Dr Nima Haghdadi
Lecturer

Dr Nima Haghdadi

  • Ph.D., Institute for Frontier Materials, Deakin University, VIC, Australia (2014 - 2017)
  • M.Sc., University of Tehran, Tehran, Iran ( 2010 -  2013)
Science
School of Materials Science & Engineering

I am a lecturer in the School of Materials Science & Engineering. I was awarded my PhD in 2017 from Deakin University (Australia), for a thesis on thermo-mechanical processing of duplex stainless steels. I am a former Victoria Fellow and Alfred Deakin Research Fellow, and recipient of Thermo Fisher Scientific Cowley-Moodie award for an outstanding contribution to physical sciences using Electron Microscopy in Australia (2018). In the last six years I have also been a visiting scientist at The University of British Columbia and McGill University in Canada, Max-Planck-Institut für Eisenforschung GmbH in Germany and TU-Vienna in Austria. I am currently the lead researcher of the UNSW-based team of our AUSMURI project on the role of interfaces during additive manufacturing.

Phone
+61 2 9065 3635
Location
Room 323.21, Hilmer Building (E10) Kensington, New South Wales, 2052 Australia
  • Book Chapters | 2021
    Primig S; Theska F; Haghdadi N, 2021, 'Electron Microscopy Methods', in Encyclopedia of Materials: Metals and Alloys, Elsevier, pp. 203 - 211, http://dx.doi.org/10.1016/B978-0-12-819726-4.00031-4
  • Journal articles | 2022
    Haghdadi N; Chen H; Chen Z; Babu S; Liao X; Ringer S; Primig S, 2022, 'Intergranular precipitation and chemical fluctuations in an additively manufactured 2205 duplex stainless steel', Scripta Materialia, http://dx.doi.org/10.1016/j.scriptamat.2022.114894
    Journal articles | 2022
    Haghdadi N; Ledermueller C; Chen H; Chen Z; Liu Q; Li X; Rohrer G; Liao X; Ringer S; Primig S, 2022, 'Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment', Materials Science and Engineering A, vol. 835, pp. 142695 - 142695, http://dx.doi.org/10.1016/j.msea.2022.142695
    Journal articles | 2022
    Haines MP; Rielli VV; Primig S; Haghdadi N, 2022, 'Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques', Journal of Materials Science, vol. 57, pp. 14135 - 14187, http://dx.doi.org/10.1007/s10853-022-07501-4
    Journal articles | 2022
    Hazarabedian MS; Haghdadi N; Primig S; Lison-Pick M; Quadir MZ; Ferry M; Iannuzzi M, 2022, 'Formation of intergranular phases in precipitation hardening nickel-based alloy 725', Acta Materialia, vol. 236, pp. 118108 - 118108, http://dx.doi.org/10.1016/j.actamat.2022.118108
    Journal articles | 2022
    He XY; Wang H; Zhu ZG; Wang LZ; Liu JQ; Haghdadi N; Nai SML; Huang J; Primig S; Ringer SP; Liao XZ, 2022, 'Texture evolution in a CrMnFeCoNi high-entropy alloy manufactured by laser powder bed fusion', Journal of Materials Science, vol. 57, pp. 9714 - 9725, http://dx.doi.org/10.1007/s10853-022-07025-x
    Journal articles | 2022
    Laleh M; Haghdadi N; Hughes AE; Primig S; Tan MYJ, 2022, 'Enhancing the repassivation ability and localised corrosion resistance of an additively manufactured duplex stainless steel by post-processing heat treatment', Corrosion Science, vol. 198, pp. 110106 - 110106, http://dx.doi.org/10.1016/j.corsci.2022.110106
    Journal articles | 2022
    Moyle M; Ledermueller C; Zou Z; Primig S; Haghdadi N, 2022, 'Multi-scale characterisation of microstructure and texture of 316L stainless steel manufactured by laser powder bed fusion', Materials Characterization, vol. 184, pp. 111663 - 111663, http://dx.doi.org/10.1016/j.matchar.2021.111663
    Journal articles | 2022
    Moyle MS; Haghdadi N; Davids WJ; Liao XZ; Ringer SP; Primig S, 2022, 'Evidence of in-situ Cu clustering as a function of laser power during laser powder bed fusion of 17–4 PH stainless steel', Scripta Materialia, vol. 219, pp. 114896 - 114896, http://dx.doi.org/10.1016/j.scriptamat.2022.114896
    Journal articles | 2022
    Moyle MS; Haghdadi N; Liao XZ; Ringer SP; Primig S, 2022, 'On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder bed fusion: Towards textural design', Journal of Materials Science and Technology, vol. 117, pp. 183 - 195, http://dx.doi.org/10.1016/j.jmst.2021.12.015
    Journal articles | 2022
    Nie S; Chin RL; Soufiani AM; Mehl T; Theska F; Haghdadi N; Primig S; Chan C; Trupke T; Hameiri Z, 2022, 'Temperature sensitivity maps of silicon wafers from photoluminescence imaging: The effect of gettering and hydrogenation', Progress in Photovoltaics: Research and Applications, http://dx.doi.org/10.1002/pip.3579
    Journal articles | 2021
    DeMott R; Haghdadi N; Gandomkar Z; Liao X; Ringer S; Primig S, 2021, 'Formation and 3D morphology of interconnected α microstructures in additively manufactured Ti-6Al-4V', Materialia, vol. 20, pp. 101201 - 101201, http://dx.doi.org/10.1016/j.mtla.2021.101201
    Journal articles | 2021
    DeMott R; Haghdadi N; Kong C; Gandomkar Z; Kenney M; Collins P; Primig S, 2021, '3D electron backscatter diffraction characterization of fine α titanium microstructures: collection, reconstruction, and analysis methods', Ultramicroscopy, vol. 230, pp. 113394 - 113394, http://dx.doi.org/10.1016/j.ultramic.2021.113394
    Journal articles | 2021
    DeMott R; Haghdadi N; Liao X; Ringer SP; Primig S, 2021, '3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4 V', Journal of Materials Science, vol. 56, pp. 14763 - 14782, http://dx.doi.org/10.1007/s10853-021-06216-2
    Journal articles | 2021
    Haghdadi N; Laleh M; Chen H; Chen Z; Ledermueller C; Liao X; Ringer S; Primig S, 2021, 'On the pitting corrosion of 2205 duplex stainless steel produced by laser powder bed fusion additive manufacturing in the as-built and post-processed conditions', Materials and Design, vol. 212, pp. 110260 - 110260, http://dx.doi.org/10.1016/j.matdes.2021.110260
    Journal articles | 2021
    Haghdadi N; Laleh M; Moyle M; Primig S, 2021, 'Additive manufacturing of steels: a review of achievements and challenges', Journal of Materials Science, vol. 56, pp. 64 - 107, http://dx.doi.org/10.1007/s10853-020-05109-0
    Journal articles | 2021
    Laleh M; Hughes AE; Tan MY; Rohrer GS; Primig S; Haghdadi N, 2021, 'Grain boundary character distribution in an additively manufactured austenitic stainless steel', Scripta Materialia, vol. 192, pp. 115 - 119, http://dx.doi.org/10.1016/j.scriptamat.2020.10.018
    Journal articles | 2021
    Lim B; Chen H; Chen Z; Haghdadi N; Liao X; Primig S; Babu SS; Breen AJ; Ringer SP, 2021, 'Microstructure-property gradients in Ni-based superalloy (Inconel 738) additively manufactured via electron beam powder bed fusion', Additive Manufacturing, vol. 46, pp. 102121 - 102121, http://dx.doi.org/10.1016/j.addma.2021.102121
    Journal articles | 2020
    Haghdadi N; Cizek P; Hodgson PD; He Y; Sun B; Jonas JJ; Rohrer GS; Beladi H, 2020, 'New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation', Journal of Materials Science, vol. 55, pp. 5322 - 5339, http://dx.doi.org/10.1007/s10853-020-04358-3
    Journal articles | 2020
    Haghdadi N; DeMott R; Stephenson PL; Liao XZ; Ringer SP; Primig S, 2020, 'Five-parameter characterization of intervariant boundaries in additively manufactured Ti-6Al-4V', Materials and Design, vol. 196, pp. 109177 - 109177, http://dx.doi.org/10.1016/j.matdes.2020.109177
    Journal articles | 2020
    Haghdadi N; Primig S; Annasamy M; Cizek P; Hodgson PD; Fabijanic DM, 2020, 'Dynamic recrystallization in AlXCoCrFeNi duplex high entropy alloys', Journal of Alloys and Compounds, vol. 830, http://dx.doi.org/10.1016/j.jallcom.2020.154720
    Journal articles | 2020
    Haghdadi N; Primig S; Annasamy M; Cizek P; Hodgson PD; Fabijanic DM, 2020, 'On the hot-worked microstructure of a face-centered cubic Al0.3CoCrFeNi high entropy alloy', Scripta Materialia, vol. 178, pp. 144 - 149, http://dx.doi.org/10.1016/j.scriptamat.2019.11.022
    Journal articles | 2020
    Haghdadi N; Whitelock E; Lim B; Chen H; Liao X; Babu SS; Ringer SP; Primig S, 2020, 'Multimodal γ′ precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing', Journal of Materials Science, vol. 55, pp. 13342 - 13350, http://dx.doi.org/10.1007/s10853-020-04915-w
    Journal articles | 2020
    Joseph J; Haghdadi N; Annasamy M; Kada S; Hodgson PD; Barnett MR; Fabijanic DM, 2020, 'On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature', Scripta Materialia, vol. 186, pp. 230 - 235, http://dx.doi.org/10.1016/j.scriptamat.2020.05.053
    Journal articles | 2020
    Stephenson PL; Haghdadi N; DeMott R; Liao XZ; Ringer SP; Primig S, 2020, 'Effect of scanning strategy on variant selection in additively manufactured Ti-6Al-4V', Additive Manufacturing, vol. 36, pp. 101581 - 101581, http://dx.doi.org/10.1016/j.addma.2020.101581
    Journal articles | 2019
    Annasamy M; Haghdadi N; Taylor A; Hodgson P; Fabijanic D, 2019, 'Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression', Materials Science and Engineering A, vol. 745, pp. 90 - 106, http://dx.doi.org/10.1016/j.msea.2018.12.102
    Journal articles | 2019
    Annasamy M; Haghdadi N; Taylor A; Hodgson P; Fabijanic D, 2019, 'Static recrystallization and grain growth behaviour of Al 0.3 CoCrFeNi high entropy alloy', Materials Science and Engineering A, vol. 754, pp. 282 - 294, http://dx.doi.org/10.1016/j.msea.2019.03.088
    Journal articles | 2019
    Haghdadi N; Cizek P; Hodgson PD; Beladi H, 2019, 'Microstructure dependence of impact toughness in duplex stainless steels', Materials Science and Engineering A, vol. 745, pp. 369 - 378, http://dx.doi.org/10.1016/j.msea.2018.12.117
    Journal articles | 2019
    Haghdadi N; Guo T; Ghaderi A; Hodgson PD; Barnett MR; Fabijanic DM, 2019, 'The scratch behaviour of AlXCoCrFeNi (x=0.3 and 1.0) high entropy alloys', Wear, vol. 428-429, pp. 293 - 301, http://dx.doi.org/10.1016/j.wear.2019.03.026
    Journal articles | 2019
    Haghdadi N; Laleh M; Kosari A; Moayed MH; Cizek P; Hodgson PD; Beladi H, 2019, 'The effect of phase transformation route on the intergranular corrosion susceptibility of 2205 duplex stainless steel', Materials Letters, vol. 238, pp. 26 - 30, http://dx.doi.org/10.1016/j.matlet.2018.11.143
    Journal articles | 2019
    Joseph J; Haghdadi N; Shamlaye K; Hodgson P; Barnett M; Fabijanic D, 2019, 'The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures', Wear, vol. 428-429, pp. 32 - 44, http://dx.doi.org/10.1016/j.wear.2019.03.002
    Journal articles | 2019
    Laleh M; Hughes AE; Xu W; Haghdadi N; Wang K; Cizek P; Gibson I; Tan MY, 2019, 'On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting', Corrosion Science, vol. 161, http://dx.doi.org/10.1016/j.corsci.2019.108189
    Journal articles | 2018
    Haghdadi N; Cizek P; Hodgson PD; Tari V; Rohrer GS; Beladi H, 2018, 'Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel', Acta Materialia, vol. 145, pp. 196 - 209, http://dx.doi.org/10.1016/j.actamat.2017.11.057
    Journal articles | 2018
    Haghdadi N; Cizek P; Hodgson PD; Tari V; Rohrer GS; Beladi H, 2018, 'Five-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel', Philosophical Magazine, vol. 98, pp. 1284 - 1306, http://dx.doi.org/10.1080/14786435.2018.1434321
    Journal articles | 2017
    Abedi HR; Hanzaki AZ; Haghdadi N; Hodgson PD, 2017, 'Substructure induced twinning in low density steel', Scripta Materialia, vol. 128, pp. 69 - 73, http://dx.doi.org/10.1016/j.scriptamat.2016.10.001
    Journal articles | 2017
    Abedi HR; Zarei Hanzaki A; Liu Z; Xin R; Haghdadi N; Hodgson PD, 2017, 'Continuous dynamic recrystallization in low density steel', Materials and Design, vol. 114, pp. 55 - 64, http://dx.doi.org/10.1016/j.matdes.2016.10.044
    Journal articles | 2017
    Haghdadi N; Abou-Ras D; Cizek P; Hodgson PD; Rollett AD; Beladi H, 2017, 'Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach', Materials Letters, vol. 196, pp. 264 - 268, http://dx.doi.org/10.1016/j.matlet.2017.03.090
    Journal articles | 2017
    Haghdadi N; Cizek P; Beladi H; Hodgson PD, 2017, 'A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure', Acta Materialia, vol. 126, pp. 44 - 57, http://dx.doi.org/10.1016/j.actamat.2016.12.045
    Journal articles | 2017
    Haghdadi N; Cizek P; Beladi H; Hodgson PD, 2017, 'Dynamic Restoration Processes in a 23Cr-6Ni-3Mo Duplex Stainless Steel: Effect of Austenite Morphology and Interface Characteristics', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, pp. 4803 - 4820, http://dx.doi.org/10.1007/s11661-017-4227-2
    Journal articles | 2017
    Haghdadi N; Cizek P; Beladi H; Hodgson PD, 2017, 'Hot deformation and restoration mechanisms in duplex stainless steels: Effect of strain rate', Metallurgia Italiana, vol. 109, pp. 5 - 16
    Journal articles | 2017
    Haghdadi N; Cizek P; Beladi H; Hodgson PD, 2017, 'The austenite microstructure evolution in a duplex stainless steel subjected to hot deformation', Philosophical Magazine, vol. 97, pp. 1209 - 1237, http://dx.doi.org/10.1080/14786435.2017.1293860
    Journal articles | 2017
    Haghdadi N; Zarei-Hanzaki A; Farabi E; Cizek P; Beladi H; Hodgson PD, 2017, 'Strain rate dependence of ferrite dynamic restoration mechanism in a duplex low-density steel', Materials and Design, vol. 132, pp. 360 - 366, http://dx.doi.org/10.1016/j.matdes.2017.07.009
    Journal articles | 2017
    Haghdadi N; Zarei-Hanzaki A; Kawasaki M; Phillion AB; Hodgson PD, 2017, 'Effect of Severe Plastic Deformation and Subsequent Silicon Spheroidizing Treatment on the Microstructure and Mechanical Properties of an Al–Si–Mg Alloy', Advanced Engineering Materials, vol. 19, http://dx.doi.org/10.1002/adem.201700064
    Journal articles | 2016
    Haghdadi N; Martin D; Hodgson P, 2016, 'Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel', Materials and Design, vol. 106, pp. 420 - 427, http://dx.doi.org/10.1016/j.matdes.2016.05.118
    Journal articles | 2016
    Haghdadi N; Zarei-Hanzaki A; Abedi HR; Abou-Ras D; Kawasaki M; Zhilyaev AP, 2016, 'Evolution of microstructure and mechanical properties in a hypoeutectic Al-Si-Mg alloy processed by accumulative back extrusion', Materials Science and Engineering A, vol. 651, pp. 269 - 279, http://dx.doi.org/10.1016/j.msea.2015.10.066
    Journal articles | 2015
    Abedi HR; Zarei-Hanzaki A; Karimi E; Haghdadi N, 2015, 'The Shear Punch Jump Test—a Novel Application of a Small Specimen Testing Technique for Rapid Evaluation of Deformation Mechanisms', Experimental Mechanics, vol. 55, pp. 1569 - 1573, http://dx.doi.org/10.1007/s11340-015-0064-7
    Journal articles | 2015
    Haghdadi N; Phillion AB; Maijer DM, 2015, 'Microstructure Characterization and Thermal Analysis of Aluminum Alloy B206 During Solidification', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 46, pp. 2073 - 2081, http://dx.doi.org/10.1007/s11661-015-2780-0
    Journal articles | 2015
    Jamaly N; Haghdadi N; Phillion AB, 2015, 'Microstructure, Macrosegregation, and Thermal Analysis of Direct Chill Cast AA5182 Aluminum Alloy', Journal of Materials Engineering and Performance, vol. 24, pp. 2067 - 2073, http://dx.doi.org/10.1007/s11665-015-1480-7
    Journal articles | 2015
    Razmpoosh MH; Zarei-Hanzaki A; Haghdadi N; Cho JH; Kim WJ; Heshmati-Manesh S, 2015, 'Thermal stability of an ultrafine-grained dual phase TWIP steel', Materials Science and Engineering A, vol. 638, pp. 5 - 14, http://dx.doi.org/10.1016/j.msea.2015.03.066
    Journal articles | 2014
    Abbasi-Bani A; Zarei-Hanzaki A; Pishbin MH; Haghdadi N, 2014, 'A comparative study on the capability of Johnson-Cook and Arrhenius-type constitutive equations to describe the flow behavior of Mg-6Al-1Zn alloy', Mechanics of Materials, vol. 71, pp. 52 - 61, http://dx.doi.org/10.1016/j.mechmat.2013.12.001
    Journal articles | 2014
    Haghdadi N; Zarei-Hanzaki A; Abou-Ras D; Maghsoudi MH; Ghorbani A; Kawasaki M, 2014, 'An investigation into the homogeneity of microstructure, strain pattern and hardness of pure aluminum processed by accumulative back extrusion', Materials Science and Engineering A, vol. 595, pp. 179 - 187, http://dx.doi.org/10.1016/j.msea.2013.11.077
    Journal articles | 2014
    Mirzaei A; Zarei-Hanzaki A; Haghdadi N; Marandi A, 2014, 'Constitutive description of high temperature flow behavior of Sanicro-28 super-austenitic stainless steel', Materials Science and Engineering A, vol. 589, pp. 76 - 82, http://dx.doi.org/10.1016/j.msea.2013.09.036
    Journal articles | 2013
    Haghdadi N; Zarei-Hanzaki A; Abou-Ras D, 2013, 'Microstructure and mechanical properties of commercially pure aluminum processed by accumulative back extrusion', Materials Science and Engineering A, vol. 584, pp. 73 - 81, http://dx.doi.org/10.1016/j.msea.2013.06.060
    Journal articles | 2013
    Haghdadi N; Zarei-Hanzaki A; Heshmati-Manesh S; Abedi HR; Hassas-Irani SB, 2013, 'The semisolid microstructural evolution of a severely deformed A356 aluminum alloy', Materials and Design, vol. 49, pp. 878 - 887, http://dx.doi.org/10.1016/j.matdes.2013.02.051
    Journal articles | 2013
    Haghdadi N; Zarei-Hanzaki A; Khalesian AR; Abedi HR, 2013, 'Artificial neural network modeling to predict the hot deformation behavior of an A356 aluminum alloy', Materials and Design, vol. 49, pp. 386 - 391, http://dx.doi.org/10.1016/j.matdes.2012.12.082
    Journal articles | 2013
    Haghdadi N; Zarei-Hanzaki A; Roostaei AA; Hemmati AR, 2013, 'Evaluating the mechanical properties of a thermomechanically processed unmodified A356 Al alloy employing shear punch testing method', Materials and Design, vol. 43, pp. 419 - 425, http://dx.doi.org/10.1016/j.matdes.2012.07.001
    Journal articles | 2012
    Erfanian-Naziftoosi HR; Haghdadi N; Kiani-Rashid AR, 2012, 'The effect of isothermal heat treatment time on the microstructure and properties of 2.11% Al austempered ductile iron', Journal of Materials Engineering and Performance, vol. 21, pp. 1785 - 1792, http://dx.doi.org/10.1007/s11665-011-0086-y
    Journal articles | 2012
    Haghdadi N; Bazaz B; Erfanian-Naziftoosi HR; Kiani-Rashid AR, 2012, 'Microstructural and mechanical characteristics of Al-alloyed ductile iron upon casting and annealing', International Journal of Minerals, Metallurgy and Materials, vol. 19, pp. 812 - 820, http://dx.doi.org/10.1007/s12613-012-0633-z
    Journal articles | 2012
    Haghdadi N; Zarei-Hanzaki A; Abedi HR, 2012, 'The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain', Materials Science and Engineering A, vol. 535, pp. 252 - 257, http://dx.doi.org/10.1016/j.msea.2011.12.076
    Journal articles | 2012
    Haghdadi N; Zarei-Hanzaki A; Abedi HR; Sabokpa O, 2012, 'The effect of thermomechanical parameters on the eutectic silicon characteristics in a non-modified cast A356 aluminum alloy', Materials Science and Engineering A, vol. 549, pp. 93 - 99, http://dx.doi.org/10.1016/j.msea.2012.04.010
    Journal articles | 2012
    Marandi A; Zarei-Hanzaki A; Haghdadi N; Eskandari M, 2012, 'The prediction of hot deformation behavior in Fe-21Mn-2.5Si-1.5Al transformation-twinning induced plasticity steel', Materials Science and Engineering A, vol. 554, pp. 72 - 78, http://dx.doi.org/10.1016/j.msea.2012.06.014
    Journal articles | 2012
    Rokni MR; Zarei-Hanzaki A; Abedi HR; Haghdadi N, 2012, 'Microstructure evolution and mechanical properties of backward thixoextruded 7075 aluminum alloy', Materials and Design, vol. 36, pp. 557 - 563, http://dx.doi.org/10.1016/j.matdes.2011.11.061
    Journal articles | 2012
    Sabokpa O; Zarei-Hanzaki A; Abedi HR; Haghdadi N, 2012, 'Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy', Materials and Design, vol. 39, pp. 390 - 396, http://dx.doi.org/10.1016/j.matdes.2012.03.002
  • Conference Papers | 2017
    Haghdadi N; Cizek P; Beladi H; Hodgson PD, 2017, 'Hot deformation and restoration mechanisms in duplex stainless steels: Effect of strain rate', in ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition

  • Victoria Fellowship, Victoria’s Government financial support for a study mission in a world-class overseas laboratory (2018)
  • Cowley-Moodie award, for an outstanding contribution to Physical Sciences through electron microscopy (2018)
  • Alfred Deakin Postdoctoral Research Fellowship (2018)
  • Finalist for the “Victoria’s International Student of the Year” recognized by Victoria’s Government (2017)
  • Acta Materialia Student Award (2017)
  • Runner-up in the competition for the Philosophical Magazine’s James Clerk Maxwell Writers Prize (2017)
  • Finalist for the Alfred Deakin Medal for the best doctoral thesis with significant research impact, Deakin University (2017)
  • Graduate Dean's Entrance Scholarship, College of graduate studies, The University of British Columbia (2013)
  • University Graduate Fellowship, College of graduate studies, The University of British Columbia (2013)
  • Best Masters Student Research Award, School of Metallurgy and Materials Engineering, University of Tehran (2012)
  • Institute for Frontier Materials’ early career research (ECR) award to attend THERMEC conference in Paris, France (2018)
  • Australian Microscopy and Microanalysis Society’s Award to attend IMC19 conference in Sydney (2018)
  • Institute for Frontier Materials’ Publication Scholarship (2017)
  • Best Student Research Award in the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), Pittsburgh, USA (2016)
  • Australian Microscopy and Microanalysis Society’s bursary to attend ACMM24 conference in Melbourne (2016)
  • Institute for Frontier Materials’ Travel Award to undertake research at McGill University (2016)

Additive manufacturing; Thermomechanical processing; Phase transformations in metallic materials; Grain boundary and interface engineering; Wear resistance of metallic materials; High Entropy Alloys

See http://www.engineeringmicrostructures.com  and  https://www.3dadditive.com.au

Materials Australia Councillor of NSW (2020- ongoing)

Deakin’s representative in the Materials Australia Victoria Council (2016)

Australian Microscopy & Microanalysis Society

VESKI

  • MATS6101 (Thermodynamics and Phase Equilibria)
  • Metallurgy for the Non-Metallurgist for Materials Australia NSW