Back to

Mr Majid Asnavandi

Senior Technical Officer
Science
School of Materials Science & Engineering
  • Journal articles | 2025
    Lashgari HR; Asnavandi M; Zangeneh S, 2025, 'Failure analysis and microstructural restoration of a cast duplex stainless steel coupling in a desalination plant', Engineering Failure Analysis, 170, http://dx.doi.org/10.1016/j.engfailanal.2025.109284
    Journal articles | 2025
    Lashgari HR; Asnavandi M; Zhang J; Liu Y; Li S, 2025, 'Failure analysis and rejuvenation heat treatment of a martensitic stainless steel gate valve stem', Engineering Failure Analysis, 175, pp. 109591 - 109591, http://dx.doi.org/10.1016/j.engfailanal.2025.109591
    Journal articles | 2022
    Mirzaee-Moghadam M; Lashgari HR; Zangeneh S; Rasaee S; Seyfor M; Asnavandi M; Mojtahedi M, 2022, 'Dry sliding wear characteristics, corrosion behavior, and hot deformation properties of eutectic Al–Si piston alloy containing Ni-rich intermetallic compounds', Materials Chemistry and Physics, 279, http://dx.doi.org/10.1016/j.matchemphys.2022.125758
    Journal articles | 2021
    Lashgari HR; Li S; Kong C; Asnavandi M; Zangeneh S, 2021, 'Rotary friction welding of additively manufactured 17-4PH stainless steel', Journal of Manufacturing Processes, 64, pp. 1517 - 1528, http://dx.doi.org/10.1016/j.jmapro.2021.03.008
    Journal articles | 2018
    Asnavandi M; Suryanto BHR; Yang W; Bo X; Zhao C, 2018, 'Dynamic Hydrogen Bubble Templated NiCu Phosphide Electrodes for pH-Insensitive Hydrogen Evolution Reactions', ACS Sustainable Chemistry and Engineering, 6, pp. 2866 - 2871, http://dx.doi.org/10.1021/acssuschemeng.7b02492
    Journal articles | 2018
    Asnavandi M; Yin Y; Li Y; Sun C; Zhao C, 2018, 'Promoting Oxygen Evolution Reactions through Introduction of Oxygen Vacancies to Benchmark NiFe-OOH Catalysts', ACS Energy Letters, 3, pp. 1515 - 1520, http://dx.doi.org/10.1021/acsenergylett.8b00696
    Journal articles | 2018
    Lashgari HR; Kong C; Asnavandi M; Zangeneh S, 2018, 'The effect of friction stir processing (FSP) on the microstructure, nanomechanical and corrosion properties of low carbon CoCr28Mo5 alloy', Surface and Coatings Technology, 354, pp. 390 - 404, http://dx.doi.org/10.1016/j.surfcoat.2018.09.039
    Journal articles | 2018
    Zangeneh S; Lashgari HR; Asnavandi M, 2018, 'The effect of long-term service exposure on the stability of carbides in Co–Cr–Ni–W (X-45) superalloy', Engineering Failure Analysis, 84, pp. 276 - 286, http://dx.doi.org/10.1016/j.engfailanal.2017.11.018
    Journal articles | 2017
    Asnavandi M; Kahram M; Rezaei M; Rezakhani D, 2017, 'Fire-Side Corrosion: A Case Study of Failed Tubes of a Fossil Fuel Boiler', International Journal of Corrosion, 2017, pp. 1 - 8, http://dx.doi.org/10.1155/2017/7367046
    Journal articles | 2017
    Asnavandi M; Zhao C, 2017, 'Autologous growth of nickel oxyhydroxides with: In situ electrochemical iron doping for efficient oxygen evolution reactions', Materials Chemistry Frontiers, 1, pp. 2541 - 2546, http://dx.doi.org/10.1039/c7qm00367f
    Journal articles | 2017
    Asnavandi M; Zhao C, 2017, 'Hydrogen Bubble-Assisted Electrodeposition of Metal Nanoparticles from Protic Ionic Liquids for Electrocatalysis', ACS Sustainable Chemistry and Engineering, 5, pp. 85 - 89, http://dx.doi.org/10.1021/acssuschemeng.6b02219
    Journal articles | 2015
    Asnavandi M; Suryanto BHR; Zhao C, 2015, 'Controlled electrodeposition of nanostructured Pd thin films from protic ionic liquids for electrocatalytic oxygen reduction reactions', RSC Advances, 5, pp. 74017 - 74023, http://dx.doi.org/10.1039/c5ra13898a
    Journal articles | 2015
    Kahram M; Asnavandi M; Koshy P; Sorrell CC, 2015, 'Corrosion Investigation of Duplex Stainless Steels in Chlorinated Solutions', Steel Research International, pp. n/a - n/a, http://dx.doi.org/10.1002/srin.201400293
    Journal articles | 2014
    Kahram M; Asnavandi M; Dolati A, 2014, 'Synthesis and electrochemical characterization of sol-gel-derived RuO 2/carbon nanotube composites', Journal of Solid State Electrochemistry, 18, pp. 993 - 1003, http://dx.doi.org/10.1007/s10008-013-2346-2
    Journal articles | 2013
    Asnavandi M; Ghorbani M; Kahram M, 2013, 'Production of Cu-Sn-graphite-SiC composite coatings by electrodeposition', Surface and Coatings Technology, 216, pp. 207 - 214, http://dx.doi.org/10.1016/j.surfcoat.2012.11.042
    Journal articles | 2012
    Asnavandi M; Ghorbani M, 2012, 'Use of response surface methodology for evaluation of effective parameters in codeposition of Cu-Sn alloys using non-cyanide electroplating solution', Transactions of the Institute of Metal Finishing, 90, pp. 38 - 43, http://dx.doi.org/10.1179/174591911X13226697790578