: Cutting performance models', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, vol. 220, pp. 715 - 725, http://dx.doi.org/10.1243/09544062JMES207B
    Journal articles | 2006
    Wang X; Wu YB; Xu W; Wang L; Wang J, 2006, 'Effect of focal offset on energy distribution in laser truing grinding wheel', China Mechanical Engineering, vol. 17, pp. 702 - 705
    Journal articles | 2006
    Wang XY; Wang J; Xu WJ; Wu DJ; Lei MK, 2006, 'A study of laser surface modification for GCr15 steel', International Journal of Materials and Product Technology, vol. 31, pp. 88 - 96, http://dx.doi.org/10.1504/IJMPT.2008.015899
    Journal articles | 2006
    Xu S; Wang J, 2006, 'A study of abrasive waterjet cutting of alumina ceramics with controlled nozzle oscillation', International Journal of Advanced Manufacturing Technology, vol. 27, pp. 693 - 702, http://dx.doi.org/10.1007/s00170-004-2256-7
    Journal articles | 2006
    Zhu H; Huang C; Wang J; Feng YX; Hou RG, 2006, 'Theoretical analysis on the machining mechanism in ultrasonic vibration abrasive waterjet', Key Engineering Materials, vol. 315-316, pp. 127 - 130
    Journal articles | 2006
    Zhu HT; Huang C; Wang J; Feng YX; Hou RG, 2006, 'Study on cutting coloring stainless steel by abrasive waterjet', Key Engineering Materials, vol. 315-316, pp. 822 - 824
    Journal articles | 2006
    Zou B; Huang CZ; Wang J; Liu B, 2006, 'Effect of nano-scale TiN on the mechanical properties and microstructure of Si3N4 based ceramic tool materials', Key Engineering Materials, vol. 315-316, pp. 154 - 158
    Journal articles | 2005
    Wang J; Liu H, 2005, 'Mathematical models for the hydrodynamic characteristics of abrasive waterjets', Key Engineering Materials, vol. 291-292, pp. 459 - 464, http://www.scopus.com/inward/record.url?eid=2-s2.0-34249339028&partnerID=40&md5=d33a70d3fda2bca15dbe2535416623e1
    Journal articles | 2005
    Wang J; Xu S, 2005, 'Enhancing the AWJ Cutting Performance by Multipass Machining with Controlled Nozzle Oscillation', Key Engineering Materials, vol. 291-292, pp. 453 - 458
    Journal articles | 2005
    Wang XY; Wu YB; Wang J; Xu WJ; Kato M, 2005, 'Absorbed energy in laser truing of a small vitrified CBN grinding wheel', Journal of Materials Processing Technology, vol. 164-165, pp. 1128 - 1133, http://dx.doi.org/10.1016/j.jmatprotec.2005.02.108
    Journal articles | 2005
    Wu Y; Wang J; Fan Y; Kato M, 2005, 'Determination of waviness decrease rate by measuring the frequency characteristics of the grinding force in centerless grinding', Journal of Materials Processing Technology, vol. 170, pp. 563 - 569, http://dx.doi.org/10.1016/j.jmatprotec.2004.11.021
    Journal articles | 2004
    Liu H; Wang J; Kelson N; Brown RJ, 2004, 'A study of abrasive waterjet characteristics by CFD simulation', Journal of Materials Processing Technology, vol. 153-154, pp. 488 - 493, http://dx.doi.org/10.1016/j.jmatprotec.2004.04.037
    Journal articles | 2004
    Wang J; Wei XP; Christodoulou P; Hermanto H, 2004, 'Rapid tooling for zinc spin casting using arc metal spray technology', Journal of Materials Processing Technology, vol. 146, pp. 283 - 288, http://dx.doi.org/10.1016/j.jmatprotec.2003.11.014
    Journal articles | 2003
    Chen FL; Wang J; Lemma E; Siores E, 2003, 'Striation formation mechanisms on the jet cutting surface', Journal of Materials Processing Technology, vol. 141, pp. 213 - 218, http://dx.doi.org/10.1016/S0924-0136(02)01120-2
    Journal articles | 2003
    Wang J; Guo DM, 2003, 'The cutting performance in multipass abrasive waterjet machining of industrial ceramics', Journal of Materials Processing Technology, vol. 133, pp. 371 - 377, http://dx.doi.org/10.1016/S0924-0136(02)01125-1
    Journal articles | 2003
    Wang J; Huang CZ; Song WG, 2003, 'The effect of tool flank wear on the orthogonal cutting process and its practical implications', Journal of Materials Processing Technology, vol. 142, pp. 338 - 346, http://dx.doi.org/10.1016/S0924-0136(03)00604-6
    Journal articles | 2003
    Wang J; Kuriyagawa T; Huang CZ, 2003, 'An experimental study to enhance the cutting performance in abrasive waterjet machining', Machining Science and Technology, vol. 7, pp. 191 - 207, http://dx.doi.org/10.1081/MST-120022777
    Journal articles | 2002
    Gudimetla P; Wang J; Wong W, 2002, 'Kerf formation analysis in the abrasive waterjet cutting of industrial ceramics', Journal of Materials Processing Technology, vol. 128, pp. 123 - 129, http://dx.doi.org/10.1016/S0924-0136(02)00437-5
    Journal articles | 2002
    Lemma E; Chen L; Siores E; Wang J, 2002, 'Optimising the AWJ cutting process of ductile materials using nozzle oscillation technique', International Journal of Machine Tools and Manufacture, vol. 42, pp. 781 - 789, http://dx.doi.org/10.1016/S0890-6955(02)00017-2
    Journal articles | 2002
    Lemma E; Chen L; Siores E; Wang J, 2002, 'Study of cutting fiber-reinforced composites by using abrasive water-jet with cutting head oscillation', Composite Structures, vol. 57, pp. 297 - 303, http://dx.doi.org/10.1016/S0263-8223(02)00097-1
    Journal articles | 2002
    Page JR; Wang J, 2002, 'Prediction of shear force using 3D non-linear FEM analyses for a plain weave carbon fabric in a bias extension state', Finite Elements in Analysis and Design, vol. 38, pp. 755 - 764, http://dx.doi.org/10.1016/S0168-874X(01)00104-4
    Journal articles | 2002
    Wang J; Guo DM, 2002, 'A predictive depth of penetration model for abrasive waterjet cutting of polymer matrix composites', Journal of Materials Processing Technology, vol. 121, pp. 390 - 394, http://dx.doi.org/10.1016/S0924-0136(01)01246-8
    Journal articles | 2002
    Wang J; Kuriyagawa T; Wei XP; Guo DM, 2002, 'Optimization of cutting conditions for single pass turning operations using a deterministic approach', International Journal of Machine Tools and Manufacture, vol. 42, pp. 1023 - 1033, http://dx.doi.org/10.1016/S0890-6955(02)00037-8
    Journal articles | 2001
    Wang J, 2001, 'Development of a chip flow model for turning operations', International Journal of Machine Tools and Manufacture, vol. 41, pp. 1265 - 1274, http://dx.doi.org/10.1016/S0890-6955(01)00022-0
    Journal articles | 2001
    Wang J; Armarego EJA, 2001, 'Computer-aided optimization of multiple constraint single pass face milling operations', Machining Science and Technology, vol. 5, pp. 77 - 99, http://dx.doi.org/10.1081/MST-100103179
    Journal articles | 2000
    Huang CZ; Wang J; Ai X, 2000, 'Development of new ceramic cutting tools with alumina coated carbide powders', International Journal of Machine Tools and Manufacture, vol. 40, pp. 823 - 832, http://dx.doi.org/10.1016/S0890-6955(99)00102-9
    Journal articles | 2000
    Wang J, 2000, 'Effect of the multi-layer surface coating of carbide inserts on the cutting forces in turning operations', Journal of Materials Processing Technology, vol. 97, pp. 114 - 119, http://dx.doi.org/10.1016/S0924-0136(99)00353-2
    Journal articles | 2000
    Wang J, 2000, 'Experimental analysis and optimization of the CO2 laser cutting process for metallic coated sheet steels', International Journal of Advanced Manufacturing Technology, vol. 16, pp. 334 - 340, http://dx.doi.org/10.1007/s001700050165
    Journal articles | 1999
    Wang J, 1999, 'Machinability study of polymer matrix composites using abrasive waterjet cutting technology', Journal of Materials Processing Technology, vol. 94, pp. 30 - 35, http://dx.doi.org/10.1016/S0924-0136(98)00443-9
    Journal articles | 1999
    Wang J; Paton R; Page JR, 1999, 'The draping of woven fabric preforms and prepregs for production of polymer composite components', Composites Part A - Applied Science and Manufacturing, vol. 30, pp. 757 - 765, http://dx.doi.org/10.1016/S1359-835X(98)00187-0
    Journal articles | 1999
    Wang J; Wong WCK, 1999, 'A study of abrasive waterjet cutting of metallic coated sheet steels', International Journal of Machine Tools and Manufacture, vol. 39, pp. 855 - 870, http://dx.doi.org/10.1016/S0890-6955(98)00078-9
    Journal articles | 1998
    Wang J; Page JR; Paton R, 1998, 'Experimental investigation of the draping properties of reinforcement fabrics', Composites Science and Technology, vol. 58, pp. 229 - 237, http://dx.doi.org/10.1016/S0266-3538(97)00115-2
    Journal articles | 1995
    Wang J; Mathew P, 1995, 'Development of a general tool model for turning operations based on a variable flow stress theory', International Journal of Machine Tools and Manufacture, vol. 35, pp. 71 - 90, http://dx.doi.org/10.1016/0890-6955(94)E0004-3
  • Conference Papers | 2020
    Wang Z; Huang C; Wang J; Zou B; Abbas CA; Wang X, 2020, 'Design and Characterization of Hydroxyapatite Scaffolds Fabricated by Stereolithography for Bone Tissue Engineering Application', in Procedia CIRP, pp. 170 - 175, http://dx.doi.org/10.1016/j.procir.2020.05.138
    Conference Papers | 2018
    Zhang Z; Wang C; Yao P; Wang J; Huang C; Zhang K; Liu Y, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
    Conference Papers | 2018
    Zhang Z; Wang C; Yao P; Wang J; Huang C; Zhang K; Liu Y, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
    Conference Papers | 2018
    Zhang Z; Wang C; Yao P; Wang J; Huang C; Zhang K; Liu Y, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
    Conference Papers | 2015
    Nguyen T; Wang J; Kwok N; Li H, 2015, 'Predictive models for the geometrical characteristics of channels milled by abrasive waterjet', in Proc. of 2015 IEEE International Conference on Automation Science and Engineering, IEEE, Gothenburg, Sweden, pp. 1459 - 1464, presented at 2015 IEEE International Conference on Automation Science and Engineering (CASE), Gothenburg, Sweden, 24 August 2015 - 28 August 2015, http://dx.doi.org/10.1109/CoASE.2015.7294305
    Conference Papers | 2014
    Yao P; Wei W; Huang CZ; Wang J; Zhu HT; Zhang ZY, 2014, 'High efficiency abrasive waterjet dressing of diamond grinding wheel', in Advanced Materials Research, pp. 243 - 248, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.243
    Conference Papers | 2006
    Hou RG; Huang C; Wang J; Lu XY; Zhu HT, 2006, 'Simulation for the outside velocityfield of abrasive water jet nozzle with different geometry', in Current Development in Abrasive Technology, Dalian, China, pp. 243 - 247, presented at Current Development in Abrasive Technology, Dalian, China, 26 September 2006 - 29 September 2006
    Conference Papers | 2006
    Wang XY; Wang J; Xu WJ; Wu DJ; Lei MK, 2006, 'A study of laser surface modification for GCr 15 steel', in Gao H; Wang J; Jin Z; Guo DM (eds.), ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, FRONTIERS DESIGN MANUFACTURING, PEOPLES R CHINA, Dalian, pp. 615 - +, presented at International Conference on Surface Finishing Technology and Surface Engineering (ICSFT2006), PEOPLES R CHINA, Dalian, 25 September 2006 - 27 September 2006, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000246140100101&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
    Conference Papers | 1999
    Page JR; Wang J, 1999, 'Prediction of shear force and an analysis of yarn slippage for a plain weave carbon fabric in a bias extension state', in IAC 99, Adelaide, Sth Aust, pp. 977 - 986, presented at IAC 99, Adelaide, Sth Aust, 13 September 1999 - 15 September 1999, http://dx.doi.org/10.1016/S0266-3538(99)00198-0

Professor Wang has received 22 ARC (Australian Research Council) grants as Chief Investigator (CI), including 9 ARC Discovery-Projects grants as the lead or sole CI and an ARC Large grant, as well as a number of other grants from CRC (collaborative research centre), the Federal Department of Education, universities (including grants and fellowships), local industry, government agencies, and international granting bodies in support of his research.

2001       Invitation Fellowship, Australian Academy of Science
2001       First Grade Scientific Advancement Award, Ministry of Education, China
2003       Outstanding Overseas Young Scholar Award, National Natural Science Foundation of China
2004       Outstanding Academic Contribution Award in Research and Scholarship, Queensland University of Technology
2008       Endeavour Executive Award, Department of Education, Science and Training, Australia
2012       Advanced Innovation Award, NewSouth Innovations Pty. Ltd., Australia
2016       President's Award, Ausinan Science and Technology Society, Australia

2016       2015 Thatcher Bros Prize, the Institution of Mechanical Engineers (UK)
2019       Dalian University of Technology Alumnus Outstanding Achievement Award
2019       Lifetime Achievement Award, Ausinan Science and Technology Society
2019       First Grade Technology Invention Award, Ministry of Education, China

Manufacturing processes and technologies; micro-machining; micro-fabrication; nano-machining; laser processing; water jet machining; abrasive jet machining.