Dr Khalegh Barati

Ph.D. in Construction Engineering and Management, University of New South Wales, Australia, 2018
M.Sc. in Construction Engineering and Management, Sharif University of Technology, Iran, 2013
B.Sc. in Civil Engineering, University of Isfahan, Iran, 2010

Engineering

Civil and Environmental Engineering

Nexus Fellow in Engineering Construction and Management in the School of of Civil and Environmental Engineering

Research Interests

Automation in Construction
Data Sensing and Monitoring of Field Operations
Modularisation and Prefabrication
Energy, Fuel Use and Emissions Modelling of Construction Phases and Equipment
Sustainability Issues in Construction
Optimization and Productivity Improvement in Construction Projects
Project Management, Controlling and Planning

Looking for perspective PhD students in the above-mentioned topics

Professional Memberships

Member of Engineers Australia
Member of American Society of Civil Engineers (ASCE)
Member of International Association for Automation and Robotics in Construction (IAARC)

Mobile

+61 2 9385 5562

E-mail

khalegh.barati@unsw.edu.au

Location

Civil Engineering Building (H20), Level 2, Room 209, Kensington Campus

Journal articles | 2023

Guo Y; Shen X; Linke J; Wang Z; Barati K, 2023, 'Quantification of Structural Defects Using Pixel Level Spatial Information from Photogrammetry †', Sensors, 23, http://dx.doi.org/10.3390/s23135878

Journal articles | 2023

Ibrahimkhil MH; Shen X; Barati K; Wang CC, 2023, 'Dynamic Progress Monitoring of Masonry Construction through Mobile SLAM Mapping and As-Built Modeling', Buildings, 13, http://dx.doi.org/10.3390/buildings13040930

Journal articles | 2022

Barati K; Shen X; Li N; Carmichael DG, 2022, 'Automatic Mass Estimation of Construction Vehicles by Modeling Operational and Engine Data', Journal of Construction Engineering and Management, 148, http://dx.doi.org/10.1061/(ASCE)CO.1943-7862.0002225

Journal articles | 2021

Loizou L; Barati K; Shen X; Li B, 2021, 'Quantifying advantages of modular construction: Waste generation', Buildings, 11, http://dx.doi.org/10.3390/buildings11120622

Journal articles | 2017

Barati K; Shen X, 2017, 'Optimal Driving Pattern of On-Road Construction Equipment for Emissions Reduction', Procedia Engineering, 180, pp. 1221 - 1228, http://dx.doi.org/10.1016/j.proeng.2017.04.283

Journal articles | 2016

Barati K; Shen X, 2016, 'Operational level emissions modelling of on-road construction equipment through field data analysis', Automation in Construction, 72, pp. 338 - 346, http://dx.doi.org/10.1016/j.autcon.2016.08.010

Journal articles | 2015

Sepasgozar SME; Shiran GR; Barati K; Siew RYJ, 2015, 'Modelling International Project Feasibility of Sustainable Construction Management: Case Study of Tele-Communication Towers', Modular and Offsite Construction (MOC) Summit Proceedings, pp. 121 - 129, http://dx.doi.org/10.29173/mocs195
Conference Papers | 2022

Guo Y; Wang Z; Shen X; Barati K; Linke J, 2022, 'AUTOMATIC DETECTION AND DIMENSIONAL MEASUREMENT OF MINOR CONCRETE CRACKS WITH CONVOLUTIONAL NEURAL NETWORK', in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Sydney, Australia, pp. 57 - 64, presented at ISPRS TC IV 7th International Conference on Smart Data and Smart Cities (SDSC), Sydney, Australia, 19 October 2022 - 21 October 2022, http://dx.doi.org/10.5194/isprs-annals-X-4-W3-2022-57-2022

Conference Papers | 2022

Jiang Z; Shen X; Ibrahimkhil MH; Barati K; Linke J, 2022, 'SCAN-VS-BIM FOR REAL-TIME PROGRESS MONITORING OF BRIDGE CONSTRUCTION PROJECT', in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Sydney, Australia, pp. 97 - 104, presented at ISPRS TC IV 7th International Conference on Smart Data and Smart Cities (SDSC), Sydney, Australia, 19 October 2022 - 21 October 2022, http://dx.doi.org/10.5194/isprs-annals-X-4-W3-2022-97-2022

Conference Papers | 2021

Heidary MS; Mousavi M; Alvanchi A; Barati K; Karimi H, 2021, 'Semi-automatic Construction Hazard Identification Method Using 4D BIM', in Proceedings of the International Symposium on Automation and Robotics in Construction, pp. 590 - 597

Conference Papers | 2021

Ibrahimkhil MH; Shen X; Barati K, 2021, 'Enhanced Construction Progress Monitoring through Mobile Mapping and As-built Modeling', in Proceedings of the International Symposium on Automation and Robotics in Construction, pp. 916 - 923

Conference Papers | 2021

Kalantari S; Ahmadi M; Barati K; Khojeh S, 2021, 'Dam Sustainability Assessment and Flood Volume Estimation Using Remote Sensing and GIS', in Proceedings of the International Symposium on Automation and Robotics in Construction, pp. 190 - 196

Conference Papers | 2021

Mehrvarz N; Barati K; Shen X, 2021, 'Embodied Energy Modeling of Modular Residential Projects Using BIM', in Proceedings of the International Symposium on Automation and Robotics in Construction, pp. 483 - 490

Conference Papers | 2020

Mehrvarz N; Ye Z; Barati K; Shen X, 2020, 'Optimal Travel Routes of On-road Vehicles Considering Sustainability', in Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot, pp. 507 - 513

Conference Papers | 2019

Barati K; Shen X, 2019, 'Modelling traffic conditions on fuel use and emissions of on-road construction equipment', in Proceedings of the 36th International Symposium on Automation and Robotics in Construction, ISARC 2019, Banff, Canada, pp. 945 - 952, presented at 36th International Symposium on Automation and Robotics in Construction (ISARC 2019), Banff, Canada, 21 May 2019, http://dx.doi.org/10.22260/ISARC2019/0126

Conference Papers | 2018

Barati K; Shen X, 2018, 'Modeling and optimizing fuel usage of on-road construction equipment', in Construction Research Congress 2018: Sustainable Design and Construction and Education - Selected Papers from the Construction Research Congress 2018, pp. 198 - 207, http://dx.doi.org/10.1061/9780784481301.020

Conference Papers | 2017

Barati K; Shen X, 2017, 'Mass estimation of on-road construction equipment based on modelling operational parameters', in ISARC 2017 - Proceedings of the 34th International Symposium on Automation and Robotics in Construction, pp. 294 - 301, http://dx.doi.org/10.22260/isarc2017/0040

Conference Papers | 2016

Barati K; Shen X, 2016, 'Emissions modelling of earthmoving equipment', in ISARC 2016 - 33rd International Symposium on Automation and Robotics in Construction, pp. 538 - 546, http://dx.doi.org/10.22260/isarc2016/0065

Conference Papers | 2016

Klein J; Shen X; Barati K, 2016, 'Optimum driving pattern for minimizing fuel consumption of on-road vehicles', in ISARC 2016 - 33rd International Symposium on Automation and Robotics in Construction, pp. 555 - 562, http://dx.doi.org/10.22260/isarc2016/0067

Conference Papers | 2015

Barati K; Shen J, 2015, 'Modeling Emissions of Construction and Mining Equipment by Tracking Field Operations', in Proceedings of the 32nd International Symposium on Automation and Robotics in Construction and Mining (ISARC 2015), Oulu, Finland, presented at The 32nd International Symposium on Automation and Robotics in Construction and Mining, Oulu, Finland, 15 June 2015 - 18 June 2015

Conference Papers | 2015

Barati K; Shen X, 2015, 'Modeling emissions of construction and mining equipment by tracking field operations', in 32nd International Symposium on Automation and Robotics in Construction and Mining: Connected to the Future, Proceedings

Conference Papers | 2015

Barati K; Shen X, 2015, 'Modeling emissions of construction and mining equipment by tracking field operations', in 32nd International Symposium on Automation and Robotics in Construction and Mining: Connected to the Future, Proceedings

Conference Papers | 2015

Barati K; Shen X, 2015, 'Modeling emissions of construction and mining equipment by tracking field operations', in 32nd International Symposium on Automation and Robotics in Construction and Mining: Connected to the Future, Proceedings, http://dx.doi.org/10.22260/isarc2015/0064

Top 10 Best Conference Papers Award, the 32nd International Symposium on Automation and Robotics in Construction and Mining (ISARC2015), Finland, 2015

My Research Supervision

Supervising more than 10 students at PhD, MSc, and BSc levels in the AICON Laboratory

My Teaching

Courses currently taught

CVEN4050 Thesis A
CVEN4051 Thesis B