Scientia Professor Liangchi Zhang

Chen Y; Zhang L, 2013, Polishing of Diamond Materials, Springer London, http://dx.doi.org/10.1007/978-1-84996-408-1

Chen Y; Zhang LC, 2012, Dynamic Friction Polishing for Polycrystalline Diamond Composites, Nova Science Publishers, New York, https://www.novapublishers.com/catalog/product_info.php?products_id=34774&osCsid=b

2011, Engineering Education and Management Vol 1, Zhang LC; Zhang C, (ed.), Springer-Verlag, Berlin, Berlin, http://dx.doi.org/10.1007/978-3-642-24823-8

Zhang L; Zhang C; Shi T, 2010, Advanced Materials Research: Preface

Wu Q; Xu W; Zhang L, 2021, 'Advances in machining of particulate-reinforced metal matrix composites', in Advanced Machining and Finishing, Elsevier, pp. 45 - 75, http://dx.doi.org/10.1016/B978-0-12-817452-4.00016-6

Mylvaganam K; Chen Y; Liu W; Liu M; Zhang L, 2014, 'Hard thin films: Applications and challenges', in Anti-Abrasive Nanocoatings: Current and Future Applications, pp. 544 - 567, http://dx.doi.org/10.1016/B978-0-85709-211-3.00021-2

Chen Y; Zhang LC, 2012, 'Polishing of diamond Surfaces', in Eisenberg T; Schreiner E (ed.), Diamonds: Properties, Synthesis and Applications, Nova Sciences Publishers, Inc., USA, USA, pp. 55 - 72, https://www.novapublishers.com/catalog/product_info.php?products_id=34744

Zhang LC, 2011, 'Surface Integrity of Materials Induced by Grinding', in Jackson MJ; Davim JP (ed.), Machining with Abrasives, Springer, NY Dordrecht Heidelberg London, pp. 245 - 267, http://dx.doi.org/10.1007/978-1-4419-7302-3_5

Li Z; Fu J; Zhang L; Ma J; Shen J, 2023, 'Rapid Forming of Nanowire Array on Polyvinylidene Fluoride Polymer Surfaces at Room Temperature by Ultrasonic Loading', Advanced Engineering Materials, vol. 25, pp. 2200700 - 2200700, http://dx.doi.org/10.1002/adem.202200700

Li W; Zhang L; Wu C; Cui Z; Niu C, 2022, 'A new lightweight deep neural network for surface scratch detection', International Journal of Advanced Manufacturing Technology, vol. 123, pp. 1999 - 2015, http://dx.doi.org/10.1007/s00170-022-10335-8

Li W; Zhang L; Wu C; Cui Z; Niu C, 2022, 'Influence of tool and workpiece properties on the wear of the counterparts in contact sliding', Journal of Tribology, vol. 144, http://dx.doi.org/10.1115/1.4050902

Li W; Zhang LC; Wu CH; Cui ZX; Niu C; Wang Y, 2022, 'Debris effect on the surface wear and damage evolution of counterpart materials subjected to contact sliding', Advances in Manufacturing, vol. 10, pp. 72 - 86, http://dx.doi.org/10.1007/s40436-021-00377-8

Zhao H; Wu Z; Liu A; Zhang L, 2022, 'Numerical insights into the effect of ITZ and aggregate strength on concrete properties', Theoretical and Applied Fracture Mechanics, vol. 120, http://dx.doi.org/10.1016/j.tafmec.2022.103415

Gain AK; Zhang L; Lim S, 2021, 'Tribological behavior of Ti–6Al–4V alloy: Subsurface structure, damage mechanism and mechanical properties', Wear, vol. 464-465, pp. 203551 - 203551, http://dx.doi.org/10.1016/j.wear.2020.203551

Gao S; Gain AK; Zhang L, 2021, 'A metamaterial for wearable piezoelectric energy harvester', SMART MATERIALS AND STRUCTURES, vol. 30, http://dx.doi.org/10.1088/1361-665X/abca09

Li C; Zhang L; Ding J; Wu C; Sun L; Lin Q; Jiang Z, 2021, 'Kinematic modeling of surface topography ground by an electroplated diamond wheel', International Journal of Advanced Manufacturing Technology, vol. 114, pp. 2753 - 2765, http://dx.doi.org/10.1007/s00170-021-06944-4

Li W; Zhang L; Chen X; Wu C; Cui Z; Niu C, 2021, 'Predicting the evolution of sheet metal surface scratching by the technique of artificial intelligence', International Journal of Advanced Manufacturing Technology, vol. 112, pp. 853 - 865, http://dx.doi.org/10.1007/s00170-020-06394-4

Li Z; Luo Z; Zhang LC; Wang CH, 2021, 'Topological design of pentamode lattice metamaterials using a ground structure method', Materials and Design, vol. 202, http://dx.doi.org/10.1016/j.matdes.2021.109523

Rahaman ML; Zhang L, 2021, 'An investigation on the friction, wear and deformation of potassium dihydrogen phosphate', Wear, vol. 476, pp. 203624 - 203624, http://dx.doi.org/10.1016/j.wear.2021.203624

Tian Y; Feng H; Li J; Fang Q; Zhang L, 2021, 'Nanoscale sliding friction behavior on Cu/Ag bilayers influenced by water film', Applied Surface Science, vol. 545, http://dx.doi.org/10.1016/j.apsusc.2021.148957

Wang Y; Wu C; Zhang L; Qu P; Li S; Jiang Z, 2021, 'Thermal oxidation and its effect on the wear of Mg alloy AZ31B', Wear, vol. 476, http://dx.doi.org/10.1016/j.wear.2021.203673

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2021, 'Effect of the elastic deformation of rolls on the surface texture transfer in skin-pass rolling', International Journal of Mechanical Sciences, vol. 198, http://dx.doi.org/10.1016/j.ijmecsci.2021.106358

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2021, 'Multiscale Interface Stress Characterisation in Cold Rolling', Metals and Materials International, vol. 27, pp. 1997 - 2013, http://dx.doi.org/10.1007/s12540-020-00918-z

Wu C; Zhang L; Qu P; Li S; Jiang Z; Li W, 2021, 'An Investigation into the Texture Transfer in the Process of Lubricated Skin Pass Rolling', Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 143, http://dx.doi.org/10.1115/1.4050466

Wu C; Zhang L; Qu P; Li S; Jiang Z; Li W, 2021, 'Surface texture transfer in skin-pass rolling with the effect of roll surface wear', Wear, vol. 476, http://dx.doi.org/10.1016/j.wear.2021.203764

Wu Z; Zhang L, 2021, 'Mechanical properties and deformation mechanisms of surface-modified 6H-silicon carbide', Journal of Materials Science and Technology, vol. 90, pp. 58 - 65, http://dx.doi.org/10.1016/j.jmst.2021.02.028

Wu Z; Zhang L; Liu W, 2021, 'Structural anisotropy effect on the nanoscratching of monocrystalline 6H-silicon carbide', Wear, vol. 476, pp. 203677 - 203677, http://dx.doi.org/10.1016/j.wear.2021.203677

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Luo G; Sun L; Zhang L, 2021, 'Equivalent Circuit Model for a Large Array of Coupled Piezoelectric Micromachined Ultrasonic Transducers with High Emission Performance', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 68, pp. 718 - 733, http://dx.doi.org/10.1109/TUFFC.2020.3008179

Yang S; Zhang L, 2021, 'Characterization of mechanical properties and failure of potassium dihydrogen phosphate under mechanical stressing', Ceramics International, vol. 47, pp. 15875 - 15882, http://dx.doi.org/10.1016/j.ceramint.2021.02.162

Yang S; Zhang L; Wu Z, 2021, 'An investigation on the nano-abrasion wear mechanisms of KDP crystals', Wear, vol. 476, http://dx.doi.org/10.1016/j.wear.2021.203692

Yang S; Zhang L; Wu Z, 2021, 'Characterization and criteria of phase transformations and lattice slipping in potassium dihydrogen phosphate crystals', Journal of the American Ceramic Society, vol. 104, pp. 5955 - 5965, http://dx.doi.org/10.1111/jace.17955

Yang S; Zhang L; Wu Z, 2021, 'Effect of Anisotropy of Potassium Dihydrogen Phosphate Crystals on Its Deformation Mechanisms Subjected to Nanoindentation', ACS Applied Materials and Interfaces, vol. 13, pp. 41351 - 41360, http://dx.doi.org/10.1021/acsami.1c12349

Yang S; Zhang L; Xie H; Liu W, 2021, 'Interaction potential function for the deformation analysis of potassium dihydrogen phosphate using molecular dynamics simulation', Computational Materials Science, vol. 187, http://dx.doi.org/10.1016/j.commatsci.2020.110122

Zhang L; Wu C; Sedaghat H, 2021, 'A note on the applicability of a constitutive model with acoustoplasticity to high strain rate deformation induced by high frequency impacts', International Journal of Impact Engineering, vol. 157, http://dx.doi.org/10.1016/j.ijimpeng.2021.103977

Zhang L; Wu C; Sedaghat H, 2021, 'Ultrasonic vibration–assisted incremental sheet metal forming', International Journal of Advanced Manufacturing Technology, vol. 114, pp. 3311 - 3323, http://dx.doi.org/10.1007/s00170-021-07068-5

Gain AK; Zhang L, 2020, 'Mechanisms and optimization for the rapid fabrication method of polymeric microlens arrays', Applied Optics, vol. 59, pp. 405 - 412, http://dx.doi.org/10.1364/AO.383365

Gao S; Liu W; Zhang L; Gain AK, 2020, 'A new polymer-based mechanical metamaterial with tailorable large negative Poisson's ratios', Polymers, vol. 12, pp. 1 - 15, http://dx.doi.org/10.3390/polym12071492

Imran M; Zhang L; Gain AK, 2020, 'Advanced thermal metamaterial design for temperature control at the cloaked region', Scientific Reports, vol. 10, http://dx.doi.org/10.1038/s41598-020-68481-6

Li C; Zhang Y; Zhou G; Wei Z; Zhang L, 2020, 'Theoretical modelling of brittle-to-ductile transition load of KDP crystals on (001) plane during nanoindentation and nanoscratch tests', Journal of Materials Research and Technology, vol. 9, pp. 14142 - 14157, http://dx.doi.org/10.1016/j.jmrt.2020.09.131

Liu W; Zhang L; Luo N, 2020, 'Elastic modulus evolution of rocks under heating–cooling cycles', Scientific Reports, vol. 10, http://dx.doi.org/10.1038/s41598-020-70920-3

Vijayaraghavan V; Zhang L, 2020, 'Tensile Properties of Boron Nitride-Carbon Nanosheet-Reinforced Aluminum Nanocomposites Using Molecular Dynamics Simulation', JOM, vol. 72, pp. 2305 - 2311, http://dx.doi.org/10.1007/s11837-020-04031-9

Wu Q; Zhang L, 2020, 'Microstructure-based three-dimensional characterization of chip formation and surface generation in the machining of particulate-reinforced metal matrix composites', International Journal of Extreme Manufacturing, vol. 2, pp. 045103 - 045103, http://dx.doi.org/10.1088/2631-7990/abab4b

Wu Z; Liu W; Zhang L; Lim S, 2020, 'Amorphization and dislocation evolution mechanisms of single crystalline 6H-SiC', Acta Materialia, vol. 182, pp. 60 - 67, http://dx.doi.org/10.1016/j.actamat.2019.10.037

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Luo G; Sun L; Zhang L, 2020, 'Equivalent Circuit Models of Cell and Array for Resonant Cavity-Based Piezoelectric Micromachined Ultrasonic Transducer', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 67, pp. 2103 - 2118, http://dx.doi.org/10.1109/TUFFC.2020.2993805

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Sun L; Luo G; Zhang L, 2020, 'Array Design of Piezoelectric Micromachined Ultrasonic Transducers with Low-Crosstalk and High-Emission Performance', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 67, pp. 789 - 800, http://dx.doi.org/10.1109/TUFFC.2019.2956181

Zhang Y; Hou N; Zhang L, 2020, 'Effect of ultra-precision fly-cutting on the surface integrity of potassium dihydrogen phosphate crystals', Optical Materials Express, vol. 10, pp. 971 - 980, http://dx.doi.org/10.1364/OME.390276

Zhang Y; Hou N; Zhang LC; Wang Q, 2020, 'Elastic-plastic-brittle transitions of potassium dihydrogen phosphate crystals: characterization by nanoindentation', Advances in Manufacturing, vol. 8, pp. 447 - 456, http://dx.doi.org/10.1007/s40436-020-00320-3

Fang C; Yan Z; Deng W; Zhang L, 2019, 'Material removal in grinding sapphire wafers with brazed–diamond pellet plates', Materials and Manufacturing Processes, vol. 34, pp. 791 - 799, http://dx.doi.org/10.1080/10426914.2019.1594260

Gain AK; Zhang L, 2019, 'Effects of Ni nanoparticles addition on the microstructure, electrical and mechanical properties of Sn-Ag-Cu alloy', Materialia, vol. 5, http://dx.doi.org/10.1016/j.mtla.2019.100234

Gain AK; Zhang L, 2019, 'Nanosized samarium oxide (Sm2O3) particles suppressed the IMC phases and enhanced the shear strength of environmental-friendly Sn-Ag-Cu material', Materials Research Express, vol. 6, http://dx.doi.org/10.1088/2053-1591/ab0cd4

Gain AK; Zhang L, 2019, 'Temperature and humidity effects on microstructure and mechanical properties of an environmentally friendly Sn–Ag–Cu material', Journal of Materials Science, vol. 54, pp. 12863 - 12874, http://dx.doi.org/10.1007/s10853-019-03784-2

Hou N; Zhang L; Zhang Y; Zhang F, 2019, 'On the Ultra-Precision Fabrication of Damage-Free Optical KDP Components: Mechanisms and Problems', Critical Reviews in Solid State and Materials Sciences, vol. 44, pp. 283 - 297, http://dx.doi.org/10.1080/10408436.2018.1490247

Li C; Zhang L; Sun L; Yang S; Wu C; Long X; Ding J; Jiang Z, 2019, 'A quantitative analysis of the indentation fracture of fused silica', Journal of the American Ceramic Society, vol. 102, pp. 7264 - 7277, http://dx.doi.org/10.1111/jace.16645

Liu WD; Liu M; Zhang LC, 2019, 'Thermally induced surface deterioration of glassy carbons', Materials Research Express, vol. 6, http://dx.doi.org/10.1088/2053-1591/ab11ed

Mylvaganam K; Zhang L, 2019, 'Effect of external stresses on the optical and electronic properties of potassium dihydrogen phosphate crystals', Materials Research Express, vol. 6, http://dx.doi.org/10.1088/2053-1591/aafa2d

Sedaghat H; Xu W; Zhang L, 2019, 'Ultrasonic vibration-assisted metal forming: Constitutive modelling of acoustoplasticity and applications', Journal of Materials Processing Technology, vol. 265, pp. 122 - 129, http://dx.doi.org/10.1016/j.jmatprotec.2018.10.012

Vijayaraghavan V; Zhang L, 2019, 'Nanomechanics of single layer hybrid boron nitride–carbon nanosheets: A molecular dynamics study', Computational Materials Science, vol. 159, pp. 376 - 384, http://dx.doi.org/10.1016/j.commatsci.2018.12.042

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2019, 'A new method for predicting the three-dimensional surface texture transfer in the skin pass rolling of metal strips', Wear, vol. 426-427, pp. 1246 - 1264, http://dx.doi.org/10.1016/j.wear.2018.12.020

Wu Q; Xu W; Zhang L, 2019, 'Machining of particulate-reinforced metal matrix composites: An investigation into the chip formation and subsurface damage', Journal of Materials Processing Technology, vol. 274, http://dx.doi.org/10.1016/j.jmatprotec.2019.116315

Wu Q; Xu W; Zhang L, 2019, 'Microstructure-based modelling of fracture of particulate reinforced metal matrix composites', Composites Part B: Engineering, vol. 163, pp. 384 - 392, http://dx.doi.org/10.1016/j.compositesb.2018.12.099

Wu Z; Liu W; Zhang L, 2019, 'Effect of structural anisotropy on the dislocation nucleation and evolution in 6H–SiC under nanoindentation', Ceramics International, vol. 45, pp. 14229 - 14237, http://dx.doi.org/10.1016/j.ceramint.2019.04.131

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Luo G; Sun L; Zhang L, 2019, 'An Analytical Equivalent Circuit Model for Optimization Design of a Broadband Piezoelectric Micromachined Ultrasonic Transducer with an Annular Diaphragm', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 66, pp. 1760 - 1776, http://dx.doi.org/10.1109/TUFFC.2019.2928147

Xu W; Zhang L, 2019, 'Heat effect on the material removal in the machining of fibre-reinforced polymer composites', International Journal of Machine Tools and Manufacture, vol. 140, pp. 1 - 11, http://dx.doi.org/10.1016/j.ijmachtools.2019.01.005

Zhang Y; Hou N; Zhang LC, 2019, 'Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultra-precision fly cutting', Advances in Manufacturing, vol. 7, pp. 270 - 277, http://dx.doi.org/10.1007/s40436-019-00265-2

Basak AK; Zhang L, 2018, 'Deformation of Ti-Based Bulk Metallic Glass Under a Cutting Tip', Tribology Letters, vol. 66, http://dx.doi.org/10.1007/s11249-017-0975-9

Gain AK; Zhang L, 2018, 'Growth nature of in-situ Cu6Sn5-phase and their influence on creep and damping characteristics of Sn-Cu material under high-temperature and humidity', Microelectronics Reliability, vol. 87, pp. 278 - 285, http://dx.doi.org/10.1016/j.microrel.2018.07.053

Gain AK; Zhang L, 2018, 'The effects of TiO2 nanoparticles addition on the thermal shock resistance, shear strength and IMC layer growth of SAC305 alloy', Materialia, vol. 3, pp. 64 - 73, http://dx.doi.org/10.1016/j.mtla.2018.10.009

Gain AK; Zhang L, 2018, 'Thermal aging effects on microstructure, elastic property and damping characteristic of a eutectic Sn-3.5Ag solder', Journal of Materials Science: Materials in Electronics, vol. 29, pp. 14519 - 14527, http://dx.doi.org/10.1007/s10854-018-9586-y

Gain AK; Zhang, Liangchi , 2018, 'High-temperature and humidity change the microstructure and degrade the material properties of tin-silver interconnect material', Microelectronics Reliability, vol. 83, pp. 101 - 110, http://dx.doi.org/10.1016/j.microrel.2018.02.022

Li C; Sun L; Yang S; Zhang L; Wu C; Jiang Z, 2018, 'Three-dimensional characterization and modeling of diamond electroplated grinding wheels', International Journal of Mechanical Sciences, vol. 144, pp. 553 - 563, http://dx.doi.org/10.1016/j.ijmecsci.2018.06.010

Liu W; Zhang L, 2018, 'Mechanisms of the complex thermo-mechanical behavior of polymer glass across a wide range of temperature variations', Polymers, vol. 10, http://dx.doi.org/10.3390/polym10101153

Moridi A; Zhang L; Liu W; Duvall S; Brawley A; Jiang Z; Yang S; Li C, 2018, 'Characterisation of high thermal conductivity thin-film substrate systems and their interface thermal resistance', Surface and Coatings Technology, vol. 334, pp. 233 - 242, http://dx.doi.org/10.1016/j.surfcoat.2017.11.021

Shen J; Wu C; Zhang L, 2018, 'Effects of sliding speed and lubrication on the tribological behaviour of stainless steel', International Journal of Advanced Manufacturing Technology, vol. 94, pp. 341 - 350, http://dx.doi.org/10.1007/s00170-017-0907-8

Vijayaraghavan V; Zhang L, 2018, 'Effective mechanical properties and thickness determination of boron nitride nanosheets using molecular dynamics simulation', Nanomaterials, vol. 8, http://dx.doi.org/10.3390/nano8070546

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2018, 'A multi-field analysis of hydrodynamic lubrication in high speed rolling of metal strips', International Journal of Mechanical Sciences, vol. 142-143, pp. 468 - 479, http://dx.doi.org/10.1016/j.ijmecsci.2018.05.021

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2018, 'A simple approach for analysing the surface texture transfer in cold rolling of metal strips', International Journal of Advanced Manufacturing Technology, vol. 95, pp. 597 - 608, http://dx.doi.org/10.1007/s00170-017-1218-9

Wu Q; Xu W; Zhang L, 2018, 'A micromechanics analysis of the material removal mechanisms in the cutting of ceramic particle reinforced metal matrix composites', Machining Science and Technology, vol. 22, pp. 638 - 651, http://dx.doi.org/10.1080/10910344.2017.1382516

Wu Z; Liu W; Zhang L, 2018, 'Critical loading conditions of amorphization, phase transformation, and dilation cracking in 6H-silicon carbide', Journal of the American Ceramic Society, vol. 101, pp. 3585 - 3596, http://dx.doi.org/10.1111/jace.15527

Xu W; Zhang L, 2018, 'Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites', Composite Structures, vol. 188, pp. 257 - 265, http://dx.doi.org/10.1016/j.compstruct.2018.01.018

Yu J; Zeng X; Zhang L; Yin C; Chen Y; Liu Y; Cheng S; Lai Y; He K; Xue Q, 2018, 'Inverse spin Hall effect induced by linearly polarized light in the topological insulator Bi2Se3', Optics Express, vol. 26, pp. 4832 - 4841, http://dx.doi.org/10.1364/OE.26.004832

Zhang Y; Hou N; Zhang LC, 2018, 'Investigation into the room temperature creep-deformation of potassium dihydrogen phosphate crystals using nanoindentation', Advances in Manufacturing, vol. 6, pp. 376 - 383, http://dx.doi.org/10.1007/s40436-018-0234-9

Zhao B; Gain AK; Ding W; Zhang L; Li X; Fu Y, 2018, 'A review on metallic porous materials: pore formation, mechanical properties, and their applications', International Journal of Advanced Manufacturing Technology, vol. 95, pp. 2641 - 2659, http://dx.doi.org/10.1007/s00170-017-1415-6

Zhao B; Yu T; Ding W; Zhang L; Su H; Chen Z, 2018, 'Effect of micropores on the microstructure and mechanical properties of porous Cu-Sn-Ti composites', Materials Science and Engineering A, vol. 730, pp. 345 - 354, http://dx.doi.org/10.1016/j.msea.2018.06.013

Zhao G; Wu C; Zhang L; Song J; Ding Q, 2018, 'Friction and wear behavior of PI and PTFE composites for ultrasonic motors', Polymers for Advanced Technologies, vol. 29, pp. 1487 - 1496, http://dx.doi.org/10.1002/pat.4260

Cui D; Zhang L; Mylvaganam K; Liu W; Xu W, 2017, 'Nano-milling on monocrystalline copper: A molecular dynamics simulation', Machining Science and Technology, vol. 21, pp. 67 - 85, http://dx.doi.org/10.1080/10910344.2016.1260430

Cui DD; Zhang LC, 2017, 'Nano-machining of materials: understanding the process through molecular dynamics simulation', Advances in Manufacturing, vol. 5, pp. 20 - 34, http://dx.doi.org/10.1007/s40436-016-0155-4

Ding W; Li H; Zhang L; Xu J; Fu Y; Su H, 2017, 'Diamond wheel dressing: A comprehensive review', Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 139, http://dx.doi.org/10.1115/1.4037991

Ding W; Zhang L; Li Z; Zhu Y; Su H; Xu J, 2017, 'Review on grinding-induced residual stresses in metallic materials', International Journal of Advanced Manufacturing Technology, vol. 88, pp. 2939 - 2968, http://dx.doi.org/10.1007/s00170-016-8998-1

Gain AK; Zhang L, 2017, 'Effect of Ag nanoparticles on microstructure, damping property and hardness of low melting point eutectic tin–bismuth solder', Journal of Materials Science: Materials in Electronics, vol. 28, pp. 15718 - 15730, http://dx.doi.org/10.1007/s10854-017-7465-6

Gain AK; Zhang L, 2017, 'Effect of isothermal aging on microstructure, electrical resistivity and damping properties of Sn–Ag–Cu solder', Journal of Materials Science: Materials in Electronics, vol. 28, pp. 9363 - 9370, http://dx.doi.org/10.1007/s10854-017-6675-2

Gain AK; Zhang L, 2017, 'Effect of thin gold/nickel coating on the microstructure, wettability and hardness of lead-free tin-bismuth-silver solder', Journal of Materials Science: Materials in Electronics, vol. 28, pp. 4885 - 4896, http://dx.doi.org/10.1007/s10854-016-6136-3

Gao CY; Xiao JZ; Zhang LC; Ke YL, 2017, 'On the static and dynamic properties of fiber-reinforced polymer composites', Journal of Thermoplastic Composite Materials, vol. 30, pp. 1560 - 1577, http://dx.doi.org/10.1177/0892705716646418

Liu WD; Zhang LC; Mylvaganam K, 2017, 'Relaxation oscillation of borosilicate glasses in supercooled liquid region', Scientific Reports, vol. 7, http://dx.doi.org/10.1038/s41598-017-16079-w

Monfared A; Liu W; Zhang L, 2017, 'On the adhesion between metallic glass and dies during thermoplastic forming', Journal of Alloys and Compounds, vol. 711, pp. 235 - 242, http://dx.doi.org/10.1016/j.jallcom.2017.04.005

Pramanik A; Zhang LC, 2017, 'Particle fracture and debonding during orthogonal machining of metal matrix composites', Advances in Manufacturing, vol. 5, pp. 77 - 82, http://dx.doi.org/10.1007/s40436-017-0170-0

Rad ZF; Nordon RE; Anthony CJ; Bilston L; Prewett PD; Arns JY; Arns CH; Zhang L; Davies GJ, 2017, 'High-fidelity replication of thermoplastic microneedles with open microfluidic channels', Microsystems and Nanoengineering, vol. 3, http://dx.doi.org/10.1038/micronano.2017.34

Rahaman ML; Zhang L, 2017, 'An investigation into the friction and wear mechanisms of aluminium high silicon alloy under contact sliding', Wear, vol. Volumes 376–377, pp. 940 - 946, http://dx.doi.org/10.1016/j.wear.2016.10.026

Rahaman ML; Zhang L, 2017, 'Interface temperature during contact sliding of two solids: Relationship between predicted flash temperature and the experimentally measured', Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, pp. 3 - 13, http://dx.doi.org/10.1177/1350650116644353

Rahaman ML; Zhang L, 2017, 'Size effect on friction and wear mechanisms of bulk metallic glass', Wear, vol. Volumes 376–377, pp. 1522 - 1527, http://dx.doi.org/10.1016/j.wear.2017.01.068

Wang Z; Li J; Fang QH; Liu B; Zhang L, 2017, 'Investigation into nanoscratching mechanical response of AlCrCuFeNi high-entropy alloys using atomic simulations', Applied Surface Science, vol. 416, pp. 470 - 481, http://dx.doi.org/10.1016/j.apsusc.2017.04.009

Wu C; Qu P; Zhang L; Li S; Jiang Z, 2017, 'A numerical and experimental study on the interface friction of ball-on-disc test under high temperature', Wear, vol. 376-377, pp. 433 - 442, http://dx.doi.org/10.1016/j.wear.2016.11.035

Wu C; Zhang L; Qu P; Li S; Jiang Z; Liu W, 2017, 'Characterization of interface stresses and lubrication of rough elastic surfaces under ball-on-disc rolling', Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, pp. 1552 - 1573, http://dx.doi.org/10.1177/1350650117700793

Wu Z; Liu W; Zhang L, 2017, 'Revealing the deformation mechanisms of 6H-silicon carbide under nano-cutting', Computational Materials Science, vol. 137, pp. 282 - 288, http://dx.doi.org/10.1016/j.commatsci.2017.05.048

Xu W; Zhang L, 2017, 'A new approach to characterising the surface integrity of fibre-reinforced polymer composites during cutting', Composites Part A: Applied Science and Manufacturing, vol. 103, pp. 272 - 282, http://dx.doi.org/10.1016/j.compositesa.2017.10.015

Zhang L; Liu W, 2017, 'Precision glass molding: Toward an optimal fabrication of optical lenses', Frontiers of Mechanical Engineering, vol. 12, pp. 3 - 17, http://dx.doi.org/10.1007/s11465-017-0408-3

Cai Y; Chen YL; Shimizu Y; Ito S; Gao W; Zhang L, 2016, 'Molecular dynamics simulation of subnanometric tool-workpiece contact on a force sensor-integrated fast tool servo for ultra-precision microcutting', Applied Surface Science, vol. 369, pp. 354 - 365, http://dx.doi.org/10.1016/j.apsusc.2016.02.046

Fang QH; Zhang LC, 2016, 'Coupled effect of grain boundary sliding and dislocation emission on fracture toughness of nanocrystalline materials', Journal of Micromechanics and Molecular Physics, vol. 1, http://dx.doi.org/10.1142/S2424913016500089

Gain AK; Zhang L, 2016, 'Growth mechanism of intermetallic compound and mechanical properties of nickel (Ni) nanoparticle doped low melting temperature tin–bismuth (Sn–Bi) solder', Journal of Materials Science: Materials in Electronics, vol. 27, pp. 781 - 794, http://dx.doi.org/10.1007/s10854-015-3817-2

Gain AK; Zhang L, 2016, 'Harsh service environment effects on the microstructure and mechanical properties of Sn–Ag–Cu-1 wt% nano-Al solder alloy', Journal of Materials Science: Materials in Electronics, vol. 27, pp. 11273 - 11283, http://dx.doi.org/10.1007/s10854-016-5250-6

Gain AK; Zhang L, 2016, 'Interfacial microstructure, wettability and material properties of nickel (Ni) nanoparticle doped tin–bismuth–silver (Sn–Bi–Ag) solder on copper (Cu) substrate', Journal of Materials Science: Materials in Electronics, vol. 27, pp. 3982 - 3994, http://dx.doi.org/10.1007/s10854-015-4252-0

Gain AK; Zhang L, 2016, 'Microstructure, mechanical and electrical performances of zirconia nanoparticles-doped tin-silver-copper solder alloys', Journal of Materials Science: Materials in Electronics, vol. 27, pp. 7524 - 7533, http://dx.doi.org/10.1007/s10854-016-4732-x

Gain AK; Zhang L; Quadir MZ, 2016, 'Composites matching the properties of human cortical bones: the design of porous titanium-zirconia (Ti-ZrO2) nanocomposites using polymethyl methacrylate powders', Materials Science & Engineering A, vol. 662, pp. 258 - 267, http://dx.doi.org/10.1016/j.msea.2016.03.066

Gain AK; Zhang L; Quadir MZ, 2016, 'Thermal aging effects on microstructures and mechanical properties of an environmentally friendly eutectic tin-copper solder alloy', Materials and Design, vol. 110, pp. 275 - 283, http://dx.doi.org/10.1016/j.matdes.2016.08.007

Gao CY; Zhang LC; Liu PH, 2016, 'The role of material model in the finite element simulation of high-speed machining of Ti6Al4V', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 230, pp. 2959 - 2967, http://dx.doi.org/10.1177/0954406215604877

Hou N; Zhang Y; Zhang L; Zhang F, 2016, 'Assessing microstructure changes in potassium dihydrogen phosphate crystals induced by mechanical stresses', Scripta Materialia, vol. 113, pp. 48 - 50, http://dx.doi.org/10.1016/j.scriptamat.2015.10.002

Li J; Guo J; Luo H; Fang Q; Wu H; Zhang L; Liu Y, 2016, 'Study of nanoindentation mechanical response of nanocrystalline structures using molecular dynamics simulations', Applied Surface Science, vol. 364, pp. 190 - 200, http://dx.doi.org/10.1016/j.apsusc.2015.12.145

Luo N; Jing HW; Ma ZG; Liu W; Zhang L; Sun G, 2016, 'Erratum: Synthesis of polymorphic titanium oxide nanoparticles by a rapid gas-phase chemical reaction (Mendeleev Communications (2016) 26 (157–159))', Mendeleev Communications, vol. 26, pp. 364, http://dx.doi.org/10.1016/j.mencom.2016.07.034

Wu C; Zhang L; Li S; Jiang Z; Qu P, 2016, 'A unified method for characterizing multiple lubrication regimes involving plastic deformation of surface asperities', Tribology International, vol. 100, pp. 70 - 83, http://dx.doi.org/10.1016/j.triboint.2015.11.020

Xu W; Zhang L, 2016, 'Mechanics of fibre deformation and fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', International Journal of Machine Tools and Manufacture, vol. 103, pp. 40 - 52, http://dx.doi.org/10.1016/j.ijmachtools.2016.01.002

Zhang Y; Zhang LC; Liu M; Zhang FH; Mylvaganam K; Liu WD, 2016, 'Revealing the mechanical properties of potassium dihydrogen phosphate crystals by nanoindentation', Journal of Materials Research, vol. 31, pp. 1056 - 1064, http://dx.doi.org/10.1557/jmr.2016.91

Dai J; Ding W; Zhang L; Xu J; Su H, 2015, 'Understanding the effects of grinding speed and undeformed chip thickness on the chip formation in high-speed grinding', International Journal of Advanced Manufacturing Technology, vol. 81, pp. 995 - 1005, http://dx.doi.org/10.1007/s00170-015-7265-1

Gain AK; Zhang L, 2015, 'Growth mechanism of intermetallic compound and mechanical properties of nickel (Ni) nanoparticle doped low melting temperature tin–bismuth (Sn–Bi) solder', Journal of Materials Science: Materials in Electronics, http://dx.doi.org/10.1007/s10854-015-3817-2

Gain AK; Zhang L; Chan YC, 2015, 'Microstructure, elastic modulus and shear strength of alumina (Al2O3) nanoparticles-doped tin–silver–copper (Sn–Ag–Cu) solders on copper (Cu) and gold/nickel (Au/Ni)-plated Cu substrates', Journal of Materials Science: Materials in Electronics, vol. 26, pp. 7039 - 7048, http://dx.doi.org/10.1007/s10854-015-3325-4

Gain AK; Zhang L; Liu W, 2015, 'Microstructure and material properties of porous hydroxyapatite-zirconia nanocomposites using polymethyl methacrylate powders', Materials and Design, vol. 67, pp. 136 - 144, http://dx.doi.org/10.1016/j.matdes.2014.11.028

He Z; Fu J; Zhang L; Yao X, 2015, 'A new error measurement method to identify all six error parameters of a rotational axis of a machine tool', International Journal of Machine Tools and Manufacture, vol. 88, pp. 1 - 8, http://dx.doi.org/10.1016/j.ijmachtools.2014.07.009

Li J; Fang Q; Liu Y; Zhang L, 2015, 'Scratching of copper with rough surfaces conducted by diamond tip simulated using molecular dynamics', International Journal of Advanced Manufacturing Technology, vol. 77, pp. 1057 - 1070, http://dx.doi.org/10.1007/s00170-014-6536-6

Li J; Fang Q; Zhang L; Liu Y, 2015, 'Subsurface damage mechanism of high speed grinding process in single crystal silicon revealed by atomistic simulations', Applied Surface Science, vol. 324, pp. 464 - 474, http://dx.doi.org/10.1016/j.apsusc.2014.10.149

Li J; Fang Q; Zhang L; Liu Y, 2015, 'The effect of rough surface on nanoscale high speed grinding by a molecular dynamics simulation', Computational Materials Science, vol. 98, pp. 252 - 262, http://dx.doi.org/10.1016/j.commatsci.2014.10.069

Liu M; Nguyen T; Zhang L; Wu Q; Sun D, 2015, 'Effect of grinding-induced cyclic heating on the hardened layer generation in the plunge grinding of a cylindrical component', International Journal of Machine Tools and Manufacture, vol. 89, pp. 55 - 63, http://dx.doi.org/10.1016/j.ijmachtools.2014.11.003

Liu W; Zhang L, 2015, 'Thermoforming mechanism of precision glass moulding', Applied Optics, vol. 54, pp. 6841 - 6849, http://dx.doi.org/10.1364/AO.54.006841

Liu YT; Zhang L, 2015, 'An investigation into the aspheric ultraprecision machining using the response surface methodology', Precision Engineering, http://dx.doi.org/10.1016/j.precisioneng.2015.12.006

Mylvaganam K; Zhang L, 2015, 'Effect of crystal orientation on the formation of bct-5 silicon', Applied Physics A: Materials Science and Processing, vol. 120, pp. 1391 - 1398, http://dx.doi.org/10.1007/s00339-015-9323-9

Mylvaganam K; Zhang L; Zhang Y, 2015, 'Stress-induced phase and structural changes in KDP crystals', Computational Materials Science, vol. 109, pp. 359 - 366, http://dx.doi.org/10.1016/j.commatsci.2015.07.044

Rahaman ML; Zhang LC; Liu M; Liu W, 2015, 'Surface roughness effect on the friction and wear of bulk metallic glasses', Wear, vol. 332-333, pp. 1231 - 1237, http://dx.doi.org/10.1016/j.wear.2014.11.030

Xu WX; Zhang LC, 2015, 'Ultrasonic vibration-assisted machining: principle, design and application', Advances in Manufacturing, vol. 3, pp. 173 - 192, http://dx.doi.org/10.1007/s40436-015-0115-4

Chen J; Fang Q; Zhang L, 2014, 'Investigate on distribution and scatter of surface residual stress in ultra-high speed grinding', The International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-014-6128-5

Chen YQ; Liu W; Feng HB; Zhang LC, 2014, 'Failure mechanisms of CVD diamond wafers and thin films during polishing', Machining Science and Technology, vol. 19, pp. 152 - 173, http://dx.doi.org/10.1080/10910344.2014.991030

Cui DD; Mylvaganam K; Zhang LC; Liu WD, 2014, 'Some critical issues for a reliable molecular dynamics simulation of nano-machining', Computational Materials Science, vol. 90, pp. 23 - 31, http://dx.doi.org/10.1016/j.commatsci.2014.03.063

Cui DD; Zhang LC; Mylvaganam K, 2014, 'Nano-milling on copper: Grooving quality and critical depth of cut', Journal of Computational and Theoretical Nanoscience, vol. 11, pp. 964 - 970, http://dx.doi.org/10.1166/jctn.2014.3451

Ding W; Zhang L; Liu W, 2014, 'Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels', Wear, vol. 332-333, pp. 800 - 809, http://dx.doi.org/10.1016/j.wear.2014.12.008

Fang Q; Zhang L; Liu Y, 2014, 'Influence of grain boundary sliding and grain size on dislocation emission from a crack tip', International Journal of Damage Mechanics, vol. 23, pp. 192 - 202, http://dx.doi.org/10.1177/1056789513488010

Gain AK; Zhang L, 2014, 'Microstructure, thermal analysis and damping properties of Ag and Ni nano-particles doped Sn-8Zn-3Bi solder on OSP-Cu substrate', Journal of Alloys and Compounds, vol. 617, pp. 779 - 786, http://dx.doi.org/10.1016/j.jallcom.2014.08.076

Herasati S; Zhang L, 2014, 'A new method for characterizing and modeling the waviness and alignment of carbon nanotubes in composites', Composites Science and Technology, vol. 100, pp. 136 - 142, http://dx.doi.org/10.1016/j.compscitech.2014.06.004

Herasati S; Zhang LC, 2014, 'Elastic properties of single-walled carbon nanotube clusters: Dependence on hydrostatic pressure', Computational Materials Science, vol. 86, pp. 93 - 98, http://dx.doi.org/10.1016/j.commatsci.2014.01.037

Herasati S; Zhang LC; Ruan HH, 2014, 'A new method for characterizing the interphase regions of carbon nanotube composites', International Journal of Solids and Structures, vol. 51, pp. 1781 - 1791, http://dx.doi.org/10.1016/j.ijsolstr.2014.01.019

Jin XL; Zhang LC, 2014, 'Predicting the material removal in polishing: The applicability of two types of statistical models', Machining Science and Technology, vol. 18, pp. 199 - 220, http://dx.doi.org/10.1080/10910344.2014.897838

Li J; Fang Q; Liu Y; Zhang L, 2014, 'A molecular dynamics investigation into the mechanisms of subsurface damage and material removal of monocrystalline copper subjected to nanoscale high speed grinding', Applied Surface Science, vol. 303, pp. 331 - 343, http://dx.doi.org/10.1016/j.apsusc.2014.02.178

Liu W; Ruan H; Zhang L, 2014, 'Revealing structural relaxation of optical glass through the temperature dependence of Young's modulus', Journal of the American Ceramic Society, vol. 97, pp. 3475 - 3482, http://dx.doi.org/10.1111/jace.13179

Nguyen T; Liu M; Zhang L; Wu Q; Sun D, 2014, 'An Investigation of the Grinding-Hardening Induced by Traverse Cylindrical Grinding', Journal of Manufacturing Science and Engineering, vol. 136, pp. 051008-1 - 051008-10, http://dx.doi.org/10.1115/1.4028058

Nguyen T; Liu M; Zhang LC, 2014, 'Cooling by sub-zero cold air jet in the grinding of a cylindrical component', International Journal of Advanced Manufacturing Technology, vol. 73, pp. 341 - 352, http://dx.doi.org/10.1007/s00170-014-5819-2

Rahaman ML; Zhang L, 2014, 'On the estimation of interface temperature during contact sliding of bulk metallic glass', Wear, vol. 320, pp. 77 - 86, http://dx.doi.org/10.1016/j.wear.2014.08.009

Rahaman ML; Zhang LC; Ruan HH, 2014, 'Effects of environmental temperature and sliding speed on the tribological behaviour of a Ti-based metallic glass', Intermetallics, vol. 52, pp. 36 - 48, http://dx.doi.org/10.1016/j.intermet.2014.03.011

Tang F; Chen Y; Zhang L, 2014, 'On the generation of surface depressions in polishing polycrystalline diamond compacts', Journal of Physics D: Applied Physics, vol. 47, pp. 125301 - 125301, http://dx.doi.org/10.1088/0022-3727/47/12/125301

Tang F; Zhang L, 2014, 'Subsurface nanocracking in monocrystalline Si (0 0 1) induced by nanoscratching', Engineering Fracture Mechanics, http://dx.doi.org/10.1016/j.engfracmech.2014.02.016

Wu C; Zhang L; Li S; Jiang Z; Qu P, 2014, 'A novel multi-scale statistical characterization of interface pressure and friction in metal strip rolling', International Journal of Mechanical Sciences, vol. 89, pp. 391 - 402, http://dx.doi.org/10.1016/j.ijmecsci.2014.10.004

Xu W; Zhang LC, 2014, 'On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', International Journal of Machine Tools and Manufacture, vol. 80-81, pp. 1 - 10, http://dx.doi.org/10.1016/j.ijmachtools.2014.02.004

Xu W; Zhang LC; Wu Y, 2014, 'Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: Understanding the material removal mechanisms', Composites Science and Technology, vol. 92, pp. 103 - 111, http://dx.doi.org/10.1016/j.compscitech.2013.12.011

Zhang LC, 2014, 'Characterizing the Mechanical Properties of the Hardened Layer Induced by Grinding-Hardening', Machining Science and Technology, vol. 18, pp. 277 - 298, http://dx.doi.org/10.1080/10910344.2014.897845

Zhang LC, 2014, 'Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling', Materials Science and Engineering: A, vol. 613, pp. 379 - 389, http://dx.doi.org/10.1016/j.msea.2014.06.112

Zhang Y; Zhang L; Liu M; Zhang F; Mylvaganam K; Liu W, 2014, 'Understanding the friction and wear of KDP crystals by nanoscratching', Wear, vol. 332-333, pp. 900 - 906, http://dx.doi.org/10.1016/j.wear.2014.11.032

Chen Y; Tang F; Zhang LC, 2013, 'A preparation method of diamond specimens using an advanced FIB microscopy for micro and nanoanalysis', Key Engineering Materials, vol. 531-532, pp. 592 - 595, http://dx.doi.org/10.4028/www.scientific.net/KEM.531-532.592

Chen Y; Zhang LC; Feng H, 2013, 'Polishing of CVD Diamond Wafers and Films', Key Engineering Materials, vol. 531-532, pp. 373 - 376, http://dx.doi.org/10.4028/www.scientific.net/KEM.531-532.373

Fang QH; Zhang LC, 2013, 'Prediction of the threshold load of dislocation emission in silicon during nanoscratching', Acta Materialia, vol. 61, pp. 5469 - 5476, http://dx.doi.org/10.1016/j.actamat.2013.05.035

Feng H; Fang Q-H; Zhang LC; Liu YW, 2013, 'Effect of cooperative grain boundary sliding and migration on emission of dislocations from a crack tip in nanocrystalline materials', Mechanics of Materials, vol. 61, pp. 39 - 48, http://dx.doi.org/10.1016/j.mechmat.2013.02.006

Feng H; Feng Q; Zhang LC; Liu Y, 2013, 'Special rotational deformation and grain size effect on fracture toughness of nanocrystalline materials', International Journal of Plasticity, vol. 42, pp. 50 - 64, http://dx.doi.org/10.1016/j.ijplas.2012.09.015

Gao CY; Zhang LC, 2013, 'Effect of cutting conditions on the serrated chip formation in high speed cutting', Machining Science and Technology, vol. 17, pp. 26 - 40, http://dx.doi.org/10.1080/10910344.2012.747887

Herasati S; Ruan HH; Zhang LC, 2013, 'Effect of chain morphology and carbon-nanotube additives on the glass transition temperature of polyethylene', Journal of Nano Research, vol. 23, pp. 16 - 23, http://dx.doi.org/10.4028/www.scientific.net/JNanoR.23.16

Liu M; Ruan HH; Zhang LC, 2013, 'Variation of crystal quality and residual stresses in epitaxially grown thin film systems induced by ion implantation and annealing', Journal of Materials Research, vol. 28, pp. 1413 - 1419, http://dx.doi.org/10.1557/jmr.2013.117

Liu WD; Ruan HH; Zhang LC, 2013, 'Atomic rearrangements in metallic glass: Their nucleation and self-organization', Acta Materialia, vol. 61, pp. 6050 - 6060, http://dx.doi.org/10.1016/j.actamat.2013.06.046

Moridi A; Ruan H; Zhang L; Liu M, 2013, 'Residual stresses in thin film systems: Effects of lattice mismatch, thermal mismatch and interface dislocations', International Journal of Solids and Structures, vol. 50, pp. 3562 - 3569, http://dx.doi.org/10.1016/j.ijsolstr.2013.06.022

Rahaman ML; Zhang LC; Ruan HH, 2013, 'Understanding the friction and wear mechanisms of bulk metallic glass under contact sliding', Wear, vol. 304, pp. 43 - 48, http://dx.doi.org/10.1016/j.wear.2013.04.022

Soe KT; Zhang YX; Zhang LC, 2013, 'Impact resistance of hybrid-fiber engineered cementitious composite panels', Composite Structures, vol. 104, pp. 320 - 330, http://dx.doi.org/10.1016/j.compstruct.2013.01.029

Uddin MS; Zhang LC, 2013, 'Predicting the wear of hard-on-hard hip joint prostheses', Wear, vol. 301, pp. 192 - 200, http://dx.doi.org/10.1016/j.wear.2013.01.009

Xu W; liangchi zhang ; Xuyue Wang , 2013, 'Laser Bending of Silicon Sheet: Absorption Factor and Mechanisms', Journal of Manufacturing Science and Engineering, vol. 135, http://dx.doi.org/10.1115/1.4025579

Chen Y; Zhang LC; Tang F, 2012, 'Surface integrity of PCD composites generated by dynamic friction polishing: Effect of processing conditions', Diamond and Related Materials, vol. 26, pp. 25 - 31, http://dx.doi.org/10.1016/j.diamond.2012.04.002

Duan ; Zhang LC, 2012, 'A reliable method for predicting serrated chipping in high speed cutting: analysis and experimental verification', International Journal of Advanced Manufacturing Technology, vol. online, pp. 1 - 11, http://dx.doi.org/10.1007/s00170-012-4125-0

Duan CZ; Zhang LC, 2012, 'Adiabatic Shear Banding in AISI 1045 Steel during High Speed Machining:Mechanisms of Microstructural Evolution', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 532, pp. 111 - 119, http://dx.doi.org/10.1016/j.msea.2011.10.071

Gao CY; Liu PH; Zhang LC, 2012, 'An explicit integration algorithm for introducing user-defined thermo-viscoplastic constitutive models in FE simulations.', Materials Science Forum, vol. 697 - 698, pp. 204 - 207, http://dx.doi.org/10.4028/www.scientific.net/MSF.697-698.204

Gao CY; Lu W; Zhang LC; Yan HX, 2012, 'A constitutive description of the thermo-viscoplastic behaviour of body-centered cubic metals', Materials and Design, vol. 36, pp. 671 - 678, http://dx.doi.org/10.1016/j.matdes.2011.12.012

Gao CY; Zhang LC, 2012, 'Constitutive modelling of plasticity of fcc metals under extremely high strain rates', International Journal of Plasticity, vol. 32-33, pp. 121 - 133, http://dx.doi.org/10.1016/j.ijplas.2011.12.001

Jin X; Zhang LC, 2012, 'A statistical model for material removal prediction in polishing', Wear, vol. 274-275, pp. 203 - 211, http://dx.doi.org/10.1016/j.wear.2011.08.028

Tang F; Chen Y; Zhang LC, 2012, 'Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy', Philosophical Magazine, vol. 92, pp. 1680 - 1690, http://dx.doi.org/10.1080/14786435.2012.657706

Xu W; Zhang LC; Wu YB, 2012, 'Micromechanical Modelling of Elliptic Vibration-Assisted Cutting of Unidirectional FRP Composites', Advanced Materials Research, vol. 591-593, pp. 531 - 534, http://dx.doi.org/10.4028/www.scientific.net/AMR.591-593.531

Bao R; Zhang LC; Yao Q; Lunn L, 2011, 'Estimating the Peak Indentation Force of the Edge Chipping of Rocks Using Single Point-Attack Pick', Rock Mechanics and Rock Engineering, vol. 44, pp. 339 - 347, http://dx.doi.org/10.1007/s00603-010-0133-2

Cui D; Mylvaganam K; Zhang LC, 2011, 'Nano-Grooving on Copper by Nano-Milling and Nano-Cutting', Advanced Materials Research, vol. 325, pp. 576 - 581, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.576

Duan CZ; Zhang LC; Yu HY; Wang MJ, 2011, 'An investigation into the microstructure of adiabatic shear banding in AISI 1045 hardened steel due to high speed machining', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 154-155, pp. 321 - 324, http://dx.doi.org/10.4028/www.scientific.net/AMR.154-155.321

Gao CY; Zhang LC; Yan HX, 2011, 'A new constitutive model for HCP metals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 528, pp. 4445 - 4452, http://dx.doi.org/10.1016/j.msea.2011.02.053

Gu Y; Wang W; Zhang LC; Feng X, 2011, 'An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields', Engineering Fracture Mechanics, vol. 78, pp. 175 - 190, http://dx.doi.org/10.1016/j.engfracmech.2010.10.014

Mylvaganam K; Zhang LC, 2011, 'Nanotwinning in monocrystalline silicon upon nanoscratching', Scripta Materialia, vol. 65, pp. 214 - 216, http://dx.doi.org/10.1016/j.scriptamat.2011.04.012

Nguyen T; Zhang LC, 2011, 'Realisation of grinding-hardening in workpieces of curved surfaces. Part 1: plunge cylindrical grinding', International Journal of Machine Tools and Manufacture, vol. 51, pp. 309 - 319, http://dx.doi.org/10.1016/j.ijmachtools.2010.12.006

Ruan H; Zhang LC, 2011, 'A Monte-Carlo approach for modeling glass transition', Journal of the American Ceramic Society, vol. 94, pp. 3350 - 3358, http://dx.doi.org/10.1111/j.1551-2916.2011.04784.x

Wang Y; Zhang LC; Biddut AQ, 2011, 'Chemical effect on the material removal rate in the CMP of silicon wafers', Wear, vol. 270, pp. 312 - 316, http://dx.doi.org/10.1016/j.wear.2010.11.006

Chen Y; Zhang LC, 2010, 'Fast polishing of single crystal diamond', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 97-101, pp. 4096 - 4099, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4096

Gao C; Zhang LC, 2010, 'A constitutive model for dynamic plasticity of F.C.C. metals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 527, pp. 3138 - 3143, http://dx.doi.org/10.1016/j.msea.2010.01.083

Nguyen T; Zhang LC, 2010, 'Grinding–hardening using dry air and liquid nitrogen: Prediction and verification of temperature fields and hardened layer thickness', International Journal of Machine Tools and Manufacture, vol. 50, pp. 901 - 910, http://dx.doi.org/10.1016/j.ijmachtools.2010.06.002

Pramanik A; Zhang LC; Chen Y, 2010, 'Efficient machining of artificial hip joint components', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 97-101, pp. 2269 - 2272, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.2269

Uddin MS; Zhang LC, 2010, 'Minimizing stress concentrations in the femoral heads of hip joint prostheses: effect of borehole shapes', Key Engineering Materials, vol. 443, pp. 736 - 741, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.736

Wang Y; Zhang LC, 2010, 'A review on the CMP of SiC and sapphire wafers', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 126-128, pp. 429 - 434, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.429

Wang Y; Zhang LC, 2010, 'On the Chemo-Mechanical Polishing for Nano-Scale Surface Finish of Brittle Wafers', Recent Patents on Nanatechnology, vol. 4, pp. 70 - 77(8), http://dx.doi.org/10.2174/187221010791208812

Wu Y; Huang H; Zou ; Zhang LC; Dell , 2010, 'Nanoscratch-induced phase transformation of monocrystalline Si', Scripta Materialia, vol. 63, pp. 847 - 850, http://dx.doi.org/10.1016/j.scriptamat.2010.06.034

Yao Q; Zhang LC; Bao R; Lunn J; Melmeth C, 2010, 'Edge chipping of rock: An experimental study', Key Engineering Materials, vol. 443, pp. 456 - 461, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.456

Zhang LC; Biddut A; Ali Y, 2010, 'Dependence of pad performance on its texture in polishing mono-crystalline silicon wafers', International Journal of Mechanical Sciences, vol. 52, pp. 657 - 662, http://dx.doi.org/10.1016/j.ijmecsci.2009.09.017

Chang L; Zhang LC, 2009, 'Deformation mechanisms at pop-out in monocrystalline silicon under nanoindentation', ACTA Materialia, vol. 57, pp. 2148 - 2153, http://dx.doi.org/10.1016/j.actamat.2009.01.008

Chen Y; Nguyen T; Zhang LC, 2009, 'Polishing of Polycrystalline Diamond by the Technique of Dynamic Friction, Part 5: Quantitative analysis of material removal', International Journal of Machine Tools and Manufacture, vol. 49, pp. 515 - 520, http://dx.doi.org/10.1016/j.ijmachtools.2008.12.012

Chen Y; Zhang LC, 2009, 'On the Polishing Techniques of Diamond and Diamond Composites', Key Engineering Materials, vol. 404, pp. 85 - 96, http://dx.doi.org/10.4028/www.scientific.net/KEM.404.85

Chen Y; Zhang LC, 2009, 'Polishing of polycrystalline diamond by the technique of dynamic friction, Part 4: establishing the polishing map', International Journal of Machine Tools and Manufacture, vol. 49, pp. 309 - 314, http://dx.doi.org/10.1016/j.ijmachtools.2008.10.010

Mylvaganam K; Zhang LC; Eyben P; Mody J; Vandervorst W, 2009, 'Evolution of the metastable phases in silicon during nanoindentation: Mechanism analysis and experimental verification', Nanotechnology, vol. 20, pp. 1 - 8, http://dx.doi.org/10.1088/0957-4484/20/30/305705

Mylvaganam K; Zhang LC; Xiao KQ, 2009, 'Origin of friction in films of horizontally oriented carbon nanotubes sliding against diamond', Carbon, vol. 47, pp. 1693 - 1700, http://dx.doi.org/10.1016/j.carbon.2009.02.020

Nguyen T; Zhang LC, 2009, 'Performance of a new segmented grinding wheel system', International Journal of Machine Tools and Manufacture, vol. 49, pp. 291 - 296, http://dx.doi.org/10.1016/j.ijmachtools.2008.10.015

Nguyen T; Zhang LC, 2009, 'Temperature fields in workpieces during grinding-hardening with dry air and liquid nitrogen as the cooling media', Advanced Materials Research, vol. 76-78, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.3

Wang CY; Mylvaganam K; Zhang LC, 2009, 'Wrinkling of monolater graphene: A study by molecular dynamics and continuum plate theory', Physical Review - Section B - Condensed Matter, vol. 80, pp. 1 - 4, http://dx.doi.org/10.1103/PhysRevB.80.155445

Zhang LC, 2009, 'On the mechanics of single-walled carbon nanotubes', Journal of Materials Processing Technology, vol. 209, pp. 4223 - 4228, http://dx.doi.org/10.1016/j.jmatprotec.2008.10.024

Zhang LC; Chang LT, 2009, 'Mechanical behavior characterization of silicon and effect of loading rate on pop-in: a nanoindentation study under ultra-low loads', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol. 506, pp. 125 - 129, http://dx.doi.org/10.1016/j.msea.2008.11.021

Zhang LC; Chang LT, 2009, 'The Deformation Mechanism at Pop-In: Monocrystalline Silicon under Nanoindentation with a Berkovich Indenter', Key Engineering Materials, vol. 389-390, pp. 453 - 458, http://dx.doi.org/10.4028/www.scientific.net/KEM.389-390.453

Zhang LC; Kiat EC; Pramanik A, 2009, 'A briefing on the manufacture of hip joint prostheses', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), vol. 76-78, pp. 212 - 216, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.212

Chen Y; Zhang LC; Arsecularatne JA, 2008, 'Optical surface finish of PCD composites by dynamic friction polishing', Key Engineering Materials, vol. 364-366, pp. 226 - 231, http://dx.doi.org/10.4028/www.scientific.net/KEM.364-366.226

Gu Y; Zhang LC, 2008, 'Coupling of the meshfree and finite element methods for determination of the crack tip fields', Engineering Fracture Mechanics, vol. 75, pp. 986 - 1004, http://dx.doi.org/10.1016/j.engfracmech.2007.05.003

Pramanik A; Arsecularatne JA; Zhang LC, 2008, 'Machining of particulate-reinforced metal matrix composites', Machining: Fundamentals and Recent Advances, pp. 127 - 166, http://dx.doi.org/10.1007/978-1-84800-213-5_5

Pramanik A; Zhang LC; Arsecularatne JA, 2008, 'Deformation mechanisms of MMCs under indentation', Composites Science and Technology, vol. 68, pp. 1304 - 1312, http://dx.doi.org/10.1016/j.compscitech.2007.12.008

Pramanik A; Zhang LC; Arsecularatne JA, 2008, 'Machining of metal matrix composites: effect of ceramic particles on residual stress, surface roughness and chip formation', International Journal of Machine Tools and Manufacture, vol. 48, pp. 1613 - 1625, http://dx.doi.org/10.1016/j.ijmachtools.2008.07.008

Qu WG; Zheng YQ; Ma WD; Qiu G; Zhang LC; Li Y; Qu Z; Wang X, 2008, 'Distraction osteogenesis for the treatment of temporomandibular joint ankylosis in 12 cases', Journal of Clinical Rehabilitative Tissue Engineering Research, vol. 12, pp. 1357 - 1359

Wang C; Zhang LC, 2008, 'A critical assessment of the elastic properties and effective wall thickness of single-walled carbon nanotubes', Nanotechnology, vol. 19, http://dx.doi.org/10.1088/0957-4484/19/7/075705

Wang C; Zhang LC, 2008, 'An elastic shell model for characterizing single-walled carbon nanotubes', Nanotechnology, vol. 19 (2008) 195704, http://dx.doi.org/10.1088/0957-4484/19/19/195704

Wang C; Zhang LC, 2008, 'Circumferential vibration of microtubules with long axial wavelength', Journal of Biomechanics, vol. 41, pp. 1892 - 1896, http://dx.doi.org/10.1016/j.jbiomech.2008.03.029

Wu C; Zhang LC; Ramaswamy Y; Gale D; Yang W; Xiao K; Yin Y; Zreiqata H, 2008, 'Novel sphene coatings on Ti–6Al–4V for orthopaedic implants using sol–gel method', ACTA Biomaterialia, vol. 4, pp. 569 - 576, http://dx.doi.org/10.1016/j.actbio.2007.11.005

Chen Y; Zhang LC; Arsecularatne JA, 2007, 'Polishing of polycrystalline diamond by the technique of dynamic friction. Part 2: Material removal mechanism', International Journal of Machine Tools and Manufacture, vol. 47, pp. 1615 - 1624, http://dx.doi.org/10.1016/j.ijmachtools.2006.11.003

Chen Y; Zhang LC; Arsecularatne JA; Zarudi I, 2007, 'Polishing of polycrystalline diamond by the technique of dynamic friction, part 3: Mechanism exploration through debris analysis', International Journal of Machine Tools and Manufacture, vol. 47, pp. 2282 - 2289, http://dx.doi.org/10.1016/j.ijmachtools.2007.06.004

Mylvaganam K; Zhang LC, 2007, 'Ballistic resistance capacity of carbon nanotubes', Nanotechnology, vol. 18, http://dx.doi.org/10.1088/0957-4484/18/47/475701

Mylvaganam K; Zhang LC, 2007, 'Fabrication and application of polymer composites comprising carbon nanotubes', Recent Patents on Nanotechnology, vol. 1, pp. 59 - 65, http://dx.doi.org/10.2174/187221007779814826

Nguyen T; Zarudi I; Zhang LC, 2007, 'Grinding-hardening with liquid nitrogen: Mechanisms and technology', International Journal of Machine Tools and Manufacture, vol. 47, pp. 97 - 106, http://dx.doi.org/10.1016/j.ijmachtools.2006.02.010

Pramanik A; Zhang LC; Arsecularatne JA, 2007, 'An FEM investigation into the behavior of metal matrix composites: Tool-particle interaction during orthogonal cutting', International Journal of Machine Tools and Manufacture, vol. 47, pp. 1497 - 1506, http://dx.doi.org/10.1016/j.ijmachtools.2006.12.004

Pramanik A; Zhang LC; Arsecularatne JA, 2007, 'Micro-indentation of metal matrix composite - An FEM investigation', Key Engineering Materials, vol. 340-341 I, pp. 563 - 570, http://dx.doi.org/10.4028/0-87849-433-2.563

Vodenitcharova T; Zhang LC; Zarudi I; Yin Y; Domyo H; Ho T; Sato M, 2007, 'The effect of anisotropy on the deformation and fracture of sapphire wafers subjected to thermal shocks', Journal of Materials Processing Technology, vol. 194, pp. 52 - 62, http://dx.doi.org/10.1016/j.jmatprotec.2007.03.125

Xiao KQ; Zhang LC; Zarudi I, 2007, 'Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites', Composites Science and Technology, vol. 67, pp. 177 - 182, http://dx.doi.org/10.1016/j.compscitech.2006.07.027

Arsecularatne JA; Zhang LC; Montross C, 2006, 'Wear and tool life of tungsten carbide, PCBN and PCD cutting tools', International Journal of Machine Tools and Manufacture, vol. 46, pp. 482 - 491, http://dx.doi.org/10.1016/j.ijmachtools.2005.07.015

Arsecularatne JA; Zhang LC; Montross C; Mathew P, 2006, 'On machining of hardened AISI D2 steel with PCBN tools', Journal of Materials Processing Technology, vol. 171, pp. 244 - 252, http://dx.doi.org/10.1016/j.jmatprotec.2005.06.079

Chen Y; Zhang LC; Arsecularatne JA; Montross C, 2006, 'Polishing of polycrystalline diamond by the technique of dynamic friction, part 1: Prediction of the interface temperature rise', International Journal of Machine Tools and Manufacture, vol. 46, pp. 580 - 587, http://dx.doi.org/10.1016/j.ijmachtools.2005.07.018

Gu YT; Zhang LC, 2006, 'A concurrent multiscale method based on the meshfree method and molecular dynamics analysis', Multiscale Modeling and Simulation, vol. 5, pp. 1128 - 1155, http://dx.doi.org/10.1137/060654232

Guo L; Zi YW; Lin H; Wei EC; Chen J; Liu M; Zhang LC; Li JQ; Gu H, 2006, 'Expression and functional analysis of the rice plasma-membrane intrinsic protein gene family', Cell Research, vol. 16, pp. 277 - 286, http://dx.doi.org/10.1038/sj.cr.7310035

Guo YP; Hu MJ; Zhou HF; Zhang LC; Su JH; Wang HW; Shen YG, 2006, 'Low concentrations of NaHSO3 increase photosynthesis, biomass, and attenuate photoinhibition in Satsuma mandarin (Citrus unshiu Marc.) plants', Photosynthetica, vol. 44, pp. 333 - 337, http://dx.doi.org/10.1007/s11099-006-0032-7

Guo YP; Zhou HF; Zhang LC, 2006, 'Photosynthetic characteristics and protective mechanisms against photooxidation during high temperature stress in two citrus species', Scientia Horticulturae, vol. 108, pp. 260 - 267, http://dx.doi.org/10.1016/j.scienta.2006.01.029

Mylvaganam K; Vodenitcharova T; Zhang LC, 2006, 'The bending-kinking analysis of a single-walled carbon nanotube-a combined molecular dynamics and continuum mechanics technique', Journal of Materials Science, vol. 41, pp. 3341 - 3347, http://dx.doi.org/10.1007/s10853-005-5389-7

Pramanik A; Zhang LC; Arsecularatne JA, 2006, 'Prediction of cutting forces in machining of metal matrix composites', International Journal of Machine Tools and Manufacture, vol. 46, pp. 1795 - 1803, http://dx.doi.org/10.1016/j.ijmachtools.2005.11.012

Vodenitcharova T; Zhang LC, 2006, 'Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube', International Journal of Solids and Structures, vol. 43, pp. 3006 - 3024, http://dx.doi.org/10.1016/j.ijsolstr.2005.05.014

Xiao KQ; Zhang LC, 2006, 'The effect of compressed cold air and vegetable oil on the subsurface residual stress of ground tool steel', Journal of Materials Processing Technology, vol. 178, pp. 9 - 13, http://dx.doi.org/10.1016/j.jmatprotec.2005.05.013

Zhang LC; Zarudi I; Xiao KQ, 2006, 'Novel behaviour of friction and wear of epoxy composites reinforced by carbon nanotubes', Wear, vol. 261, pp. 806 - 811, http://dx.doi.org/10.1016/j.wear.2006.01.033

Ali YM; Zhang LC, 2005, 'Relativistic heat conduction', International Journal of Heat and Mass Transfer, vol. 48, pp. 2397 - 2406, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2005.02.003

Tang CY; Zhang LC, 2005, 'A molecular dynamics analysis of the mechanical effect of water on the deformation of silicon monocrystals subjected to nano-indentation', Nanotechnology, vol. 16, pp. 15 - 20, http://dx.doi.org/10.1088/0957-4484/16/1/004

Zarudi I; Nguyen T; Zhang LC, 2005, 'Effect of temperature and stress on plastic deformation in monocrystalline silicon induced by scratching', Applied Physics Letters, vol. 86, http://dx.doi.org/10.1063/1.1847692

Zarudi I; Zhang LC; Cheong WCD; Yu TX, 2005, 'The difference of phase distributions in silicon after indentation with Berkovich and spherical indenters', Acta Materialia, vol. 53, pp. 4795 - 4800, http://dx.doi.org/10.1016/j.actamat.2005.06.030

Ali YM; Zhang LC, 2004, 'A fuzzy model for predicting burns in surface grinding of steel', International Journal of Machine Tools and Manufacture, vol. 44, pp. 563 - 571, http://dx.doi.org/10.1016/j.ijmachtools.2003.10.030

Hu NS; Zhang LC, 2004, 'Some observations in grinding unidirectional carbon fibre-reinforced plastics', Journal of Materials Processing Technology, vol. 152, pp. 333 - 338, http://dx.doi.org/10.1016/j.jmatprotec.2004.04.374

Mylvaganam K; Zhang LC, 2004, 'Chemical bonding in polyethylene-nanotube composites: A quantum mechanics prediction', Journal of Physical Chemistry B, vol. 108, pp. 5217 - 5220, http://dx.doi.org/10.1021/jp037619i

Mylvaganam K; Zhang LC, 2004, 'Important issues in a molecular dynamics simulation for characterising the mechanical properties of carbon nanotubes', Carbon, vol. 42, pp. 2025 - 2032, http://dx.doi.org/10.1016/j.carbon.2004.04.004

Mylvaganam K; Zhang LC, 2004, 'Nanotube functionalization and polymer grafting: An ab initio study', Journal of Physical Chemistry B, vol. 108, pp. 15009 - 15012, http://dx.doi.org/10.1021/jp048061x

Vodenitcharova T; Zhang LC, 2004, 'A new constitutive model for the phase transformations in mono-crystalline silicon', International Journal of Solids and Structures, vol. 41, pp. 5411 - 5424, http://dx.doi.org/10.1016/j.ijsolstr.2004.04.025

Xiao KQ; Zhang LC, 2004, 'The stress transfer efficiency of a single-walled carbon nanotube in epoxy matrix', JOURNAL OF MATERIALS SCIENCE, vol. 39, pp. 4481 - 4486, http://dx.doi.org/10.1023/B:JMSC.0000034141.48785.d2

Zarudi I; Zhang LC; Zou J; Vodenitcharova T, 2004, 'The R8-BC8 phases and crystal growth in monocrystalline silicon under microindentation with a spherical indenter', Journal of Materials Research, vol. 19, pp. 332 - 337, http://dx.doi.org/10.1557/jmr.2004.19.1.332

Zarudi I; Zou J; McBride W; Zhang LC, 2004, 'Amorphous structures induced in monocrystalline silicon by mechanical loading', Applied Physics Letters, vol. 85, pp. 932 - 934, http://dx.doi.org/10.1063/1.1779344

Vodenitcharova T; Zhang C, 2003, 'Effective wall thickness of a single-walled carbon nanotube', Physical Review B - Condensed Matter and Materials Physics, vol. 68, http://dx.doi.org/10.1103/PhysRevB.68.165401

Vodenitcharova T; Zhang LC, 2003, 'A mechanics prediction of the behaviour of mono-crystalline silicon under nano-indentation', International Journal of Solids and Structures, vol. 40, pp. 2989 - 2998, http://dx.doi.org/10.1016/S0020-7683(03)00119-7

Wang XM; Zhang LC, 2003, 'An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics', International Journal of Machine Tools and Manufacture, vol. 43, pp. 1015 - 1022, http://dx.doi.org/10.1016/S0890-6955(03)00090-7

Zarudi I; Zhang LC; Swain MV, 2003, 'Microstructure evolution in monocrystalline silicon in cyclic microindentations', Journal of Materials Research, vol. 18, pp. 758 - 761, http://dx.doi.org/10.1557/JMR.2003.0104

Zarudi I; Zou J; Zhang LC, 2003, 'Microstructures of phases in indented silicon: A high resolution characterization', Applied Physics Letters, vol. 82, pp. 874 - 876, http://dx.doi.org/10.1063/1.1544429

H.S. L; K. F; A. SK; M. R, 2002, 'A fundamental study on the mechanism of electrolytic in-process dressing (ELID) grinding', International Journal of Machine Tools and Manufacture, vol. 42, pp. 935 - 943, http://dx.doi.org/10.1016/S0890-6955(02)00023-8

Mylvaganam K; Zhang LC, 2002, 'Effect of oxygen penetration in silicon due to nano-indentation', Nanotechnology, vol. 13, pp. 623 - 626, http://dx.doi.org/10.1088/0957-4484/13/5/316

Xiao KQ; Zhang LC, 2002, 'The role of viscous deformation in the machining of polymers', International Journal of Mechanical Sciences, vol. 44, pp. 2317 - 2336, http://dx.doi.org/10.1016/S0020-7403(02)00178-9

Zarudi I; Zhang LC, 2002, 'A revisit to some wheel-workpiece interaction problems in surface grinding', International Journal of Machine Tools and Manufacture, vol. 42, pp. 905 - 913, http://dx.doi.org/10.1016/S0890-6955(02)00024-X

Zarudi I; Zhang LC, 2002, 'Mechanical property improvement of quenchable steel by grinding', Journal of Materials Science, vol. 37, pp. 3935 - 3943, http://dx.doi.org/10.1023/A:1019671926384

Ali YM; Zhang LC, 2001, 'A methodology for fuzzy modeling of engineering systems', FUZZY SETS AND SYSTEMS, vol. 118, pp. 181 - 197, http://dx.doi.org/10.1016/S0165-0114(98)00272-3

Zhang L; Sazonov V; Kent J; Dixon T; Novozhilov V, 2001, 'Analysis of boiler-tube erosion by the technique of acoustic emission - Part I. Mechanical erosion', WEAR, vol. 250, pp. 762 - 769, http://dx.doi.org/10.1016/S0043-1648(01)00714-1

Zhang LC; Johnson KL; Cheong WCD, 2001, 'A molecular dynamics study of scale effects on the friction of single-asperity contacts', TRIBOLOGY LETTERS, vol. 10, pp. 23 - 28, http://dx.doi.org/10.1023/A:1009038715458

Zhang LC; Zarudi I, 2001, 'Towards a deeper understanding of plastic deformation in mono-crystalline silicon', INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol. 43, pp. 1985 - 1996, http://dx.doi.org/10.1016/S0020-7403(01)00024-8

Cheong WCD; Zhang LC, 2000, 'Molecular dynamics simulation of phase transformations in silicon monocrystals due to nano-indentation', NANOTECHNOLOGY, vol. 11, pp. 173 - 180, http://dx.doi.org/10.1088/0957-4484/11/3/307

Sun J; Zhang LC; Mai YW; Gal JA; Hogg M; Payor S, 2000, 'Computational modelling of a precision optical lens polishing process on small radius spherical surfaces', Journal of Materials Processing Technology, vol. 105, pp. 204 - 213, http://dx.doi.org/10.1016/S0924-0136(00)00623-3

Sun J; Zhang LC; Mai YW; Payor S; Hogg M, 2000, 'Material removal in the optical polishing of hydrophilic polymer materials', Journal of Materials Processing Technology, vol. 103, pp. 230 - 236, http://dx.doi.org/10.1016/S0924-0136(00)00505-7

Ali YM; Zhang LC, 1999, 'Surface roughness prediction of ground components using a fuzzy logic approach', Journal of Materials Processing Technology, vol. 89-90, pp. 561 - 568, http://dx.doi.org/10.1016/S0924-0136(99)00022-9

Zhang LC; Tanaka H, 1999, 'On the mechanics and physics in the nano-indentation of silicon monocrystals', JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, vol. 42, pp. 546 - 559, http://dx.doi.org/10.1299/jsmea.42.546

Zhang ZF; Zhang LC; Mai YW, 1995, 'Wear of ceramic particle-reinforced metal-matrix composites - Part I Wear mechanisms', Journal of Materials Science, vol. 30, pp. 1961 - 1966, http://dx.doi.org/10.1007/BF00353018

Wu CH; Zhang LC; Qu PL; Li SQ; Jiang ZL; Wang Y, 2020, 'Effects of Lubrication and Temperature on the Tribological Behavior of a Magnesium Alloy under Contact Sliding', in IOP Conference Series: Materials Science and Engineering, http://dx.doi.org/10.1088/1757-899X/967/1/012018

Gain AK; Zhang L, 2016, 'Harsh service environment effects on the microstructures and mechanical properties of environmentally friendly Sn-based solder alloys for green electronics', Vol. 88, presented at International Conference on Biomaterials, Nanomaterials and Composite Materials (CBNCM 2016), Chengdu, China, 04 November 2016 - 06 November 2016

Hou N; Zhang Y; Zhang L; Mylvaganam K; Wei J; Zhang F, 2016, 'An investigation on the surface/subsurface defects in potassium dihydrogen phosphate crystals after fly-cutting', in Jiang W; Yang L; Riemer O; Li S; Wan Y (eds.), Proceedings of SPIE - The International Society for Optical Engineering, SPIE-INT SOC OPTICAL ENGINEERING, Suzhou, PEOPLES R CHINA, presented at 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies - Advanced Optical Manufacturing Technologies, Suzhou, PEOPLES R CHINA, 26 April 2016 - 29 April 2016, http://dx.doi.org/10.1117/12.2243806

Gain AK; Zhang L, 2015, 'Porous titanium (Ti)-based nanocomposites for load–bearing bioimplants', in EMN (Energy Materials Nanotechnology) Phuket Meeting, Asit Kumar Gain, Phuket, Thailand, presented at Asit Kumar Gain, Phuket, Thailand, 04 May 2015 - 07 May 2015

Xu W; Zhang L, 2015, 'Modelling the bending-dominated fibre fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', in Matsubara A (ed.), Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, presented at The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Kyoto, Japan, 18 October 2015 - 22 October 2015

Zhang L; Xu W, 2015, 'A Microstructure-based Finite Element Modelling of the Surface Defect Formation in the Cutting of SiCp/Al Composites', in Matsubara A (ed.), Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, presented at The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Kyoto, Japan, 18 October 2015 - 22 October 2015

Ding WF; Dai JB; Zhang LC; Xu JH, 2014, 'An investigation on the chip formation and forces in the grinding of Inconel718 alloy using the single-grain method', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 /​ National Committee on Applied Mechanics of Engineers Australia, Barton, A.C.T. Engineers Australia, Melbourne, pp. 851 - 858, presented at The 8th Australasian Congress on Applied Mechanics 2014, Melbourne, 24 December 2014 - 26 December 2014

Xu W; Zhang L, 2014, 'A Finite Element Analysis Of The Fibre Fracture In A Polymer Composite During Vibration-Assisted Cutting', in Das ; John (ed.), The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8, Australasian Congress on Applied Mechanics, Engineers Australia. National Committee on Applied Mechanics, Melbourne, pp. 1013 - 1020, presented at 8th Australasian Congress on Applied Mechanics (ACAM 8), Melbourne, 23 November 2014 - 26 November 2014

Xu WX; Zhang LC, 2014, 'Effect of Frequency and Amplitude on the Performance of Elliptic Vibration-Assisted Cutting of Fibre-Reinforced Polymer Composites', in Advanced Materials Research, pp. 753 - 757, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.753

Mylvaganam K; Zhang LC, 2012, 'Effect residual stresses on the stability of bct-5 silicon', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, Wollongong Conference Organiser, Wollongong, Australia, pp. 1 - 6, presented at 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, Sydney, 23 September 2012 - 26 September 2012, http://dx.doi.org/10.1016/j.commatsci.2013.06.052

Peng J; Zhang LC; Lu XY, 2012, 'Elastic-plastic deformation of KDP crystals under nanoindentation', in Tieu AK; Zhu H; Zhu Q (eds.), Proceedings of the 15th International Conference on Advances in Materials and Processing Technologies, The Conference Organising Committee, Wollongong, pp. 705 - 711, presented at 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, Sydney, 23 September 2012 - 26 September 2012, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.705

Yao Q; Ruan H; Zhang L, 2012, 'A method for estimating the fracture toughness of rocks', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 895 - 904

Mostafavi SS; Yao Q; Zhang LC; Li ; Lunn L; Melmeth C, 2011, 'Effect of attack angle on the pick performance in linear rock cutting', in US Rock Mechanics / Geomechanics Symposium, American Rock Mechanics Association, USA, pp. 1312 - 1315, presented at Proceedings of the 45th US Rock Mechanics / Geomechanics Symposium, San Francisco, USA (Paper Number 596), 26 June 2011 - 29 June 2011, http://www.onepetro.org/mslib/servlet/onepetropreview?id=ARMA-11-596

Uddin MS; Zhang LC, 2011, 'Contact Stresses in PCD-on-PCD Hip Joint Prostheses', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 135 - 143, presented at 7th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Milan, Italy, 04 July 2011 - 08 July 2011

Yao Q; Mostafavi SS; Bao R; Zhang LC; Lunn L; Melmeth C, 2011, 'Pick profile effect on linear cutting of sandstones', in US Rock Mechanics / Geomechanics Symposium, American Rock Mechanics Association, USA, pp. 2163 - 2167, presented at Proceedings of the 45th US Rock Mechanics / Geomechanics Symposium, San Francisco, USA (Paper Number 596), 26 June 2011 - 29 June 2011, http://www.proceedings.com/12753.html

Yao Q; Zhang LC; Mostafavi SS; Bao R; Lunn L; Melmeth C, 2011, 'Wear performance of PCD and WC mining picks', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 173 - 177, presented at 7th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Milan, Italy, 04 July 2011 - 08 July 2011

Chen Y; Zhang LC, 2010, 'Quality Verification of Polished PCD Composites by Examining the Phase transformations', in IUTAM Bookseries, Beijing, China, pp. 147 - 156, presented at IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, Beijing, China, 08 August 2010 - 12 August 2010, http://dx.doi.org/10.1007/978-94-007-4911-5-13

Zhang LC; Wang CY, 2009, 'Effectivewall thickness of single-walled carbon nanotubes for multi-scale analysis: The problem and a possible solution', in IUTAM Bookseries, pp. 53 - 61, http://dx.doi.org/10.1007/978-1-4020-9557-3_7

Wang WL; Gu YT; Zhang LC, 2008, 'Crack analysis using an improved meshless technique with irregular nodes', in Advanced Materials Research, pp. 263 - 266, http://dx.doi.org/10.4028/0-87849-475-8.263

Hu NS; Zhang LC, 2003, 'A study on the grindability of multidirectional carbon fibre-reinforced plastics', in Journal of Materials Processing Technology, pp. 152 - 156, http://dx.doi.org/10.1016/S0924-0136(03)00704-0

Nguyen T; Zhang LC, 2003, 'An assessment of the applicability of cold air and oil mist in surface grinding', in Journal of Materials Processing Technology, pp. 224 - 230, http://dx.doi.org/10.1016/S0924-0136(03)00714-3

Mahdi M; Zhang LC, 2001, 'A finite element model for the orthogonal cutting of fiber-reinforced composite materials', in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, ELSEVIER SCIENCE SA, SOUTH KOREA, SEOUL, pp. 373 - 377, presented at 5th Asia-Pacific Conference on Materials Processing, SOUTH KOREA, SEOUL, 25 June 2001 - 27 June 2001, http://dx.doi.org/10.1016/S0924-0136(01)00675-6

Mahdi M; Zhang LC, 2001, 'An adaptive three-dimensional finite element algorithm for the orthogonal cutting of composite materials', in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, ELSEVIER SCIENCE SA, SOUTH KOREA, SEOUL, pp. 368 - 372, presented at 5th Asia-Pacific Conference on Materials Processing, SOUTH KOREA, SEOUL, 25 June 2001 - 27 June 2001, http://dx.doi.org/10.1016/S0924-0136(01)00676-8

Zhang LC; Zhang HJ; Wang XM, 2001, 'A force prediction model for cutting unidirectional fibre-reinforced plastics', in Machining Science and Technology, pp. 293 - 305, http://dx.doi.org/10.1081/MST-100108616

Zhang LC; Tanaka H, 1997, 'Atomic scale deformation in silicon monocrystals induced by two-body and three-body contact sliding', in TRIBOLOGY INTERNATIONAL, ELSEVIER SCI LTD, ENGLAND, INST PHYSICS, LONDON, pp. 425 - 433, presented at Conference on Tribology of Information Storage Devices (TISD 97), ENGLAND, INST PHYSICS, LONDON, 01 December 1997 - 03 December 1997, http://dx.doi.org/10.1016/S0301-679X(98)00064-4