Print, copy & scan services
The Academy Library has two multifunction devices (MFDs) which serve as printers, copiers and scanners for use by UNSW. One machine is located in the Cyber kitchen area (lower-ground, Bldg. 13) and the other is in the Cadet Mess (Bldg. 4).
These services can be paid for with the credit on your Student/Staff ID card. Please visit https://recharge.it.unsw.edu.au/mymonitor/ to manage your printing credit.
For assistance with the MFDs visit library staff at our alternate Service Desk on the lower-ground floor of Lecture Theatre North (B32, near SR03).
Copyright compliance is your responsibility. Observe the Copyright Act 1968 provisions and regulations at all times when accessing and printing resources both on and off-campus. A section of the Act is displayed near the MFDs.
Explore
-
Single-sided Double-sided A4 B&W: $0.11 A4 B&W: $0.20 A4 Colour: $0.50 A4 Colour: $0.95 A3 B&W: $0.22 A3 B&W: $0.40 A3 Colour: $1.00 A3 Colour: $1.90 You receive a 10% discount for double-sided services.
Scanning charge is 4 cents per scan.
Add credit online at https://recharge.it.unsw.edu.au/mymonitor/
-
This service is only available to clients with zIDs. Make sure you have associated your card and are connected to the internet.
Step 1 - Visit https://recharge.it.unsw.edu.au/mymonitor/ and log in with your UNSW zID and zPass.
Step 2 - Select the file(s) you wish to print.
Step 3 – Once the status of the job is “waiting for release”, Go to any printer and scan your UNSW ID Card.
Step 4 - Select ‘Print Release’ to print your job.
-
UNSW Canberra students/staff Visitors or non-Canberra clients At the copier, pass your student/staff card over detector to login. At the copier, input the receipt number at the Account screen. Account screen displays with account. Press the 'Copy' button on left-hand side of display pad. Press the 'Copy' button on left-hand side of display pad. Follow screen instructions. Follow screen instructions. Remember to logout by pressing 'Logout' on the account screen. Remember to logout by either pressing 'Logout' on the account screen or passing your card over the detector. -
This service is only available to clients with zIDs.
Scanning charge is 4 cents per scan.
- Pass your student/staff ID card over the swipe pad to login.
- The screen will display your account.
- Press the 'Scanner' button on left-hand side of the display pad.
- Press 'Scan settings' to change the settings (e.g. colour/black & white/grayscale, resolution, etc.), then press OK.
- Select 'Email'.
- Select 'Manual entry', type an email address (zlD@student.unsw.edu.au) and press OK.
- Feed your document on to the tray on the top of the machine.
- Press the 'Start' button on your right-hand side.
- When you have finished scanning, press the [#] button to finish the job.
- Remember to logout by either pressing 'Logout' on the account screen or passing yout card over the swipe pad.
